Sanyo Plc Xp100l Projector User Manual

51

Lamp control
Filter control
Choose the running speed of cooling fans from the following 
options.
 Normal   .......   Operate in this mode under normal conditions.
 
Max   ...........   Use this mode when you want to increase the 
cooling effect when operating the projector in high 
ambient temperature environment. Fan noise is 
lounder than “Normal”. 
Fan control
Remote control
Remote control
When pressing the SELECT button at Remote control, the Remote control code menu appears.
RC sensor
Select a...

5

On start
When this function is set to “On,” the projector will be 
automatically turned on just by connecting the AC power cord to 
the wall outlet.
✔Note:
	 •	 Be 	 sure 	 to 	 turn 	 off 	 the 	 projector 	 properly 	 (see 	 “Turning 	 Off 	 the 	
Projector” 	 on 	 page 	 24). 	 If 	 the 	 projector 	 is 	 turned 	 off 	 in 	 the 	 incorrect 	
sequence, 	 the 	 On 	 start 	 function 	 does 	 not 	 work 	 properly.
Power management
Time left before the lamp is off
Press the SELECT button at...

5

Security
Key lock
Key lock
Security
Select Key lock and this box appears. Choose one of the alternatives with the Point ed buttons and select [Yes] to activate it.
This function locks the side control and remote control buttons to 
prevent operation by unauthorized persons.
. . . . .   Unlocked.
. . . . .  Lock the side control buttons.
  To unlock, use the remote control.
. . . . .  Lock the remote control buttons.  
To unlock, use the side control.
If the side control accidentally becomes...

54

Change the PIN  Code 
Change the PIN code
CAUTION
:
WHEN
 y
OU
 
HAVE
 
CHANGED
 THE PI
N
 
CODE
, 
WRITE
 
DOWN
 
A 
NEW
 
PIN
 
CODE
 
IN
 
COLUMN
 
OF
 
THE
 
PIN
 
CODE
 
NO .
 
MEMO
 
ON
 
PAGE
 76, 
AND
 
KEEP
 
IT
 
SECUREL
y
 .
 I
F
 y
OU
 
FORGET
 y
OUR
 
PIN
 
CODE
, 
THE
 
PRO
j
ECTOR
 
CAN
 
NO
 
LONGER
 
BE
 
STARTED .
The PIN code can be changed to your desired four-digit number. 
Press the Point d buttons to select “PIN code change” and press 
the SELECT button. The New PIN   code...

55

Factory default
This function returns all setting values except for the user logo, PIN 
code lock, Logo PIN code lock, lamp counter, and filter counter to 
the factory default settings.
Factory default
Quit
Exit the Setting Menu.
Select Factory default and this box appears. Select [Yes], and the next box appears. 
Test pattern
Various test pattern are available for use when setting up the 
projector.
Filter counterFilter counter
Filter replacement icon appears on the screen at a set time.
✔Note:	 •...

56

Filter Instructions
Filter prevents dust from accumulating on the optical elements inside the projector\
. Should the filter becomes 
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup 
and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to 
replace the filter easily. The projector monitors the condition of the filter at all time and replac\
es a filter with a 
new one...

57

Turn off the projector, and unplug the AC power cord 
from the AC outlet.
First, clean up the dust on the projector and around the 
air vents.
1
2
Press s on the filter cover to release the latch and open 
the filter cover.3
Put the new one back into the position and close 
the filter cover. Make sure that the filter cartridge is 
properly and fully inserted.
5
CAUTION
Make sure the filter cartridge is inserted in the 
projector. If the filter cartridge is not inserted, the 
projector cannot be...

58

Be sure to reset the Scroll counter after replacing the filter 
cartridge. 
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Setting Menu icon.
Use the Point ed buttons to move the red frame pointer to 
Filter counter and then press the SELECT button. A dialog 
box appears showing the Used time option and the Scrolls 
remaining option. Use the Point ed buttons to select  
Scroll(s) remaining.
1
2
Resetting the Scroll CounterScroll...

59

Turn off the projector and unplug the AC power cord. Let 
the projector cool for at least 45 minutes.
Loosen the screw and open the lamp cover. Pull out the 
lamp by using the built in handle.
1
3
Replace the lamp with a new one. Make sure that the 
lamp is properly and fully inserted. 4
Open the filter cover. (p.57)2
Connect the AC power cord to the projector and turn on 
the projector.
6
Follow these steps to replace the lamp.
Reset the Lamp counter (p.60)
5
✔Note:
	 •	 Be	 sure 	 to 	 insert...

60

ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering, give the following information to the 
dealer.
 ●  Model No .  of your projector   :   PLC-XP100L/ PLC-XP100BKL
 ●  Replacement Lamp Type No .  :   POA-LMP108
                (Service Parts No. 610 334 2788)
Resetting the Lamp Counter
Be  sure  to  reset  the  Lamp  counter  after  the  lamp  is  replaced.  When  the  Lamp  counter  is  reset,  the  LAMP 
REPLACE indicator stops lighting and the Lamp...