Sanyo Projector Plc Xc56 User Manual

ENGLISH

31
ENGLISH
Chapter 4 
 Controlling the Projector
4
Describes controlling and setting of the projector by using the web 
browser. 



Chapter 4 Controlling the Projector

Power control and status check
 
Click Power  &  Status  on  the  main  menu.  The  control  page  will  be  dis-
played.
By  clicking ON  or Standby  button  on  the  page,  the  power  of  the  projector  can  be  con-
trolled. 
Item   Description
PJ status Power  .........................  
Displays the status of the lamp. (ON, OFF, On starting up, On cooling down) Status ..........................  
Displays the status of the projector's power....


ENGLISH

 

About projector condition
Status Description
Normal ...............................................................Projector is operating normally.Power 	management 	in 	operation ...........Power management is operating
Lamp	failure  ...................................................Lamp failure is occurring
Abnormal	 Temperature  .........................The temperature of the projector became too high
Standby	after	Abnormal	 Temp. ........  
Projector detects abnormal temp....



Chapter 4 Controlling the Projector

Control
Click Control  on  the  main  menu.  The  setting  method  differs  depending 
on  the  contents  of  the  page.  Click  on  the  page  number  to  change  pages 
and select desired setting items.
✐  Please  see  the  owner's  manual  of  the  projector  to  have  the  further  information 
of each control item. 
 ✐   The control page displays valid control items depending on the selected input mode, signal or  functions of the projector you...

5
ENGLISH

 

System
This  function  is  to  select  the  system  of  signal 
input  to  the  projector.  The  available  system 
mode  are  listed  on  the  pull-down  menu  but-
ton  according  to  the  input  signal.  Selec t  a 
system and then click Set button.
Control
✐  If the mode (Mode1 to Mode5, ExMode6 to ExMode50) which is stored in the item "PC Adjustment" (+ p.38) is available, they are also listed together with the above mode.
Available selection at the RGB(PC analog) input...



Chapter 4 Controlling the Projector

Sound 
T his  func tion  is  to  adjust  the  sound  of  the 
projector.    The  values  in  the  text  box  repre-
sent the current control value or status.
Item Description
Volume ................... 
Adjusts the sound volume from the speaker. (0 ~ 63)Mute  .........................  
Suppresses the sound. (ON, OFF) 


ENGLISH

 

Item Description
Contrast ..............................  
Adjusts picture con-trast (0~ 63)Brightness .........................  
Adjusts picture bright-ness (0~ 63)Color ......................................  
Adjusts picture color saturation (0~ 63)Tint .........................................  
Adjusts picture hue (0~ 63)
Color	temp.  ....................... 
Sets a color temperature mode. {High, Mid, Low, XLow, User, Colorboard, Blackboard(Green)}White	Balance
	 Red,	Green,...



Chapter 4 Controlling the Projector

PC adjustment
Click PC  Adj.  on  the  main  menu.  This  function  is  to  adjust  the  signal  from 
the  computer  connected  to  the  projector  to  obtain  the  proper  picture 
image on the screen. 
Item Description
Current	mode  ...... 
Displays a current mode like VGA, SVGA, XGA. SXGA, UXGA, WXGA, etc. or Mode1 - Mode5 which are the customized mode created by using the "Mode Store" function described below.
Auto	PC	adj..........  
Performs...


ENGLISH

 

Setting up the projector
Click Setting  on  the  main  menu.  This  function  is  to  set  up  the  projector. 
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.
Setting up the projector
Item Description
Screen .....................  
Switches the screen mode. (Normal, True, Wide, Full, Custom) There may not be avail-able mode depending on the input mode as shown in the table below.
Input sourceScreen mode  Video Computer
Normal 
4 4
True  * 4
Wide...

0

Chapter 4 Controlling the Projector

Item Description
Ceiling .....................  
Sets the image top/bottom and left/right reversed. (ON, OFF)Rear ...........................  
Sets the image left/right reversed. (ON, OFF)
Power	
management  .....  
Sets into the selected power manage-ment mode (Ready, Shutdown, OFF) if the input signal is interrupted and no control key is pressed for the specified period of time.
  * The specified time can be set 1 to 30 min.On	start  .....................