Samsung CLX 6250FX User Manual

							Getting started_ 6
a)Make sure that the machine is connected to your computer and 
powered on.
b) Wh
en the Administrator Login  window appears, type in “root” 
in the  Login field and enter t he system password.
You must log in as a super user  (root) 
 to uninstall the printer 
driver. If you are not a super user, ask your system 
administrator.
c)C
lick the icon at the bottom of the desktop. When the Terminal  screen appears, type in:
[root@localhost root]#cd  /opt/Samsung/mfp/u
 ninstall/
[root@localhost uninst a
 ll]#./uninstall.sh
d) Click  Un
install .
e) Click  Nex
 t. 
f) Cl
ick  Finish.
Sharing your machine locally
Follow the steps below to  set up the computers to share your machine 
locally.
If the Host computer is directly conne cte
 d to the machine with a USB cable 
and is also connected to the local ne twork environment, the client computer 
connected to the local network can use the shared machine through the 
host computer to print. 
 
1Host computer A computer which is directly connected to 
the 
machine by USB cable.
 
2Client computers Computers which use the machine shared 
th
rough the host computer. 
Windows
Setting up a host computer
1.Install your printer driver (See  Installing USB connected machine’s 
driver on page  3 , Installing network connected machine’s driver on 
page  3 ).
2. Click th
e Windows Start  menu. 
3. For Wi
ndows 2000, select Settings  > Printers.
• F
or Windows XP/2003, select Printers and Faxes . 
• For Windows 2008/Vista, select  Control Panel > H
 ardware and 
Sound  > Printers . 
• For Windows 7, 
 select Control Panel  > Hardware and Sound  > 
Devices and Printers . 
• F
or Windows Server 2008 R2, select  Control Panel > Hardware > 
Devices and Printers . 
4. Righ
t click your printer icon. 
5.For 
Windows XP/2003/2008/Vista, press  Properties.
For Windows 7 and Windows Server 2008 R2, from context menus, 
select the  Printer p

roperties.
 If Printer properties  item has ► mark, you can  select other 
printer drivers connect ed with selected printer.
6. Select the  Sharing ta
 b. 7.
Check the  C
 hange Sharing Options .
8. Check the  Share this printer .
9. Fill
 in the Share Name  field. Click OK.
Setting up a client computer
1.Install your printer driver (See  Installing USB connected machine’s 
driver on page  3 ).
2. Click the Windows  St
 art menu. 
3. Select  All prog
 rams > Accessories  > Window Explorer .
4. En
ter in the IP address of the host computer and press Enter. 
 In case host computer requires  User name and Password , fill 
in User ID and password of the host computer account.
5. R
ight click the printer icon you want to share and select  Connect.
6. W
hen the set up complete message appears, click  OK. 
7. Open
 the file you want to  print and start printing. 
Macintosh
 The following steps are for Mac OS X 10.5~10.6. Refer to Mac Help 
for other OS versions. 
Setting up a host computer
1.Install your printer driver (See  Macintosh on page 4 , Macintosh on 
page  5 ).
2. Open
 the  Applications  folder > System Preferences  and click Print 
& Fax . 
3. Select the print
 er to share in the  Printer List. 
4. Select  Share this printer .
Setting up a client computer
1.Install your printer driver (See  Installing USB connected machine’s 
driver on page  3 ).
2. Open
 the  Applications  folder > System Preferences  and click Print 
& Fax . 
3. Press the “ +” icon. 
A display window showing the name of your shared printer appears.
4. Select your machine 
 and click Add. 
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup_ 1
1.network setup
This chapter gives you step-by-step  instructions for setting up the network connected machine and software.
This chapter includes:
•Network environment
• Introducing useful network programs
• Using a wired network •
Installing network connected machine’s driver
• IPv6 Configuration
  
Network environment
You need to set up the network protocols on the machine to use it as your 
network machine. You can set up the basic network settings through the 
machines control panel.
The following table shows the networ k en
 vironments supported by the 
machine:
ItemRequirements
Network interface •Ethe
rnet 10/100 Base-TX
•802.11
 b/g Wireless LAN (Optional)
Network operating system •Win
dows 
2000/XP/2003/2008/Vista/7/2008 
Server R2
• Variou
s Linux OS
•Ma
c OS X 10.3 ~ 10.6
•UNIX
Network protocols •TCP/
IPv4
•DHCP, BOOTP
• DNS, WINS, Bo
 njour, SLP, UPnP
• Stan
dard TCP/IP Printing (RAW), LPR, 
IPP, WSD
• SNMPv 1/2/3, HTT
 P (S), Telnet, SMTP 
(S), LDAP (S), IPSec
• SM
B, FTP, Kerberos
•TCP/IPv6
  (DHCP, DNS, RAW, LPR, 
SNMPv 1/2/3, HTTP (S), IPSec)
(See  IPv6 Configuration on page  6 .)
