Sanyo Pdg Det100l Projector User Manual

41
Select Digital zoom +. The On-Screen Menu disappears and 
“D. zoom +” appears. Press the SELECT button to expand the 
image size. Use the Point ed7 8 buttons to pan the image. 
The Panning function can work only when the image is larger 
than the screen size.
You can also enter the Digital zoom + mode by pressing the 
D.ZOOM button on the remote control.Digital zoom +
Select Digital zoom –. The On-Screen Menu disappears and 
“D.zoom –” appears. Press the SELECT button to compress the 
image size. 
You...

42
AV SySTEM MENU (VIDEO OR S-VIDEO)
AV S ySTEM MENU (COMPONENT VIDEO)
Video System Selection
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the AV System Menu icon.
Use the Point ed buttons to move the red arrow pointer 
to the desired system and then press the SELECT button.1
2
If the projector cannot reproduce proper video image, select 
a specific broadcast signal format from among PAL, SECAM, 
NTSC, NTSC 4.43, PAL-M, and PAL-N....

43
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Image Select Menu icon.1
2
Use the Point ed buttons to move the red frame pointer 
to the desired image level and then press the SELECT 
button.
IMAGE SELECT MENU
Image Level Selection
Move the red frame pointer to the desired 
level and press the SELECT button.Image Select Menu icon
Normal picture level preset on the projector.
Standard
Picture level adjusted with fine tone. Cinema...

44
Screen Size Adjustment
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Screen Menu icon.
Use the Point ed buttons to move the red frame pointer 
to the desired function and then press the SELECT 
button.1
2SCREEN MENU
Provide the image at the normal video aspect ratio of 4:3. Normal
Move the red frame pointer to the desired 
function and press the SELECT button. Screen Menu icon
✔Note:
• 
When no signal is detected, “Normal” is 
set...

45
Keystone
This function is used to store or reset the keystone correction 
when the Main On/Off Switch is pressed to Off or the AC 
power cord is unplugged. Use the Point 7 8 buttons to switch 
between each option. 
  Store . . .  Keep the keystone correction even when the Main 
On/Off Switch is pressed to Off or the AC power 
cord is unplugged.
  Reset  . .   Release the keystone correction when the Main On/
Off Switch is pressed to Off or the AC power cord is 
unplugged.
To correct keystone...

46
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Image Adjust Menu icon.1
2
Use the Point ed buttons to move the red frame pointer 
to the desired item and then press the SELECT button 
to display the adjustment dialog box. Use the Point 7 8 
buttons to adjust the setting value.IMAGE AD
jUST MENU
Press the Point 7 button to decrease contrast; press the Point 
8 button to increase the contrast (from 0 to 63).
Press the Point 7 button...

47
Auto picture control
Use the Point 7 8 buttons to select the desired Auto picture 
control position (Off, L1 or L2).
  Off  . . . .   Auto picture control OFF position.
  L1 . . . . .   Auto picture control LEVEL 1 position.
  L2 . . . . .   Auto picture control LEVEL 2 position.
Clear the check mark if you do not want to apply the 
adjusted color data; select the check mark and then press 
the SELECT button. The check mark disappears. Return to the COLOR MANAGEMENT POINTER. (If you 
press the MENU...

48
Use the Point 7 8 buttons to adjust the gamma value to obtain a 
better balance of contrast (from 0 to 15).Gamma
Press the Point 7 button to decrease the sharpness of the image; 
press the Point 8 button to increase the sharpness of the image 
(from 0 to 31).
Sharpness
An interlaced video signal can be displayed in progressive mode. 
Press the Point 7 8 buttons to change the progressive scan mode. 
  Off  . . . .   Progressive scan mode is “Off.”
  On  . . . .   Progressive scan mode is “On.”
  Film...

49
Picture Image
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in 
English, German, French, Italian, Spanish, Portuguese, Dutch, 
Swedish, Russian, Chinese, Korean, or Japanese. Use the Point ed buttons to move the red frame pointer 
to the desired item and then press the 
SELECT button. 
The Setting dialog box appears.
Press the SELECT button at...

50
Background
The selected background screen will be displayed when no 
input signal is detected.
  Blue  . . .   Blue colored background.
  User  . . .   The image you captured.
  Black . . .  Black colored background.
Setting
Lamp control
This function allows you to change brightness of the screen.
2-Lamps. .   Two lamps turn on.
Lamp1
  . . .    Only Lamp1 turns on.
Lamp2
  . . .    Only Lamp2 turns on.
This projector is equipped with 2 projection lamps and the 
number of using lamps can be switched...