Samsung LN-S4096D, LN-S4696D, LN-S5296D TFT-LCD TELEVISION Owners Instructions

							English-29
1
Press the MENUbutton. Press the  or  button to select “Setup”,
then press the 
ENTERbutton.
2
Press the  or  button to select “Clock”, then press the 
ENTERbutton.
The Clock can be set automatically if you are receiving a digital signal.
4
Press the  or  button to select “Time Zone”, then press the 
ENTERbutton.
Press the  or  button to highlight the time zone for your local area
(and to move the highlight to the appropriate time zone on the map of the
United States), then press the 
ENTERbutton.
5
Press the or button to select “DST”(Daylight Saving Time), then 
press the 
ENTERbutton.
Press the 
or button to select “On” or “Off”, then press the 
ENTERbutton.
Select “Return” by pressing the 
or button, then press the 
ENTERbutton to return to the previous menu. 
Press the 
EXITbutton to exit.
3
Press the  or  button to select “Clock Mode”, then press the ENTER
button. Press the  or  button to select “Auto”, then press the ENTER
button.
Option 2: Setting the Clock Automatically
•When you set up Auto Time, the set time may not be correct depending 
on the broadcasting station and signal. If there is a difference between 
the real time and set time, please set the time manually.
BN68-01047X-00Eng.qxd  8/29/06  2:00 PM  Page 29 
						

							English-30
Setting the On/Off Timer
1
Press the MENUbutton. Press the  or  button to select “Setup”, then 
press the 
ENTERbutton.
2
Press the  or  button to select “Timer”, then press the ENTERbutton.
Press the  or  button to select “On Timer”, then press the 
ENTERbutton.
Press the  or  button to adjust “Hour/Min”, then press the  button to
move to the next step.                       
Set other items using the same method as above. 
To activate On Timer with the setting entered, set Activation to “Off,  
Mon~Fri, Daily or Once” by pressing  or  button. 
Press the 
ENTERbutton.    
3
Press the  or  button to select “Off Timer”, then press the ENTER
button. Press the  or  button to adjust “Hour/Min”, then press the 
button to move to the next step. Set other items using the same method 
as above. 
To activate Off Timer with the setting entered, set Activation to “Off, 
Mon~Sat, Mon~Fri, Daily or Once”  by pressing  or  button. 
Press the 
ENTERbutton.              
When finished, select “Return” by pressing  or  button and 
ENTERbutton to return to the previous menu.
Press theEXITbutton to exit.
• You can set the hour, minute, and channel directly by pressing the number 
buttons on the remote control.
Auto Power OffWhen you set the timer “On”, the television will eventually turn off, if no controls are operated for 
3 hours after the TV was turned on by the timer.
This function is only available in timer “On” mode and prevents overheating or leakage, which 
may occur if a TV is on for too long time. (when you are on vacation, for example.)
• You can set the hour, minute, and channel directly by pressing the number 
buttons on the remote control.
BN68-01047X-00Eng.qxd  8/29/06  2:00 PM  Page 30 
						

							English-31
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
1
Press the MENUbutton. Press the  or  button to select “Setup”, then
press the  
ENTERbutton.
2
Press the  or  button to select “Timer”, then press the 
ENTERbutton.
Press the  or  button to select  “Sleep Timer”, then press the
ENTERbutton. 
3
Press the  or  button to set sleep timer to “30min, 60min, 90min,
120min, 150min, 180min or Off”, then press the 
ENTERbutton. 
Select “Return” by pressing the  or  button, then press the 
ENTERbutton to return to the previous menu.
Press the 
EXITbutton to exit.
Setting the Sleep Timer
Alternate method
Press the SLEEPbutton on the remote control repeatedly 
until the appropriate interval appears (any of the preset 
values from “off” to “180 min”.)
BN68-01047X-00Eng.qxd  8/29/06  2:00 PM  Page 31 
						

							English-32
Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the 
TV source (broadcast or cable).
Viewing an External Signal Source
1
Press the MENUbutton. 
Press the 
ENTERbutton to select “Input”.
2
Press the  or  button to select “Source List”, then press the
ENTERbutton.
Press the  or  button to select a signal source, then press the
ENTERbutton.
•When you connect equipment to the TV, you can choose between the 
following sets of jacks: “AV1”, “S-Video”, “Component1”, “Component2”, 
“PC”, “HDMI1/DVI1”, or “HDMI2/DVI2” on the TV’s rear panel, and "AV2" 
on the TV's side panel.
Alternate method Setting the Signal Source
Press the SOURCEbutton on the remote control 
repeatedly to select an external signal source.
Only connected devices can be selected.
Before selecting an input source, make sure the corresponding external device is connected first.
HDMI input can be selected only when the external device is turned on and connected to the TV.
BN68-01047X-00Eng.qxd  8/29/06  2:00 PM  Page 32 
						

							
Englis\b-33
T\bis \feature enables you to name t\be input source you \bave connected.

Assigning N\bmes t\f Extern\bl Input M\fde

1
Press t\be 
MENU
butto\f. Press t\be 
ENTER
butto\f to select “I\fput”.

2
Press t\be  or  butto\f to select “Edit Name”, t\be\f press t\be 
ENTER

butto\f.

3
Press t\be  or  butto\f to select a sig\fal source to edit, t\be\f presst\be 

ENTER
butto\f.