Wireless security 
(Op
 tional) •
Authentication: Open  System, Shared 
Key, WPA Personal,  WPA2 Personal 
(PSK)
• Encryp
tion: WEP64, WEP128, TKIP, 
AES
Introducing useful  network programs
There are several programs available to  setup the network settings easily in 
network environment. For the network administrator especially, managing 
several machines on the network is possible.
 Before using the programs belo w, set the IP address first.
SyncThru™ Web Service
Web server embedded on your network machine, which allows you to:
•C
onfigure the network parameters necessary for the machine to connect 
to various network environments.
• Custom
 ize machine settings.
(See  Using SyncThru™ Web Service on page  1 .)
SyncThru™ Web Admin Service
A web-based machine management solution for network administrators. 
SyncThru™ Web Admin Service provides you with an efficient way of 
managing network devices and lets you remotely monitor and troubleshoot 
network machines from any site with  co
 rporate internet access. Download 
this program from http://solution.samsungprinter.com.
SetIP
This utility program allows you to se lect a network interface and manually 
configure the IP addresses for us e with the TCP/IP protocol (See IPv4 
setting using SetIP Program (Windows) on page  2  ,  IPv4 setting using 
SetIP Program (Macintosh) on page  2  or  IPv4 setting using SetIP Program 
(Linux) on page  3 ).
 TCP/IPv6 is not supported by this program.
Using a wired network
You must set up the network protocol s on your machine to use it on your 
network. This chapter will show you how this is easily accomplished.
You can use network after connecting network cable to a corresponding 
po
 rt on your machine. 
Printing configuration report
You can print a  Network Configuration Report  from the machine’s control 
panel that will show the current machine’s network settings. This will help 
you to set up a network and troubleshoot problems.
1. Pres
s  Menu on the control panel.
2. Pre
ss the up/down arrow to highlight  System Setup and press OK.
3. Pre
ss the up/down arrow to highlight  Report and press  OK.
4. Pre
ss the up/down arrow to highlight  Network Info. and press OK.
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup_ 2
5.Press  OK when  Yes highlights to confirm printing. 
The  Ne
twork Configuration Report  prints.
Using this  Ne
 twork Configuration Report , you can find your machine MAC 
address and IP address.
For example:
• MAC
 Address : 00:15:99:41:A2:78
•IP Addre
 ss : 192.0.0.192
Setting IPv4 address
You must set up an IPv4 address for network printing and management. In 
most cases a new IP address will be automatically assigned by a DHCP 
(Dynamic Host Configuration Protoc ol) server located on the network.
 If you use IPv6 address, refer to IPv6 Configuration on page 6
In a few situations the IP address must be set manually. This is called a 
static IP and
  is often required in co rporate Intranets for security reasons.
• DHCP IP a
 ssignment: Connect your machine to the network, and wait a 
few minutes for the DHCP server to assign an IP address to the 
machine. Then, print the  Network Configuration Report  as explained 
above. If the report  shows that the IP address has changed, the 
assignment was successful. You will see the new IP address in the 
report.
• St
atic IP assignment : Use the SetIP program to  change the IP address 
from your computer. If your machine has a control panel, you can also 
change the IP address using the machines control panel.
In an office environment, we recommend that you contact a network 
a
 dministrator to set this address for you.
IPv4 setting using control panel
1. Connect your machine to the network with an network cable.
2. T
urn on the machine.
3.Pr
ess  Menu on the control panel.
4. Pre
ss the up/down arrow to highlight  Network and press  OK.
5. Pre
ss the up/down arrow to highlight  TCP/IP (IPv4) and press OK.
6. Pre
ss the up/down arrow to highlight  Static and press  OK.
7. Pre
ss the up/down arrow to highlight  IP Address and press OK.
8. Ente
r the IP address using numeric keypad and press  OK.
9. Enter 
other parameters, such as the  Subnet Mask and Gateway  and 
press  OK.
10. After enteri
 ng all parameters, press  Stop/Clear to return to ready 
mode.
Now go to  Installing network connected machine’s driver on page  3.
IPv4 setting using SetIP Program (Windows)
This program is for manually setting the network IP address of your 
machine using its MAC address to communicate with the machine. A 
MAC address is the hardware serial  number of the network interface and 
can be found in the  Network Configuration Report .
For using SetIP program, disable the  co
 mputer firewall before continuing 
by performing the following:
1. Ope
n  Control Panel .
2. Doub
le click  Security Center .
3. Click  Wi
ndows Firewall .
4. Disabl
e the firewall.
Installing the program
1.Insert the Printer Software CD-ROM provided with your machine. 
When the driver CD runs autom atically, close that window.
2. Start a w
eb browser such as Internet  Explorer and open the X drive. (X 
represents your CD-ROM drive.)
3. D
ouble-click  Application > SetIP.
4. D
ouble-click  Setup.exe to install this program.
