Sanyo Projector Plc Xc56 User Manual
Have a look at the manual Sanyo Projector Plc Xc56 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ENGLISH 31 ENGLISH Chapter 4 Controlling the Projector 4 Describes controlling and setting of the projector by using the web browser.
Chapter 4 Controlling the Projector Power control and status check Click Power & Status on the main menu. The control page will be dis- played. By clicking ON or Standby button on the page, the power of the projector can be con- trolled. Item Description PJ status Power ......................... Displays the status of the lamp. (ON, OFF, On starting up, On cooling down) Status .......................... Displays the status of the projector's power. (Refer to next page.) Power control ........ Controls the projector power by clicking the "ON" or "Standby" button. Popup confirmation window Confirmation window as shown in the below appears when the Standby button is pressed. ✐ The projector cannot be turned on while the projector is on cooling down.✐ The web browser checks and updates the projector's condition every 30 seconds automatically.
ENGLISH About projector condition Status Description Normal ...............................................................Projector is operating normally.Power management in operation ...........Power management is operating Lamp failure ...................................................Lamp failure is occurring Abnormal Temperature .........................The temperature of the projector became too high Standby after Abnormal Temp. ........ Projector detects abnormal temp. and sets into standby mode. Power failure ................................................ Power failure has occurred inside the projector. Projector is turned off. Unplug the AC cord and ask servicing to a qualified service personnel. Service in need ............................................ Projector detects maintenance requirement. Check up LED status of the projector. Power control and status check When a security (PIN code lock) has been set on the projector, you also cannot control it through the network. To control the projector through the network, unlock the security on the projector using with the projector's menu control. Caution about turning on/off the projector via the networks When turning on/off the projector via the networks, preset the projector as fol- lows: 1. Select “Setting” from the Projector menu. 2. Select “Standby mode” from the Setting menu and set it as “Network”. If you set this func tion as Net work , the net work par t of the projec tor is con- stantly provided with power even if the projector is turned off. If you set this as Eco, then the network part will be turned off when you turn off the projector. Consequently, you cannot turn on/off the projector via the networks.
Chapter 4 Controlling the Projector Control Click Control on the main menu. The setting method differs depending on the contents of the page. Click on the page number to change pages and select desired setting items. ✐ Please see the owner's manual of the projector to have the further information of each control item. ✐ The control page displays valid control items depending on the selected input mode, signal or functions of the projector you use, therefore, there may be different controls between the described items and actual control items on the page display. For further information , refer to the projector's owner's manual. ✐ When the projector is in standby, all the controlling items are inactive. Item Description Input ......................... Selects input mode of the projector. Source ..................... Selects signal source of the input. Computer1 : RGB Component RGB(Scart) Computer2 : RGB(PC analog) RGB(PC digital) RGB(AV HDCP) Video S-video Input This function is to select the input mode and source mode of the projector. Click Set but- ton after selecting the input and source mode.
5 ENGLISH System This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu but- ton according to the input signal. Selec t a system and then click Set button. Control ✐ If the mode (Mode1 to Mode5, ExMode6 to ExMode50) which is stored in the item "PC Adjustment" (+ p.38) is available, they are also listed together with the above mode. Available selection at the RGB(PC analog) input Item Description XGA1 ........................ It automatically switches to the proper computer sys-tem of the input signal. * The computer system modes ( VGA, SVGA, XGA. SXGA, UXGA, WXGA...) which meet the input signal are listed. Available selection at the RGB(PC digital) input Item Description D-XGA ...................... It automatically switches to the proper computer sys-tem of the input signal. * The computer system modes (D-VGA, D-SVGA, D-XGA. D-SXGA1...) which meet the input signal are listed. Available selection at the RGB(AV HDCP) input Item Description D-480p .................... It automatically switches to the proper scanning system of the input signal. * The selectable scanning systems are D-480p, D-575p, D-720p, D-1035i and D-1080i. Available selection at the Video/S-video/Scart input Item Description AUTO ........................ It automatically switches to the proper color system of the input signal. * The selectable color systems are PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N. * AUTO is fixed at the Scart input. Available selection at the Component input Item Description AUTO ........................ It automatically switches to the proper scanning system of the input signal. * The selectable scanning systems are 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.
Chapter 4 Controlling the Projector Sound T his func tion is to adjust the sound of the projector. The values in the text box repre- sent the current control value or status. Item Description Volume ................... Adjusts the sound volume from the speaker. (0 ~ 63)Mute ......................... Suppresses the sound. (ON, OFF)
ENGLISH
Item Description
Contrast ..............................
Adjusts picture con-trast (0~ 63)Brightness .........................
