Samsung LN-S4096D, LN-S4696D, LN-S5296D TFT-LCD TELEVISION Owners Instructions

							English-49
Changing the Location of the Sub (PIP) Picture
1
Press the MENUbutton. Press the  or  button to select “PIP”, then 
press the 
ENTERbutton.
2
Press the  or  button to select “Position”, then press the ENTERbutton. 
Press the  or  button to select a position you want, then press the 
ENTERbutton.
Select “Return” by pressing the  or  button, then press the 
ENTERbutton to return to the previous menu.
Press the 
EXITbutton to exit.
de.
PIP Settings
O : PIP operates
X : PIP doesn’t operate
Main
Picture
Sub
PictureAnalog
Analog
Digital
(ATSC, CATV)
AV/Component/
HDMI/PCDigital
(ATSC, CATV)AV 1
X
X
XX
X
XO O
XO
O
XO
O
XO
O
XO
x
XO
X
XX
X
X O
O
X
AV 2
S-Video
O
O
X
Component1HDMI2WISELINK/
D-Net PCComponent2HDMI1
Changing the Size of the Sub (PIP) Picture
1
Press the MENUbutton. Press the  or  button to select “PIP”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Size”, then press the ENTERbutton.
Press the  or  button to select a size you want, then press the 
ENTER
button.
Select “Return” by pressing the  or  button, then press the 
ENTER
button to return to the previous menu.
Press the 
EXITbutton to exit.
Double (       ,       ) mode is not available in PC mode.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 49 
						

							English-50
Changing the Channel of the Sub (PIP) Picture
After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels.
1
Press the MENUbutton. Press the  or  button to select “PIP”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Channel”, then press the 
ENTERbutton.
Alternate method
Press the CH or CH button under the cover of the remote control to change 
the sub picture channels while PIP is on.
3
Press the  or  button to select a channel you want, then press the 
ENTERbutton.
Select “Return” by pressing the  or  button, then press the 
ENTER
button to return to the previous menu. 
Press the 
EXITbutton to exit.
• Air : “Air” antenna signal
Cable : “Cable” antenna signal
Selecting a Signal Source (Air or Cable) for PIP
If the PIP source is TV while PIP is On, you can select a different broadcasting source for the PIP picture from the main picture.
1
Press the MENUbutton. Press the  or  button to select “PIP”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Air/Cable”, then press the 
ENTERbutton.
3
Press the  or  button to select “Air” or “Cable”, then press the 
ENTERbutton.
Select “Return” by pressing the  or  button, then press the 
ENTERbutton to return to the previous menu.
Press the 
EXITbutton to exit.
• Air : “Air” antenna signal
Cable : “Cable” antenna signal
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 50 
						

							English-51
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces  the noisy picture background. 
If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”.
1
Press the MENUbutton. Press the  or  button to select “Setup”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Blue Screen”, then press the
ENTERbutton.
3
Press the  or  button to select “On” or “Off”, then press the 
ENTERbutton.
Select “Return” by pressing the  or  button, then press the 
ENTER
button to return to the previous menu.
Press the 
EXITbutton to exit.
Freezing the Picture
Press the STILLbutton to freeze a moving picture. (Normal sound will still be heard.) 
To cancel this function, press the 
STILLbutton again or press any button on the remote control.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 51 
						

							English-52
Sound Control
You can control and customize the sound levels and settings of the TV with the remote control.
1
Press the MENUbutton. Press the  or  button to select “Sound”, 
then press the 
ENTERbutton. 
Adjusting the Volume
Press the VOL+ or VOL– button to increase or decrease the volume.
Using Automatic Sound Settings
Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) that are preset at the factory. 
You can select “Custom”, which automatically recalls your personalized sound settings.
• Choose “Standard” for the standard factory settings.
• Choose “Music” when watching music videos or concerts.
• Choose “Movie” when watching movies.
• Choose “Speech” when watching a show that is mostly dialog 
(i.e., news).
• Choose “Custom” to recall your personalized settings 
(see “Customizing the Sound”, page 53).
Using the MUTE Button
At any time, you can temporarily cut off the sound.
Press the 
MUTEbutton on the remote control. 
The message “Mute” is displayed and the sound 
cuts off. To turn mute off, press the 
MUTEbutton 
again or press either the VOL+ or VOL– button.
Sound Control
2
Press the  or  button to select “Mode”, then press the ENTERbutton. 
Press the  or  button again to select “Mode”, then press the 
ENTERbutton.
Press the  or  button to select a particular item (Standard, Music, Movie,
Speech, Custom), then press the 
ENTERbutton.
Select “Return” by pressing the  or  button, then press the 
ENTERbutton to return to the previous menu. 
Press the 
EXITbutton to exit.
The VOL+, VOL– and MUTEbuttons do not  operate when the Internal Mute is set to on.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 52 
						