5. Click  OK. If n
 ecessary, select a language from the drop-down list.
6. F
ollow the instructions in the window and complete the installation.
Starting the program
1.Connect your machine and the co mputer using network cable.
2. T
urn on the machine.
3.F
rom the Windows  Start menu, select  All Programs  > Samsung 
Printers  > SetIP  > SetIP.
4. Click on 
the  icon (third from left) in the SetIP window to open the 
TCP/IP configuration window.
5. En
ter the machine’s new information into the configuration window as 
follows:
•MAC Address : Find the machine’s MAC address on the  Network 
Configuration Report  and enter it without the colons. For 
example, 00:15:99:29:51 :A8 becomes 0015992951A8.
 A MAC address is a hardware serial number of the machine’s 
network interface and can be found in the  Network 
Configuration Report .
• IP Ad
dress : Enter a new IP address for your printer.
For example, if your computer’s IP address is 192.168.1.150, 
enter 192
 .168.1.X. (X is num ber between 1 and 254 other than 
the computer’s address.)
• Subnet Mask : 
 Enter a new Subnet Mask for your machine.
• Def
ault Gateway : Enter a new Gateway for your machine.
6. Click  Ap
ply , and then click  OK. The machine will automatically print 
the  Network Configuration Report . Confirm that all of the settings 
are correct.
7. Click  Exit to
  close the SetIP program.
8. If necessary, restart th e
  computer’s firewall.
IPv4 setting using SetIP Program (Macintosh)
For using SetIP program, disable the computer firewall before continuing 
by performing the following:
 The path and UIs may differ by Ma c OS version. Refer to the Mac 
OS manul to turn firewall off.
1. Open
  System Preferences .
2. Click  Security .
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup_ 3
3.Click the  Firewall menu.
4. Turn
 the firewall off.
 The following instructions may vary for your model.
Perform the following to configure the IP address:
1. Conn
ect your machine and the computer using network cable.
2.In
sert the Installation CD-ROM,  and open the disk window. Open the 
MAC_Installer  > MAC_Printer  > SetIP  > SetIPApplet.html .
3. Doub
le click the file and  Safari will automatically open, then select 
Trust . The browser will open the  SetIPApplet.html page that shows 
the printer’s name and IP address information. 
4. Click on the 
 icon (third from left) in the SetIP window to open the 
TCP/IP configuration window.
5. Ente
r the printer’s new information into the configuration window as 
follows. In a corporate intranet, you may need to have this 
information assigned by a network manager before proceeding.
• MAC Addres
 s: Find the machine’s MAC address from the  Network 
Configuration Report  and enter it without the colons. For 
example, 00:15:99:29:51:A8 becomes 0015992951A8.
 The MAC address is the hardware serial number of the 
on-board network interface and can be found on the 
Network Configuration Report .
• IP Ad
dress : Enter a new IP address for your printer.
For example, if your computer’s  IP add
 ress is 192.168.1.150, 
enter 192.168.1.X. (X is number between 1 and 254 other than 
the computer’s address.)
• Su
bnet Mask : Enter a new Subnet Mask for your machine.
• Default Gateway : Enter a new Gate
 way for your machine.
6. Select  Apply, then OK, an
 d OK again. The printer will automatically 
print the configuration report. Conf irm that all of the settings are 
correct.  Quit Safari . You may close and eject the installation 
CD-ROM. If necessary, restart the  computer’s firewall. You have 
successfully changed the IP address, subnet mask, and gateway.
IPv4 setting using SetIP Program (Linux)
The SetIP program should be automatically installed during the printer 
driver installation.
 The path and UIs may differ by Linux OS version. Refer to the 
Linux OS manual to turn firewall off.
1. Pri
nt the machine’s network configuration report to find your machine’s 
MAC address. 
2. Ope
n the / opt/Samsung /mfp /share /utils /.
3. Doub
le click the  SetIPApplet.html file. 
4. Click to
 open the TCP/IP configuration window. 
5.Ente
r the MAC address, IP address,  subnet mask, default gateway, 
and then click  Apply. 
 When you enter the MAC address,  enter it without a colon(:).
6. The
 machine prints the network informa tion. Confirm all of the settings 
are correct. 
7. Close the SetIP prog
 ram. 
Network parameter setting
You can also set up the various network settings through the network 
administration programs such as SyncThru™ Web Admin Service and 
SyncThru™ Web Service.
Restoring factory default settings using SyncThru™ 
Web Service
1.Start a web browser such as Internet Explorer, Safari or Firefox and 
enter your machine’s new IP address in the browser window.
For example,
2. Click  Go to access the SyncThru™ Web Service.
3. Click  Log
 in on the upper right of the SyncThru™ Web Service 
website.
A log-in page appears. 
4. T
ype in the  ID and  Password  then click Login .
If it’s your first time logging into  SyncT
 hru™ Web Service, type in the 
below default ID and password.