Adjusts picture bright-ness (0~ 63)Color ......................................
Adjusts picture color saturation (0~ 63)Tint .........................................
Adjusts picture hue (0~ 63)
Color temp. .......................
Sets a color temperature mode. {High, Mid, Low, XLow, User, Colorboard, Blackboard(Green)}White Balance
Red, Green, Blue ..... Adjusts each white
balance respectively. (0~ 63)
* When changing the value of the
white balance, the color temp. indicates "Adj."Sharpness ................................
Adjusts picture sharpness. (0~ 15)
Gamma ..........................................
Adjusts brightness of darker part of the picture. (0~ 15)Noise reduction ................ Switches noise reduction mode (OFF, L1, L2)Progressive ............................ Switches progressive mode (OFF, L1, L2, Film)
Reset............................................Resets the Image adjustment to previous levels.Store ............................................
Stores the Image adjustment values. Select an item [Image1 - Image4] from the pull-down menu and click Store button.Load .............................................
Loads the Image mode. Select an image mode from the pull-down menu and click Load button. There may not be available mode depending on the input mode as shown in the table left.
Image adjustment
This function is to adjust the projected picture image and save the image mode. To store
the adjusted value, click Store button, and to load the adjusted value, click Load button.
Input sourceImage mode Video Computer
Dynamic
4 4
Standard 4 4
Cinema 4 *
Real * 4Blackboard(Green) 4 4
Colorboard 4 4
Image1 - 4 4 4
✐ The mark "4" means that the available image mode in the selected input source. The error message appears when selecting the disabled image mode indicated with "*".
Control
Chapter 4 Controlling the Projector PC adjustment Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode ...... Displays a current mode like VGA, SVGA, XGA. SXGA, UXGA, WXGA, etc. or Mode1 - Mode5 which are the customized mode created by using the "Mode Store" function described below. Auto PC adj.......... Performs automatic adjustment. Fine sync. .............. Performs Fine Sync adjustment. (0 ~ 31) Total dots .............. Adjust the number of total dots in the horizontal period. Clamp .........................Adjusts the phase of the clamp. (1 ~ 127) Display area Horizontal ..........Adjusts the image area horizontally. Vertical ..............Adjusts the image area vertically.Position Horizontal ....... Adjusts the horizontal position of the screen. Vertical ..............Adjusts the vertical position of the screen. Reset......................... Resets the PC adjustments to the previous levels. Mode Store .......... Stores the PC adjustment values. Select a mode no. [Mode1 - Mode5] from the pull-down menu. Mode Free ............ Clear the PC adjustment values. Select a mode no. [Mode1 - Mode5] from the pull-down menu.
ENGLISH Setting up the projector Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting] or [Setting] and then set up each set- ting. Setting up the projector Item Description Screen ..................... Switches the screen mode. (Normal, True, Wide, Full, Custom) There may not be avail-able mode depending on the input mode as shown in the table below. Input sourceScreen mode Video Computer Normal 4 4 True * 4 Wide 4 4 Full * 4 Custom 4 4 ✐ The mark "4" means that the available screen mode in the selected input source system. The error message appears when selecting the disabled screen mode indi-cated with "*". Screen setting This function is to adjust the screen mode of the projector. The values in the text box rep- resent the current screen status.
0 Chapter 4 Controlling the Projector Item Description Ceiling ..................... Sets the image top/bottom and left/right reversed. (ON, OFF)Rear ........................... Sets the image left/right reversed. (ON, OFF) Power management ..... Sets into the selected power manage-ment mode (Ready, Shutdown, OFF) if the input signal is interrupted and no control key is pressed for the specified period of time. * The specified time can be set 1 to 30 min.On start .................. Sets the power-on mode when the AC cord is connected to the outlet. Lamp control ...... Selects lamp control mode. (Normal, Eco) Lamp life control .................... Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds the recommended total hours of use. Item Description Language .............. Sets the language display of projector's on-screen display menu. Auto setup ........... Executes the Auto PC Adj, and Input Search function below according to the each setting after clicking Start button. Auto PC Adj. ..... Sets Auto PC Adjustment mode. (ON, OFF) Input search ..... Sets the auto-input signal detection mode. (ON1, ON2, OFF) Auto keystone .... Sets Auto Keystone mode. (Auto, Manual, OFF)Background ......... Sets the screen background when no signal input. (Blue, User, Black)Display .................... Switches on or off the on-screen menu display on the screen. (OFF, Countdown Off, ON) Countdown off .......Displays image during the starting up.Logo ......................... Sets on or off the logo display on the screen during the startup. (OFF, Default, User) Setting 1 Setting 2