							English-53
1
Press the MENUbutton. Press the  or  button to select “Sound”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Mode”, then press the ENTERbutton. 
Press the  or  button again to select “Mode”, then press the 
ENTERbutton. Press the  or  button to select a particular item
(Standard, Music, Movie, Speech, Custom), then press the 
ENTERbutton.
4
To return the factory defaults, select “Reset” by pressing the  or  button. 
Press the 
ENTERbutton.
Press the  or  button to select “OK” or “Cancel”, then press the 
ENTERbutton.
Select “Return” by pressing the  or  button, then press the 
ENTERbutton to return to the previous menu.
Press the 
EXIT button to exit.
3
Press the  button. Press the  or  button to select a particular item 
(Balance, 100Hz, 300Hz, 1kHz, 3kHz, 10kHz) to be changed, then 
press the 
ENTERbutton.
Press the  or  button to increase or decrease the selected frequency. 
Press the 
ENTERbutton.
•The equalizer function is set for each mode (Standard, Music, Movie,  
Speech, or Custom).
L/R Sound Balance Adjustment To adjust the sound balance of the L/R speakers.
Bandwidth Adjustment (100Hz, 300Hz, 1kHz, 3kHz, 10kHz)To adjust the level of different bandwidth frequencies.
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
Alternate method
Press the S.MODEbutton on the remote control 
repeatedly to select one of the sound settings.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 53 
						

							English-54
Setting the SRS TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. 
Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, 
including internal television speakers. It is fully compatible with all multichannel formats.
1
Press the MENUbutton. Press the  or  button to select “Sound”, 
then press the 
ENTERbutton. 
2
Press the  or  button to select “SRS TruSurround XT”, then press
the 
ENTERbutton.
3
Press the  or  button to select “Off” or “On”, then press the ENTER
button.
Select “Return” by pressing the  or  button, then press the 
ENTERbutton to return to the previous menu.
Press the 
EXITbutton to exit.
Alternate method
Press the SRSbutton on the remote control 
repeatedly to select “Off” or “On”.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 54 
						

							English-55
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed.
“Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation signal is low.
1
Press the MENUbutton. Press the  or  button to select “Sound”, 
then press the 
ENTERbutton. 
2
Press the  or  button to select “Auto Volume”, then press the 
ENTERbutton.
3
Press the  or  button to select “Off” or “On”, then press the 
ENTERbutton.
Select “Return” by pressing the  or  button, then press the 
ENTERbutton to return to the previous menu.
Press the 
EXITbutton to exit.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 55 
						

							English-56
Choosing a Multi-Channel Sound (MTS) track
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous
translations of the program into foreign languages).
The availability of these additional “multitracks” depends upon the program.
1
Press the MENUbutton. Press the  or  button to select “Sound”, 
then press the 
ENTERbutton. 
2
Press the  or  button to select “Multi-Track Options”, then press the 
ENTERbutton.
3
Press the  or  button to select “Preferred Language”, then press the
ENTERbutton.
Press the  or  button to choose the language (English, Spanish or
French) you want, then press the 
ENTERbutton. 
Select “Return” by pressing the  or  button, then press the 
ENTER
button to return to the previous menu. 
Press the 
EXITbutton to exit.
Digital
Alternate method
Press the MTSbutton on the remote control. 
You can listen in a language other than the 
favorite language by pressing the 
MTSbutton.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 56 
						

							English-57
Choosing a Multi-Channel Sound (MTS) track
Depending on the particular program being broadcast, you can listen to Stereo, SAP or Mono.
1
Press the MENUbutton. Press the  or  button to select “Sound”, 
then press the 
ENTERbutton. 
2
Press the  or  button to select “Multi-Track Options”, then press the 
ENTERbutton.
3
Press the  or  button to select “Multi-Track Sound”, then press the 
ENTERbutton.
Press the  or  button to select a setting you want, then press the 
ENTERbutton. 
Select “Return” by pressing the  or  button, then press the 
ENTERbutton to return to the previous menu. 
Press the 
EXITbutton to exit.
Analog
Alternate method
Press the MTSbutton on the remote control 
repeatedly to select Stereo, SAP or Mono.
Choose “Stereo” for channels that are broadcasting in stereo.
Choose “SAP” to listen to the Separate Audio Program, which is usually a foreign-language 
translation.
Choose “Mono” for channels that are broadcasting in mono, or if you are having difficulty 
receivind a stereo signal.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 57 
						

							English-58
Selecting the Internal Mute
When using a device such as a Home Theater or Amplifier with external speakers, you can set Internal Mute to On to cut 
off sound from the TV's internal speakers.
1
Press the MENUbutton. Press the  or  button to select “Sound”, 
then press the 
ENTERbutton. 
2
Press the  or  button to select “Internal Mute”, then press the 
ENTERbutton.
3
Press the  or  button to select “On”, then press the ENTER
button. Pressing the  or  button will alternate between “On” 
and “Off”. 
Select “Return” by pressing the  or  button, then press the 
ENTER
button to return to the previous menu. 
Press the 
EXITbutton to exit.
The VOL +, VOL - and Mute buttons do not operate when the Internal MUTE is set to On.
When Internal Mute is on, only the “Multi-Track Options” menu is available in the Sound menu.
To watch TV with an external speaker system such as a home theater system, 
set Internal Mute to On. To watch TV with the internal speaker or to record video with a 
VCR through AV OUT of the TV, set Internal Mute to Off. 
See table on page 14. 
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 58