• ID:  admin  
• Password:  sec00000  
5. W
hen the  SyncThru™ Web Service  window opens, click Settings > 
Network Settings  > Restore Default .
6. Click  Cl
ear  for network.
7. T
urn off and restart machine to apply settings.
Installing network conne cted machine’s driver
You must install the printer driver  software for printing. The software 
includes drivers, applications, and other user friendly programs.
Make sure that the network setup for your machine is completed. All 
ap

plications should be closed on your computer before beginning 
installation. 
Windows
This is recommended for most users. All components necessary for 
machine operations will be installed.
Follow the steps below:
1. Make
 sure that the machine is connected to the network and powered 
on.
2. Inse
rt the supplied software CD into your CD-ROM drive.
•Th
e software CD should automatically run and an installation window 
appear.
• If th
e installation window does not appear, click  Start and then  Run. 
Type X:\ Setup.exe , replacing “X” with the letter which represents 
your CD-ROM drive. Click  OK.
• If you use Wi
 ndows Vista, Window s 7 and Windows 2008 Server R2, 
click  Start  > All programs  > Accessories >  Run.
Type X:\ Setup.exe  
 replacing “X” with the letter which represents 
your CD-ROM drive and click  OK.
• If
 the  AutoPlay  window appears in Windows Vista, Windows 7 and 
Windows 2008 Server R2, click Run  Setup.exe  in Install or run 
program  field, and click  Continue or Yes  in the  User Account 
Control  windows.
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup_ 4
3.Select  Install now .
If necessary, select a language from the drop-down list.
 •For CLX-6250 Series installation window, you can see  Wireless 
Setting and Installation  menu. You can use this menu if an 
optional wireless network card is installed and/or the machine 
is connected to your computer with a USB cable. 
Install the optional wireless network card. Instructions for 
W
 ireless Setting and Installation , refer to the wireless 
network installation guide provided with the optional wireless 
network card. 
• T
he  Advanced Installation  has two options, Custom 
Installation and  Install Software Only . Custom Installation  
allows you to select the machine’s connection and choose 
individual component to install.  Install Software Only allows 
you to install the supplied software, such as Smart Panel. 
Follow the guide in the window.
• Admin
istrator Installation provides convenient installation 
methods useful for administrators (See  Administrator’s Guide 
(Windows only) on page  1 ).
4. Read
  License Agreement , and select I accept the terms of the 
License Agreement . Then, click Next.
The program searches for the machine.
 If your machine is not found in t he network or locally, the following  window will appear.
•
Check if you want to install the software without connecting 
the printer to the  network or locally.
-Check 
this option to install this program without a machine  connected. In this case, the print a test page window will be 
skipped, and completes the installation.
• Sear
ch again
When you press this button, the firewall notice window 
appe
 ars;
-Turn off 
the firewall and  Search again. For Window operating 
system, click  Start > Control Panel  > Windows Firewall , 
and inactivate this  option. For other operating systems, 
refer to their on-line guides.
-Turn off 
all firewall from the third partys program beside the  operating system. Refer to  the manual provided by 
individual programs.
• Direct Inp
ut
The  Di
rect Input  allows you to search a specific machine on 
the network.
-S
earch by IP address : Enter the IP address or the host 
name. Then click Next .
To verify your machine’s IP address, print a network 
config
 uration report (See Printing a machine report on 
page  1 ).
-Se
arch by network path: To  find a shared machine (UNC 
Path), enter the shared name manually or find a shared 
printer by clicking the  Browse button. Then click  Next.
• Help
If your machine is not connect ed 
 to the computer or network, 
This help button gives detailed information about the how to 
connect the machine.
5. The
 searched machines will be shown on the screen. Select the one you 
wish to use and click  Next.
 If the driver searched only one machine, the confirmation window 
appears.
6. After the
  installation is finished, a window asking you to print a test page 
appears. If you want to print a test page, click  Print a test page.
Otherwise, just click  Next and 
 skip to step 8.
7. If 
the test page prints out correctly, click Yes .
If not, click  No to r
 eprint it.
8. T
o register as a user of the machine  in order to receive information from 
Samsung, click  On-line Registration.
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup_ 5
9.Click Finish.
 •After the driver setup, you may enable firewall.
•If the printer driver does not work properly, follow the steps below to 
repair or reinstall the driver. 
a)Make sure that the machine is connected to your machine and 
powered on.
b)From the Start menu, select Programs or All Programs > 
Samsung Printers > your printer driver name > 
Maintenance.
c)Select the option as you wish, follow the instruction on the 
window.
Macintosh
1.Make sure that the machine is connected to your network and powered 
on. Also, your machine’s IP address should have been set. 
2.Insert the supplied software CD into your CD-ROM drive.
3.Double-click the CD-ROM icon that appears on your Macintosh desktop.
4.Double-click the MAC_Installer folder.
5.Double-click the Installer OS X icon.