4
Press t\be  or  butto\f to select t\be exter\fal device : VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB, PVR STB, AV Receiver, 
DVD  Receiver, Game, Camcorder, DVD Combo, DVD HDD Recorder, PC,
I\fter\fet TV Recv., I\fteractiv e TV Recv., VOD (Video O\f Dema\fd) STB, TV.
Press t\be 

ENTER
butto\f. 
Set ot\ber sig\fal sources (AV1, AV2, S-Video, Compo\fe\ft1, Compo\fe\ft2,
PC, HDMI1/DVI1, HDMI2/DVI2) usi\fg t\be same met\bod as listed above. 
Select “Retur\f” by pressi\fg t\be  or  butto\f, t\be\f press t\be 

ENTER
butto\f to retur\f to t\be previous me\fu. 
Press t\be 

E\bIT
butto\f to exit.

BN68-01047X-00Eng.qxd  8/30/06  10:57  Page 33 
						

							English-34
Selecting Your Favorite Channels
You can store your favorite channels for each available input source (such as TV and CATV).
Preset : To use the Channel Manager function, first run Auto Program (see page 20).
Channel Control
1
Press the MENUbutton. Press the  or  button to select “Channel”,
then press the 
ENTERbutton.
2
Press the  or  button to select “Channel Manager”, then press the 
ENTERbutton. Press the  or  button to select “All”, then 
press the 
ENTERbutton.  
3
Press the  / / / buttons to select a channel, 
then press the 
ENTERbutton and option window
will appear. 
Press the  or  button to select “Favorite”, the press the
ENTERbutton and a mark, designating the channel 
as a Favorite Channel will appear. Press the 
ENTER
button again to deselect  the selected channel and the
mark will disappear.
• Red button (List Mode) : If you press the Red  button 
repeatedly, the All Channel List, the Added Channel 
List or the Favorite Channel List is selected 
sequentially.
To Store Your Favorite Channels:
Only memorized channels can be set as Favorite channels.
Select “Return” by pressing the  or  button, then 
press the 
ENTERbutton to return to the previous 
menu. Press the 
EXITbutton to exit.
Alternate method
Select Channel menu ➔Channel Manager ➔Favorite
Press the 
FAV.CHbutton repeatedly to jump from one
favorite channel to another.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 34 
						

							English-35
You can display a list of all channels, added channels, or your favorite channels.
Preset : To use the Channel Manager function, first run Auto Program (see page 20).
Viewing the Channel Lists
1
Press the MENUbutton. Press the  or  button to select “Channel”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Channel Manager”, then press the
ENTERbutton. Press the  or  button to select “All”, then press the
ENTERbutton.  
3
If you want to watch the channel, press the  / / /
buttons to select a channel, then press the 
ENTER
button and the option window will appear.
4
Press the ENTERbutton to select “Watch”, then press the
ENTERbutton again.
The selected channel broadcasting window will appear.
Alternate method
Press the CH MGRbutton on the remote 
control to display a list of channels.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 35 
						

							English-36
Adding and Erasing Channels
Preset : To use the Channel Manager function, first run Auto Program (See page 20).
1
Press the MENUbutton. Press the  or  button to select “Channel”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Channel Manager”, then press the 
ENTERbutton. Press the  or  button to select “Added” then press the 
ENTERbutton.  
3
Press the  / / / buttons to select a channel, then 
press the 
ENTERbutton and option window will appear. 
Press the  or  button to select “Add”, then press the 
ENTERbutton; the mark  will appear and the channel 
will be added. 
To deselect the selected channel, press the  or  button 
to select “Delete”, then press the 
ENTERbutton. 
The mark will disappear.
• Red button (List Mode) : If you press the Red button 
repeatedly, the All Channel List, the Added Channel 
List or the Favorite Channel List is selected  sequentially.
• Green button (Add All) : Press to add all channels 
of the channel list.
• Yellow button (Delete All) : Press to delete all channels 
of the channel list.
Select “Return” by pressing the  or  button, then press 
the 
ENTERbutton to return to the previous menu. 
Press the 
EXITbutton to exit.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 36 
						

							English-37
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists
of five fields, where each field is a letter, a number or a blank. When the INFObutton is pressed, the channel label will appear.
1
Press the MENUbutton. Press the  or  button to select “Channel”,
then press the 
ENTERbutton.
2
Press the  or  button to select “Channel Manager”, then press the
ENTERbutton. Press the  or  button to select “All”, then press the
ENTERbutton.  
3
Press the  / / / button to select a channel, then
press the 
ENTERbutton and option 
window will appear. Press the  or  button to select
“Name”, then press the 
ENTERbutton.
4
Press the or  button to select a letter, a number or
a blank. (Results in this sequence: A...Z, 0...9, +, -, 
*, /,
blank).
If you add or delete a TV channel, the labeled channels will also be added 
or deleted.
5
Press the  or  button to switch to the next field, which
will be selected. Select a second letter or digit by pressing
or  button, as above. 
Repeat the process to select the last three digits. To erase
the assigned new name, press and hold the  or 
button until a blank appears.
When you have finished, press the 
MENUbutton.
Select “Return” by pressing the  or  button, then 
press the 
ENTERbutton to return to the previous menu.
Press the 
EXITbutton to exit.
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 37 
						

							English-38
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENUbutton. Press the  or  button to select “Channel”, then 
press the 
ENTERbutton.
2
Press the  or  button to select “Fine Tune”, then press the 
ENTERbutton. 
3
Press the  button. Press the  or  button to adjust the fine tuning.
To store the fine tuning setting in the TV’s memory, press the 
ENTERbutton. 
4
To reset the fine tuning setting, press the  button to select “Reset”, 
then press the 
ENTERbutton.
Select “Return” by pressing the  or  button, then press the 
ENTER
button return to the previous menu. Press the EXITbutton to exit.
Only analog TV channels can be fine tuned.
" *" will appear next to the name of fine-tuned channels.
Analog
BN68-01047X-00Eng.qxd  8/29/06  2:01 PM  Page 38