Samsung CLX 6250FX User Manual

							Regulatory information_ 5
Russia only
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful fo r any person to use a computer or other electronic device to send any 
message via a telephone facsimile machine unless such message clearly  contains in a margin at the top or bottom of each transmitted page or 
on the first page of the transmission the following information:
1. the
 date and time of transmission
2.iden
tification of either business, business entity or individual sending the message; and
3.tel
ephone number of either the sending machin e, business, business entity or individual.
The Telephone Company may make changes in its communications fac ilitie
 s, equipment operations or procedures where such action is 
reasonably required in the operation of its business and is not inco nsistent with the rules and regulations in FCC Part 68. If such changes can 
be reasonably expected to render any cust omer terminal equipment incompatible with telephone company communications facilities,  or require 
modification or alteration of such terminal equipment, or otherwis e materially affect its use or performance, the customer shall be given 
adequate notice in writing, to allow the customer an opportunity to maintain uninterrupted service
Ringer Equivalence Number
The Ringer Equivalence Number and FCC Registration Number for this  machine may be found on the label located on the bottom or rear of the 
machine. In some instances you may need to provide these numbers to the telephone company.
The Ringer Equivalence Number (REN) is a measure of the electrical  
 load placed on the telephone line, and is useful for determining whether 
you have “overloaded” the line. Installing several types of equipment on the same telephone line may result in problems making  and receiving 
telephone calls, especially ringing when your line is called. The sum of all Ringer Equivalence Numbers of the equipment on you r telephone 
line should be less than five in order to assure proper service fr om the telephone company. In some cases, a sum of five may no t be usable on 
your line. If any of your telephone equipment  is not operating properly, you should immediately remove it from your telephone line, as it may 
cause harm to the telephone network.
The equipment complies with Part 68 of the FCC rules and the requir ements a
 dopted by the ACTA. On the rear of this equipment is a label that 
contains, among other information, a produc t identifier in the format US:AAAEQ##TXXXX. If  requested, this number must be provided to the 
telephone company.
 
FCC Regulations state that changes  or modifications to this equipment not expressl y approved by the manufacturer could void the user’s 
authority to operate this  equipment. In the event that termin al equipment causes harm to the telephone network, the telephone c ompany 
should notify the customer that service may be stopped. However,  where prior notice is impractical, the company may temporarily cease 
service, providing that they:
a) p
romptly notify the customer.
b)g
ive the customer an opportunity to correct the equipment problem.
c)in
form the customer of the right  to bring a complaint to the Federal Communicati on Commission pursuant to procedures set out in  FCC 
Rules and Regulations Subpart E of Part 68.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 6
You should also know that:
•Your machine is not designed to be connected to a  digital PBX system.
• If 
you intend to use a computer  modem or fax modem on the same phone line as your machine, you may experience transmission and 
reception problems with all the equipment. It is recommended that  no other equipment, except for a regular telephone, share the line with 
your machine.
• If 
your area experiences a high incidence of lightning or power  surges, we recommend that you install surge protectors for both the power 
and the telephone lines. Surge protectors can be purchased from your dealer or  telephone and electronic specialty stores.
• Whe
n programming emergency numbers and/or making test call s to emergency numbers, use a non-emergency number to advise the 
emergency service dispatcher of your intentions. The dispatcher will give you further instructions on how to actually test the  emergency 
number.
• Thi
s machine may not be used on coin service or party lines.
•Thi
s machine provides magnetic coupling to hearing aids.
You may safely connect this equipment to the telephone ne two
 rk by means of a standard modular jack, USOC RJ-11C.
Replacing the Fitted Plug (for UK Only)
Important
The mains lead for this machine is fitted with a standard (BS 1363)  13 amp plug and has a 13 amp fuse. When you change or examine the 
fuse, you must re-fit the correct 13 amp fuse. You then need to  replace the fuse cover. If you have lost the fuse cover, do not use the plug until 
you have another  fuse cover. 
Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should  be suitabl
 e. However, some buildings (mainly old ones) do not have normal 
13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.
 