6.Enter the password and click OK.
7.The Samsung Installer window opens. Click Continue.
8.Read the license agreement and click Continue.
9.Click Agree to agree to the license agreement.
10.The Samsung Installer window opens. Click Continue.
11.Select Easy Install and click Install. Easy Install is recommended for 
most users. All components necessary for machine operations will be 
installed. 
•If you select Custom Install, you can choose individual components to 
install.
12.The message which warns that all applications will close on your 
computer appears. Click Continue.
 If you select Typical installation for a network printer during the 
machine driver installation, the SetIP program automatically runs. 
If the machine has already configured network information, close 
the SetIP program. Go to the next step.
13.After the installation is finished, click Quit.
14.Open the Applications folder > Utilities > Print Setup Utility.
•For Mac OS X 10.5~10.6, open the Applications folder > System 
Preferences and click Print & Fax.
15.Click Add on the Printer List.
•For Mac OS X 10.5~10.6, click the “+” icon; a display window will pop 
up. 
16.For Mac OS X 10.3, select the IP Printing tab. 
•For Mac OS X 10.4, click IP Printer.
•For Mac OS X 10.5~10.6, click IP.
17.Select Socket/HP Jet Direct in Printer Type.
 When printing a document containing many pages, printing 
performance may be enhanced by choosing Socket for Printer 
Type option.
18.Enter the machine’s IP address in the Printer Address field.
19.Enter the queue name in the Queue Name field. If you cannot determine 
the queue name for your machine server, try using the default queue 
first.
20.For Mac OS X 10.3, if Auto Select does not work properly, select 
Samsung in Printer Model and your machine name in Model Name.
•For Mac OS X 10.4, if Auto Select does not work properly, select 
Samsung in Print Using and your machine name in Model. 
•For Mac OS X 10.5~10.6, if Auto Select does not work properly, select 
Select a driver to use... and your machine name in Print Using. 
Your machine appears on the Printer List, and is set as the default 
machine.
21.Click Add.
 If the printer driver does not work properly, uninstall the driver and 
reinstall it. 
Follow steps below to uninstall the driver for Macintosh.
a)Make sure that the machine is connected to your computer and 
powered on.
b)Insert the supplied software CD into your CD-ROM drive.
c)Double-click CD-ROM icon that appears on your Macintosh 
desktop.
d)Double-click the MAC_Installer folder.
e)Double-click the Installer OS X icon.
f)Enter the password and click OK.
g)The Samsung Installer window opens. Click Continue.
h)Select Uninstall and click Uninstall. 
i)When the message which warns that all applications will close on 
your computer appears, Click Continue.
j)When the uninstall is done, click Quit.
Linux
Install Linux Driver
1.Make sure that the machine is connected to your network and 
powered on. Also, your machine’s IP address should have been set. 
2.From the Samsung website, download the Unified Linux Driver 
package to your computer.
3.Right click the Unified Linux Driver package and extract the package. 
4.Double click cdroot > autorun.
5.The Samsung Installer window opens. Click Continue.
6.The Add printer wizard window opens. Click Next.
7.Select Network printer and click Search button.
8.The Printer’s IP address and model name appears on list field.
9.Select your machine and click Next.
10.Input the printer description and Next.
11.When the add printer is done, click Finish.
12.When the install is done, click Finish.
Add network Printer
1.Double-click the Unified Driver Configurator.
2.Click Add Printer…
3.The Add printer wizard window opens. Click Next.
4.Select Network printer and click the Search button.
5.The printer’s IP address and model name appears on list field.
6.Select your machine and click Next.
7.Input the printer description and Next
8.When the add printer is done, click Finish.
UNIX
To use UNIX Printer Driver, you have to install the UNIX printer driver 
package first, then setup the printer. You can download the UNIX Printer 
Driver package from the Samsung website.
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup_ 6
Installing the UNIX printer driver package
Installation procedure is common for all variants of UNIX OS mentioned 
(See 
UNIX on page 3).
1.From the Samsung website, download and unpack the UNIX Printer 
Driver package to your computer.
2.Acquire root privileges. 
su -
3.Copy appropriate driver archive to the target UNIX computer.
 See administration guide of your UNIX OS for details.
4.Unpack the UNIX printer driver package archive.
For example, on IBM AIX use the following commands.
cd /tmp
gzip –dc /cdrom/unix/packages/aix_power/aix_power.tar.gz | tar 
–xvf –
The “binaries” folder consists of binz, install, share files and folders
5.Copy the “binaries” folder to any local folder.
6.Change to the driver’s “binaries” directory.
cd aix_power/binaries
7.Run the install script.
./install
install is the installer script file which is used to install or uninstall the 
UNIX Printer Driver package.
Use “chmod 755 install” command to give the permission to the 
installer script.
8.Execute the “. /install –c” command to verify install results.
