Sanyo Plc Xp100l Projector User Manual

1

Remote Control
INPUT buttons
Input 
Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the 
remote control. The input source appears on the screen as 
you press each button. Select the connected input source.
Remote Control Operation
Remote Control button operation
Side Control
INPUT button
Press the INPUT button on the side control. It switches to 
INPUT 1, INPUT 2, and INPUT 3 as you press the INPUT 
button. 
Before using the INPUT button on the side control, you 
must select a correct input...



Computer Input Source Selection
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
INPUT Menu icon.
Use the Point ed buttons to move the red arrow pointer 
to the desired input and then press the SELECT button. The 
Source Select Menu appears. 
1
2
Input 1
INPUT MENU
Use the Point ed buttons to select the desired source and 
then press the SELECT button.3
When your computer...



When the video input signal is connected to the Y-
Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
When the video input signal is connected to the 
VIDEO jack, select Video.
When the video input signal is connected to the S-
VIDEO jack, select S-Video.
When connecting to video equipment, select the type of 
Video source in the Source Select Menu. 
WHEN SELECTING INPUT   (AV TERMINALS )
WHEN SELECTING INPUT    (5 BNC INPUT  j ACKS )
When the video input signal is connected to the Y-...

4

Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, 
WXGA, or UXGA (refer to “Compatible Computer Specifications” on pages 71–72). If a com\
puter is selected 
as a signal source, this projector automatically detects the signal format and tunes to project a proper image 
without any additional settings. (Some computers need to be set manually.) 
One of the following messages may appear when:
The projector cannot...

5

Auto PC Adjustment
Auto  PC  Adjustment  function  is  provided  to  automatically  adjust  Fine  sync, Total  dots,  Horizontal  and  Vertical  
positions to conform to your computer. 
Press  the  MENU  button  to  display  the  On-Screen  Menu.  Use 
the  Point 7  8  buttons  to  move  the  red  frame  pointer  to  the 
PC Adjust Menu icon.
1
2Use  the  Point ed  buttons  to  move  the  red  frame  pointer 
to  the  AUTO  PC  adj.  icon  and  then  press  the  SELECT  button 
twice. PC AD j...

6

Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. 
Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. 
The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to 
recall the setting for a specific computer. 
✔Note:     The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is...

7

Exit the PC Adjust Menu.
To store the adjusted data, select Store and then press the SELECT 
button. Move the red arrow pointer to one of the Mode 1 to 10 in 
which you want to store, and then press the SELECT button.
To reset the adjusted data, select Reset and press the SELECT 
button. A confirmation box appears and then select [Yes]. All 
adjustments will return to their previous figures.
To store the adjusted data  .To clear the adjusted data  .
To clear the adjusted data, select Mode free...

8

Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Image Select Menu icon.
1
2Use the Point ed buttons to move the red frame pointer to 
the desired image level and then press the SELECT button.
IMAGE SELECT MENU
Normal picture level preset on the projector.
Standard
Picture level with improved halftone for graphics.
Real
User preset picture adjustment in the Image Adjust Menu. (p. 47)
IMAGE 1–10
Image Level Selection
Menu...

9

Screen Size Adjustment
Select the desired screen size that conforms to the input signal source.
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Screen Menu icon.
1
Use the Point ed buttons to move the red frame pointer to 
the desired function and then press the SELECT button.2
Normal
SCREEN MENU
Provide the image at the normal computer aspect ratio of 4:3.
Wide
True
Provide the image in its original size. When the original...

40

Select Digital zoom +. The On-Screen Menu disappears and “D. 
zoom +” appears. Press the SELECT button to expand the image 
size. Use the Point ed7 8 buttons to pan the image. The Panning 
function can work only when the image is larger than the screen 
size.
You can also enter the Digital zoom + mode by pressing the 
D.ZOOM button on the remote control.
Digital zoom +
Select Digital zoom –. The On-Screen Menu disappears and “D. 
Zoom –” appears. Press the SELECT button to compress the image 
size....