If you cut off the moulded plug,  get rid of it straight away.
You cannot rewire the plug and you may receive an  electric shock if 
 you plug it into a socket.
Important warning: 
You must earth this machine.
The wires in the mains lead have the following color code:
•G
reen and Yellow:  Earth
• Blue:  Neutral
• Brow
n:  Live
If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin marked by the 
 letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or 
green.
You must connect the blue wire to the pin whic h
  is marked with the letter “N” or colored black.
You must connect the brown wire to the pin wh ich is marked with th
 e letter “L” or colored red.
You must have a 13 amp fuse in the plug,  
 adaptor, or at the distribution board.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 7
Declaration of Conformi ty (European Countries)
Approvals and Certifications
The CE marking applied to this product symbolizes Samsung Electron ics Co., Ltd. Declaration of Conformity with the following applicable 
93/68/EEC Directives of the European  Union as of the dates indicated:
Hereby, Samsung Electronics declare that this  
 product is in compliance with the essential requirements and other relevant provisions of:
R&TTE Directive (1999/5/EC)
The declaration of conformity may be consulted at www.samsung.com/printer , go to Support > Download center and enter your printer (MFP) 
name to browse the EuDoC. 
January 1, 1995:  Council Directive 2006/95/EC Approximation of the laws of  
 the member states related to low voltage equipment.
January 1, 1996:  Council Directive 2004/108/EC (92/31/EEC),  app
 roximation of the laws of the Member States related to electromagnetic 
compatibility.
March 9, 1999:  Council Directive 1999/5/EC on radio equipment and telecommu n
 ications terminal equipment and the mutual recognition of 
their conformity. A full declaration, defining the relevant Direc tives and referenced standards can be obtained from your Samsu ng Electronics 
Co., Ltd. representative.
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pa n-Europ
 ean single terminal connection to the analogue public switched 
telephone network (PSTN) in accordance with  Directive 1999/5/EC. The product has been designed to work with the national PSTNs and 
compatible PBXs of the European countries:
In the event of problems, you should  contact the 
 Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and ap
 plication of terminal equipment which complies with this standard, the 
European Telecommunication Standards Institut e (ETSI) has issued an advisory document (EG 201 121) which contains notes and add itional 
requirements to ensure network compatibility of TBR21 termina ls. The product has been designed against, and is fully compliant with, all of the 
relevant advisory notes contained in this document.
European Radio Approval Information (for products fitted with EU-approved radio devices)
Low power, Radio LAN type devices (radio frequency (RF) wireless co mmunication devices), operating in the 2.4 GHz/5 GHz band, may be 
present (embedded) in your printer system wh ich is intended for home or office use. This section is only applicable if these de vices are present. 
Refer to the system label to verify  the presence of wireless devices.
Wireless devices that may be in your system are only qualified for  use in the Europe
 an Union or associated areas if a CE mark with a Notified 
Body Registration  Number and the Alert Symbol  is on the system label.
The power output of the wireless device or devices that may be embed
 ded in you printer is well below the RF exposure limits as set by the 
European Commission through the R&TTE directive.
European States qualified under wireless approvals:
EU Austria, Belgium, Cyprus, Czech Republic,  Denmark, Esto nia, Finland, France (with frequency restrictions), Germany, Greece, 
Hungary, Ireland, Italy, Latvia, Lithuania,  Luxembourg, Malta, The Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, 
Sweden and the U.K.
EEA/EFTA 
co
 untries Iceland, Liechtenstein, Norway and Switzerland
European States with restrictions on use:
EU
In France, the frequency range is restricted to 2446.5-2483. 5 MHz  for devices above 10 mW transmitting power such as 
wireless
In Italiy, if used outsid e of 
 own premises, general authorization is required
In Russian, only for indoor applications
EEA/EFTA 
co
 untries No limitations at this time.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 8
REGULATORY COMPLIANCE STATEMENTS
Wireless Guidance
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be 
present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The 
wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If 
the country you will be using the wireless device in, is not listed, contact your local Radio Approval agency for requirements. Wireless devices 
are closely regulated and use may not be allowed.
The power output of the wireless device or devices that may be embedded in your printer is well below the RF exposure limits as known at this 
time. Because the wireless devices (which may be embedded into your printer) emit less energy than is allowed in radio frequency safety 
standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken 
to minimize human contact during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body 
(this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are 
on and transmitting.
This transmitter must not be collocated or operation in conjunction with any other antenna or transmitter.
Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:
 
Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require 
wireless devices to be turned off while traveling in an airplane. IEEE 802.11 (also known as wireless Ethernet) and Bluetooth 
communication devices are examples of devices that provide wireless communication.
 
In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless 
device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where 
use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless 
devices, ask the applicable authority for authorization prior to use or turning on the wireless device.
 
Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when 
traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions 
on the use of a wireless device in the destination country.
 
If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and 
shields are in place and the system is fully assembled.
 
Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to 
use it. Contact manufacturer for service.
 
Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact 
manufacturer Technical Support for additional information.
OpenSSL License
Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1.Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the 
documentation and/or other materials provided with the distribution.
3.All advertising materials mentioning features or use of this software must display the following acknowledgment: This product includes 
software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
4.The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without 
prior written permission. For written permission, please contact [email protected].
5.Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written 
permission of the OpenSSL Project.
6.Redistributions of any form whatsoever must retain the following acknowledgment: This product includes software developed by the 
OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, 
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 9
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young([email protected]). This product includes software written by Tim Hudson 
([email protected]).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with 
Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to 
all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this 
distribution is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]). Copyright remains Eric Youngs, 
and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given 
attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation 
(online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1.Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the 
documentation and/or other materials provided with the distribution.
3.All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes 
cryptographic software written by Eric Young ([email protected]) The word cryptographic can be left out if the rouines from the library 
being used are not cryptographic related.
4.If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an 
acknowledgement: This product includes software written by Tim Hudson ([email protected]).
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, 
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply 
be copied and put under another distribution licence [including the GNU Public Licence.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 10
China only
Downloaded From ManualsPrinter.com Manuals 
						

							About this user’s guide_ 1
about this user’s guide
This user’s guide provides information about how to use the machine. Both novice and professional users can refer to this 
as a guide for installing and using the machine.
 • Read the safety information before using the machine.
• If you have
  a problem using the machine,  refer to the troubleshooting chapter (See  Troubleshooting on page 1 ).
• Te
rms used in this user’s guide are explained in the glossary chapter (See  Glossary on page 1 ).
• All ill
ustrations in this user’s guide may differ fr om your machine depending on its options or models.
• Th
e procedures in this user’s gui de are mainly based on Windows XP.
Convention
Some terms in this guide are used interchangeably, as below:
•Documen
 t is synonymous with original.
• Paper 
is synonymous with media, or print media.
•M
achine refers to printer or MFP.
The following table offers the conventions of this guide:
ConventionDescriptionExample
Bold For texts on the display or button names on the machine.Start
Note Provides additional information or detailed  spe cification of the machine function 
and feature. The date format may differ from country 
to country.
Caution Gives users information to protect the machine from possible mechanical 
d
amage or malfunction.
 