9.Run ‘installprinter’ from the command line. This will bring up the Add 
Printer Wizard window. Setup the printer in this window referring the 
procedure next.
 On some UNIX OS, for example on Solaris 10 just added 
printer may not be enabled and/or may not accept jobs. In this 
case run the following two commands on the root terminal:
accept 
enable 
Uninstalling the printer driver package
 The uninstalling printer utility should be used to delete the printer 
installed in the system.
a)Run “uninstallprinter” command from the terminal.
It will open the Uninstall Printer Wizard
The installed printers are listed in the drop-down list
b)Select the printer to be deleted.
c)Click Delete to delete the printer from the system.
d)Execute the “. /install –d” command to uninstall the whole 
package.
e)To verify uninstall results, execute the “. /install –c” command.
To reinstall it again, use the command “. /install” to reinstall the binaries.
Setting up the printer
To add the printer to your UNIX system, run ‘installprinter’ from the 
command line. This will bring up the Add Printer Wizard window. Setup 
the printer in this window according to the following steps:
1.Type the name of the printer.
2.Select appropriate printer model from model list.
3.Enter any decsription corresponding to the type of the printer in the 
Type field. This is optional.
4.Specify any printer description in the Description field. This is 
optional.
5.Specify printer location in the Location field.
6.Type the IP address or DNS name of the printer in the Device textbox 
for network-connected printers. On IBM AIX with jetdirect Queue 
type only DNS name is possible, numeric IP address is not allowed.
7.Queue type shows the connection as lpd or jetdirect in the 
corresponding list box. Additionally usb type is available on Sun 
Solaris OS.
8.Select Copies to set the number of copies.
9.Check the Collate option to receive copies already sorted.
10.Check the Reverse Order option to receive copies in the reverse 
order.
11.Check the Make Default option to set this printer as default.
12.Click OK to add the printer.
IPv6 Configuration
 
TCP/IPv6 is supported properly only in Windows Vista or higher.
 If the IPv6 network seems to not be working, set all the network setting 
to the factory defaults and try again (See 
Restoring factory default settings using SyncThru™ Web Service on page 3).
To use the IPv6 network environment, follow the next procedure to use the 
IPv6 address:
1.Connect your machine to the network with a network cable.
2.Turn on the machine.
3.Print a Network Configuration Report from the machine’s control 
panel that will check IPv6 addresses.
 a)Press Menu on the control panel.
b)Press the up/down arrow to highlight Network and press OK.
c)Press the up/down arrow to highlight Network Info. and press 
OK.
4.Select Start > Control Panel > Hardware and Sound > Printers > Add 
Printer.
5.Click Add a local printer on the Add Printer windows.
6.Follow the instruction on the window.
 If the machine does not work in the network environment, activate 
IPv6. Refer to the next section followed by.
Activating IPv6
1.Connect your machine to the network with a network cable.
2.Turned on the machine.
3.Press Menu on the control panel.
4.Press up/down arrow to highlight Network and press OK.
5.Press up/down arrow to highlight TCP/IP (IPv6) and press OK.
6.Press up/down arrow to highlight IPv6 Activate and press OK.
7.Press up/down arrow to highlight On and press OK.
 On is set as a default.
8.Turn the machine off and turn it on again.
9.Print a Network Configuration Report from the machine’s control 
panel that will check IPv6 addresses.
 1.Press Menu on the control panel.
2.Press up/down arrow to highlight Network and press OK.
3.Press up/down arrow to highlight Network Info. and press OK.
Downloaded From ManualsPrinter.com Manuals 
						

							Network setup_ 7
Setting IPv6 addresses
Machine supports following IPv6 addresses for network printing and 
managements.
•Link-local Address: Self-configured local IPv6 address. (Address starts 
with FE80.)
•Stateless Address: Automatically configured IPv6 address by a 
network router.
•Stateful Address: IPv6 address configured by a DHCPv6 server.
•Manual Address: Manually configured IPv6 address by a user.
DHCPv6 address configuration (Stateful)
If you have a DHCPv6 server on your network, you can set one of the 
following option for default dynamic host configuration:
1.Press Menu on the control panel.
2.Press up/down arrow to highlight Network and press OK.
3.Press up/down arrow to highlight TCP/IP (IPv6) and press OK.
4.Press up/down arrow to highlight DHCPv6 Config and press OK.
5.Press up/down arrow to access the required value.
•Routers: Use DHCPv6 only when requested by a router.
•DHCPv6 Addresses: Always use DHCPv6 regardless of router 
request.
•DHCPv6 Off: Never use DHCPv6 regardless of router request.
6.Press OK.
Manual address configuration
1.Start a web browser such as Internet Explorer that supports IPv6 
addressing as a URL (See 
Connecting SyncThru™ Web Service 
on page 7).
 For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the 
address field and press the Enter key or click Go.
2.Click Login on the upper right of the SyncThru™ Web Service 
website.
A log-in page appears. 
