Sanyo Plc Xp100l Projector User Manual

41

AV Sy STEM MENU (VIDEO OR S-VIDEO)
AV S y STEM MENU (COMPONENT VIDEO)
Video System Selection
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
AV System Menu icon.
Use the Point ed buttons to move the red arrow pointer to 
the desired system and then press the SELECT button.
1
2
If the projector cannot reproduce proper video image, select a 
specific broadcast signal format from among PAL, SECAM, NTSC, 
NTSC 4.43, PAL-M, and PAL-N....

4

Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Image Select Menu icon.
1
2Use the Point ed buttons to move the red frame pointer to 
the desired image level and then press the SELECT button.
IMAGE SELECT MENU
Image Level Selection
Move the red frame pointer to the desired level and press the SELECT button.
Image Select Menu icon
Normal picture level preset on the projector.
Standard
Picture level adjusted with fine tone....

4

Screen Size Adjustment
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Screen Menu icon.
Use the Point ed buttons to move the red frame pointer to 
the desired function and then press the SELECT button.
1
2
✔Note:
	 •	 Wide 	 cannot 	 be 	 operated 	 when 	 “720p,” 	 “1035i,” 	
or 	 “1080i” 	 is 	 selected 	 on 	 AV 	 System 	 Menu 	 (p.41).
SCREEN MENU
Provide the image at the wide screen ratio of 16:9.
Wide
Provide the image...

44

Keystone
This function is used to store or reset the keystone correction 
when the AC power cord is unplugged. Use the Point 7 8 buttons 
to switch between each option. 
 Store
. . .   Keep the keystone correction even when the AC power 
cord is unplugged.
 
Reset
  . .   Release the keystone correction when the AC power 
cord is unplugged.
To correct keystone distortion, press the Select button. The 
Keystone dialog box appears. Use the Point ed7 8 buttons to 
correct keystone distortion. (p.29)...

45

Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Image Adjust Menu icon.
1
2Use the Point ed buttons to move the red frame pointer to 
the desired item and then press the SELECT button to display 
the adjustment dialog box. Use the Point 7 8 buttons to 
adjust the setting value.IMAGE AD j UST MENU
Press the Point 7 button to decrease contrast; press the Point 8 
button to increase the contrast (from 0 to 63).
Press the Point 7...

46

Auto picture control
Use the Point 7 8 buttons to select the desired Auto picture 
control position (Off, L1 or L2).
 Off
  . . . .   Auto picture control OFF position.
 
L1
. . . . .   Auto picture control LEVEL 1 position.
 
L2
. . . . .   Auto picture control LEVEL 2 position.
Clear the check mark if you do not want to apply the adjusted 
color data; select the check mark and then press the SELECT 
button. The check mark disappears.
Return to the COLOR MANAGEMENT POINTER. (If you press 
the MENU...

47

Use the Point 7 8 buttons to adjust the gamma value to obtain a 
better balance of contrast (from 0 to 15).
Gamma
Press the Point 7 button to decrease the sharpness of the image; 
press the Point 8 button to increase the sharpness of the image 
(from 0 to 31).
Sharpness
An interlaced video signal can be displayed in progressive mode. 
Press the Point 7 8 buttons to change the progressive scan mode. 
 
Off
  . . . .   Progressive scan mode is “Off.”
 
On
  . . . .   Progressive scan mode is “On.”...

48

Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Setting Menu icon.
1
2
Language
The language used in the On-Screen Menu is available in English, 
German, French, Italian, Spanish, Portuguese, Dutch, Swedish, 
Russian, Chinese, Korean, or Japanese.
Use the Point ed buttons to move the red frame pointer 
to the desired item and then press the SELECT button. The 
Setting dialog box appears.
Press the SELECT button at Language, then...

49

This function allows you to customize the screen logo with Logo 
select, Capture, and Logo PIN code lock functions.Logo
✔Note:
	 •	 Before	 capturing 	 an 	 image, 	 select 	“Standard”	in 	 the 	 Image 	
Select
	
Menu
	
to
	
capture
	
a
	
proper
	
image.
	
(pp.
	
38, 	 42)
	 •	 A
	
signal
	
from
	
a
	
computer
	
can
	
be
	
captured
	
up
	
to 	 XGA 	 (1024 	 X 	
768).
	 •	 Certain 	 signals 	 may 	 not 	 be 	 captured 	 properly.
	 •	 When
	 capturing 	 the 	 image 	 that 	 has 	 been 	 adjusted 	 by...

50

Change the Logo PIN code lock setting
After a correct Logo PIN code is entered, the following dialog box appears.
Use the Point 7 8 buttons to switch On/Off,
This function prevents an unauthorized person from changing the 
screen logo.
 Off
  . . . .   The screen logo can be changed freely from the Logo 
Menu.
 
On
  . . . .   The screen logo cannot be changed without a Logo 
PIN code.
If you want to change the Logo PIN code lock setting, press the 
SELECT button and the Logo PIN code dialog box...