Sanyo Pdg Det100l Projector User Manual

51
Setting
Picture in Picture
This function is used to project two videos simultaneously 
by placing a separate small sub screen within or next to the 
main screen.
Use the Point ed buttons to move the red frame pointer 
to Picture in Picture and then press the SELECT button to 
display a dialog box. You can also display the dialog box by 
pressing and holding the PIP button on the remote control 
for more than 3 seconds.
Use the Point 7 8 buttons to adjust the setting value.
  Picture in Picture
.......

52
Setting
Edge blending
This function allows multiple projector images to be seamlessly 
overlapped.
Use the Point ed buttons to move the red frame pointer to 
Edge blending and then press the SELECT button to display a 
dialog box. Use the Point ed7 8 buttons to adjust the setting 
value.
  Edge blending   . .  Set to ‘On‘ to activate the Edge blending 
function.
  Width . . .  ......   Adjust the width of correction.
            Right/Left:  Set the width. (from 0 to 700).
         Top/Bottom:  Set...

53
Setting
 Advanced 
  color matching   ..... 
Set to ‘On‘ to activate the ‘Advanced color 
matching’. When it is set to ‘Off‘, all items 
except for ’Test pattern’ are displayed in 
grayout and cannot be adjusted.
  Measured  . . . . . . . .  When using the color wheel set optimized 
for high brightness, the chromatic coordinate 
(X,Y) and the brightness (L) of Red, Green, 
Blue, Half white, and White are displayed 
(Fig.1). When using the color wheel set 
optimized for rich color reproduction, the...

54
This function allows you to customize the screen logo with Logo 
select, Capture, and Logo PIN code lock functions.
Logo
✔Note:
• Before capturing an image, select  “Standard” in the Image 
Select Menu to capture a proper image. (pp.39, 43)
•  A signal from a computer can be captured up to 1400 x 
1050 dots.
•Certain signals may not be captured properly.
•  When capturing the image that has been adjusted by the 
Keystone function, the adjusted data is automatically reset 
and the projector captures an...

55
Change the Logo PIN code lock setting
After a correct Logo PIN code is 
entered, the following dialog box 
appears.
Use the Point 7 8 buttons to switch On/Off,
This function prevents an unauthorized person from changing 
the screen logo.
  Off  . . . .   The screen logo can be changed freely from the 
Logo Menu.
  On  . . . .   The screen logo cannot be changed without a 
Logo PIN code.
If you want to change the Logo PIN code lock setting, press 
the SELECT button and the Logo PIN code dialog box...

56
Choose the running speed of cooling fans from the following 
options.
 Normal .......  Normal speed.
  Max ...........  Faster than the normal speed.
Fan control
Setting
Filter control
You can replace the filter with this function. Press the SELECT 
button at Filter control to display a confirmation box. To replace, 
press the SELECT button at “YES” and the electrically operated 
filter starts to scroll.
You can also replace the filter by using the remote control 
(p.31). 
✔Note:
•  
Filter...

57
Power management
Time left before the lamp is off
Press the SELECT button at Power 
management and the dialog box 
appears. Use the Point 7 8 buttons 
to choose one of the three options.
Press the Point d button to select 
the timer, and then use the Point 7 
8 buttons to set the timer.
For reducing power consumption as well as maintaining 
the lamp life, the Power management function turns off the 
projection lamp when the projector is not used for a certain 
period.
If the input signal is...

58
Security
Key lockKey lock
Security
Select Key lock and 
this box appears. 
Choose one of the 
alternatives with the 
Point ed buttons 
and select [Yes] to 
activate it.
This function locks the side control and remote control buttons 
to prevent operation by unauthorized persons.. . . . .  Unlocked.
. . . . .   Lock the side control buttons.
  To unlock, use the remote control.
. . . . .   Lock the remote control buttons.  
To unlock, use the side control.
If the side control accidentally becomes...

59
Change the PIN Code 
Change the PIN code
CAUTION:
wHEN y OU HAVE CHANGED THE PIN CODE, wRITE 
DO wN A NEw PIN CODE IN COLUMN OF  THE PIN CODE 
NO .  MEMO ON PAGE 86,  AND KEEP IT SECUREL y . IF 
y OU FORGET y OUR PIN CODE,  THE PROjECTOR CAN NO 
LONGER BE STARTED . The PIN code can be changed to your desired four-digit 
number. Press the Point d buttons to select “PIN code 
change” and press the SELECT button. The New PIN code 
input dialog box appears. Set a new PIN code.
Change the PIN Code Lock...

60
Setting
Shutter
Shutter function is available to block out light to the 
screen, so that the screen can be used for the other 
presenters.Prohibits the shutter operation from the remote control 
and the projector's side control.
Remote control   . . .  Selecting "On" prohibits the shutter 
operation from the remote control.
Projector  . . . . . . . .   Selecting "On" prohibits the shutter 
operation from the side control.
It is possible to prohibit the shutter operation from both...