3.Type in the ID and Password then click Login .
If it’s your first time logging into SyncThru™ Web Service, type in the 
below default ID and password.
•ID: admin 
•Password: sec00000 
4.When the SyncThru™ Web Service window opens, click Settings > 
Network Settings.
5.Click TCP/IPv6.
6.Enable the Manual Address In the TCP/IPv6 section.
 IPv6 Protocol should enable.
7.Select the Address / Prefix and click the Add button, then the router 
prefix will automatically be entered into the address field. 
Enter the rest of address. (ex: 3FFE:10:88:194::AAAA. “A” is the 
hexadecimal 0 through 9, A through F.)
8.Click the Apply button.
Installing printer driver
Driver installation for network printer in IPv6 network environment is same 
as TCP/IPv4 (See Installing network connected machine’s driver on 
page 3).
Select TCP/IP Port and when the list of machines are displayed, simply 
select your machines IPv6 address.
Connecting SyncThru™ Web Service
1.Start a web browser such as Internet Explorer that supports IPv6 
addressing as a URL .
2.Click Go to access the SyncThru™ Web Service.
3.Click Login on the upper right of the SyncThru™ Web Service website.
A log-in page appears. 
4.Type in the ID and Password then click Login .
If it’s your first time logging into SyncThru™ Web Service, type in the 
below default ID and password.
•ID: admin 
•Password: sec00000 
5.Select one of the IPv6 addresses (Link-local Address, Stateless 
Address, Stateful Address, Manual Address) from Network 
Configuration Report.
6.Enter the IPv6 addresses. (ex: http://[FE80::215:99FF:FE66:7701]) 
 
Address must be enclosed in [] brackets.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic setup_ 1
1.basic setup
After installation is complete, you may want  to set the machine’s default settings. Refer to the next section if you would like 
to set or change values. This chapter gives you step-by-step in structions for setting up the machine.
This chapter includes:
•Altitude adjustment
• Changing the display language
• Setting the date and time
• Changing the clock mode
• Changing the default mode
• Setting sounds
• Entering characters using the number keypad
• Using the power saving mode •
Setting job timeout
• Auto continue
• Paper substitution
• Net accounting
• Setting the color report
• Setting the default tray and paper
• Changing the font setting
  
Altitude adjustment
The print quality is affected by atmospheric pressure, which is determined 
by the height of the machine above sea level. The following information will 
guide you on how to set your machine to the best print quality or best quality 
of print.
Before you set the altitude value, determine the altitude where you are.
0
1High 3
2High 2
3High 1
4Normal
In the control panel
1. Press  Menu on the control panel.
2. Pre
ss the up/down arrow to highlight  System Setup and press OK.
3. Pre
ss the up/down arrow to highlight  Machine Setup and press OK.
4. Pre
ss the up/down arrow to highlight  Altitude Adjust and press OK.
5. Pre
ss the up/down arrow until the setting option you want appears.
6.Pr
ess  OK to save the selection.
7. Pr
ess  Stop/Clear to return to ready mode.
In the computer
1.Double-click the Smart Panel  icon on the Windows task bar (or 
Notification Area in Linux). You can also click  Smart Panel on the status 
bar in Mac OS X  (See Understanding Smart Panel on page  2 ).
Or, if you are a Windows user , you can
  launch it from the Start menu, 
select  Programs  or All Programs  > Samsung Printers  > your printer 
driver name  > Smart Panel .
2. Click  Printer Setting .
3. Click  Setting  > Altitude Adjustment . Sele
 ct the appropriate value from 
the dropdown list, and then click  Apply.
 If your machine is connected to a network, SyncThru™ Web Service 
screen appears automatically. Click  Settings > Machine Settings  >  System
 > Setup  > Altitude Ad .. Select the appropriate altitude value, 
and then click  Apply.
If it’s your first time logging into SyncThru™ Web Service, type in the 
be
 low default ID and password.
• ID
:  admin  
• Passwor
d:  sec00000  
Changing the display language
To change the language that appears on the display, follow the steps below:
1.Pres
s  Menu on the control panel.
2. Pre
ss the up/down arrow to highlight  System Setup and press OK.
3. Pre
ss the up/down arrow to highlight  Machine Setup and press OK.
4. Pre
ss the up/down arrow to highlight  Language and press  OK.
5. Pre
ss the up/down arrow to display the language you want.
6.Pres
s  OK to save the selection.
7. Pres
s  Stop/Clear  to return to ready mode.
Setting the date and time
When you set the time and date, they are used in delay fax and delay print. 
They are printed on reports. If, however , they are not correct, you need to 
correct it to the present date and time.
 If the machine’s power is cut off, you need to reset the correct time 
and date once the power has been restored.
1. Pres
s  Menu on the control panel.
2. Pre
ss the up/down arrow to highlight  System Setup and press OK.
3. Pre
ss the up/down arrow to highlight  Machine Setup and press OK.
4. Pre
ss the up/down arrow to highlight  Date & Time and press OK.
5. En
ter the correct time and date us ing up/down, left/right arrow or 
numeric keypad.
Month = 01 to 12,
Day = 01 to 31,
Year = requires four digits,
Hour = 01 to 12,
Minute = 00 to 59
Downloaded From ManualsPrinter.com Manuals 
						

							Basic setup_ 2
6.Press  OK to save the selection.
7. Pr
ess  Stop/Clear to return to ready mode.
Changing the clock mode
You can set your machine to display the current time using either a 12-hour 
or 24-hour format.
1.Pr
ess  Menu on the control panel.
2. Pre
ss the up/down arrow to highlight  System Setup and press OK.
3. Pre
ss the up/down arrow to highlight  Machine Setup and press OK.
4. Pre
ss the up/down arrow to highlight  Clock Mode and press OK.
5. Pre
ss the up/down arrow to select the other mode and press  OK.
6. Pr
ess  Stop/Clear to return to ready mode.
Changing the default mode
Your machine is preset to Copy mode. You can switch this default mode 
between Fax mode and Copy mode.
1.Pr
ess  Menu on the control panel.
2. Pre
ss the up/down arrow to highlight  System Setup and press OK.
3. Pre
ss the up/down arrow to highlight  Machine Setup and press OK.
4. Pre
ss the up/down arrow to highlight  Default Mode and press OK.
5. Pre
ss the up/down arrow to select the mode you want.
6.Pr
ess  OK to save the selection.
7. Pr
ess  Stop/Clear to return to ready mode.
Setting sounds
You can control the following sounds:
•Key Sou
 nd: Turns the key sound  On or  Off . W ith this option set to On, 
a tone sounds each time a key is pressed.
• Al
arm Sound:  Turns the alarm sound  On or Off .  With this option set to 
On , an alarm tone sounds when an error occurs or fax communication 
ends.
• Spea
ker:  Turns  On or  Off  the sounds from the telephone line through 
the speaker, such as a dial tone or a fax tone. With this option set to 
Comm.  which means “ Comm.”, the speaker is on until the remote 
machine answers.
 You can adjust the volume level using  On Hook Dial.
• Ri
nger:  Adjusts the ringer volume. For the ringer volume, you can 
select  Off, Lo
w, Mid , and  High.
Speaker, ringer, key sound, and alarm sound
1.Press  Menu on the control panel.
2. Pre
ss the up/down arrow to highlight  System Setup and press OK.
3. Pre
ss the up/down arrow to highlight  Sound/Volume and press OK.
4. Pre
ss the up/down arrow until the sound option you want highlights and 
press  OK.
5. Pre
ss the up/down arrow until the desired status or volume for the sound 
you have selected highlights and press  OK.
6. If necessary, re
 peat steps 4 through 5 to set other sounds.
7. Pr
ess  Stop/Clear to return to ready mode.
Speaker volume
To adjust the volume using  On Hook Dial: 1.
Pres
s  On Hook Dial . A dial tone sounds from the earpiece.
2. Pre
ss the left/right arrow until you hear the volume you want.
3.Pres
s  On Hook Dial  to save the change and return to ready mode.
Entering characters using the number keypad
As you perform various tasks, you may need to enter names and numbers. 
For example, when you set up your ma chine, you enter your name or your 
company’s name, and the fax number. When you store fax numbers or 
email addresses in memory, you may also enter the corresponding names.
Entering alphanumeric characters
1. When you are prompted to enter a le tter, locate the button labeled with 
the character you want. Press the bu tton until the correct letter appears 
on the display. 
For example, to enter the letter O, press 6, labeled with MNO.
Each time you press 6, the display sh ows 
 a different letter, M, N, O, m, 
n, o and finally 6.
You can enter special characters, such as space, plus sign, and etc. For 
d
 etails, see the below section.
2. T
o enter additional letters, repeat step 1.
If the next letter is printed on t he same bu
 tton, move the cursor by 
pressing the left/right arrow butto n and then press the button labeled 
with the letter you want. The cursor will move to the right and the next 
letter will appear on the display.
You can enter a space by pressing 1 twice.
3. W
hen you have finished entering letters, press  OK.
Keypad letters and numbers
 Some of the follow key values may not appear depending on the job 
you are doing.
KeyAssigned numbers, letters, or characters
1@ / . ‘ 1
2A B C a b c 2
3D E F d e f 3
4G H I g h i 4
5J K L j k l 5
6M N O m n o 6
7P Q R S p q r s 7
8T U V t u v 8
9W X Y Z w x y z 9
0& + - , 0_
* *
% ^ ~ ! # $ ( ) [ ] (These symbols are available when you type 
for network authentication.)
# #
= | ?  : { } < > ; (These symbols are available when you type for 
network authe

ntication.)
Downloaded From ManualsPrinter.com Manuals