Do not touch the green surface of the 
toner cartridge. 
Footnote Provides additional more detailed information on certain words or a phrase. a. pages per minute
(“Cross-reference”)Guides users to a reference page for the additional detailed information. (See Finding more information )
Downloaded From ManualsPrinter.com Manuals 
						

							About this user’s guide_ 2
Finding more information
You can find information for setting up and using your machine from the following resources, either as a print-out or on screen.
Material nameDescription
Quick Install Guide
This guide provides basic information on setting up your machine.
User’s Guide
This guide provides you with step-by-step instructions for using  your machine’s full features, and contains information for maintaining 
your machine, troubleshooting and replacing supplies. 
Driver Help
This help provides you with help information on printer driver  and instructions for setting up the options for printing (See Using help on 
page  3 ).
Samsung website If you have Internet access, you can get help, support, machine  drivers, 
 manuals, and order information from the Samsung website, 
www.samsung.com/printer.
Downloadable 
software You can download useful software from the Samsung website. 
•
Sy
ncThru™ Web Admin Service : convenient for network administrators who  nee d to manage many machines simultaneously. 
This program is for network model on ly. (h
 ttp://solution.samsungprinter.com)
• Samsung AnyWeb Print : helps personal users to screen-capture the webs ite screen in
  Windows Internet Explorer easily. 
(http://solution.samsungprin ter.com/persona l/anywebprint)
• Samsung Easy Color Manager: helps Samsung color laser printer users to adjust color as they like. 
(http://solution.samsungprinte r.com/persona
 l/colormanager)
• XPS printer driver:  used to print documents in XPS 
 print path. XPS printer driver can be installed only on Windows Vista or higher.
• (http://www.samsung.com/printer)
Downloaded From ManualsPrinter.com Manuals 
						

							Features of your new product_ 1
features of your new product
Your new machine is equipped with a number of special  features that improve the quality of the documents you print.
Special Features
Print with excellent quality and speed
•You can print in a full range of colors using cyan, magenta, 
yellow, and black.
• You can prin
 t with a resolution of up to 9,600 x 600 dpi 
effective output.
• CLX-62
20 Series prints up to 20 ppm, A4-sized paper or up 
to 21 ppm, letter sized paper. 
• CLX-62
50 Series prints up to 24 ppm, A4-sized paper or up 
to 25 ppm, letter sized paper.
Handle many different types of printable material
• The multi-purpose tray supports envelopes, labels, 
custom-sized media, post cards, and heavy paper. 
• Th
e tray 1 and optional tray  support plain paper in various 
sizes (S
ee  Print media specifications on page  3 ).
Create professional documents (Windows only)
• Print Watermarks. You can cust omize your documents with 
words, such as “Confidential” (See Using watermarks on 
page  5 ).
• Print Po
 sters. The text and pi ctures of each page of your 
document are magnified and printed across the sheet of 
paper and can then be taped together to form a poster (See 
Printing posters on page  3 ).
• You 
can use preprinted forms with plain paper (See Using 
overlay (PCL driver only) on page  5 ).
Save time and money
• To save paper, you can print multiple pages on one single 
sheet of paper (See  Printing multiple pages on one sheet of 
paper on page  3 ).
• Th
is machine automatically conserves electricity by 
substantially reducing power consumption when not in use.
• To
 save paper, you can print on both sides of the paper 
(double-sided printing) (See  Printing on both sides of paper 
on page  4 ).
Expand your machine’s capacity
• Your machine has an extra memory slot to expand the 
memory (See  Available accessories on page  2 ).
• Zo
ran IPS Emulation* compatible with PostScript 3 (PS) 
enables PS printing.
*  Zoran IPS Emulation compat ible wi th PostScript 3: 
©Copyright 1995-2005, Zoran Corp oration. All rights reserved. 
Zoran, the Zoran logo, IPS/PS3, and OneImage are trademarks 
of Zoran Corporation.
136 PS3 fonts:  Contains UFST and MicroType from 
Monotype Imaging Inc.
Print in various environments
• You can print with various operating system such as 
Windows, Linux, Macint osh and UNIX systems (See 
System requirements on page  2 ).
• Your 
machine is equipped with a USB interface and a 
network interface.
Copy originals in several formats
• Your machine can copy multip le image copies from the 
original document on a single page (See  2-up or 4-up 
copying (N-up) on page  3 ).
• Th
e print quality and image size may be adjusted and 
enhance at the same time.
Scan the originals and send it right away
• Scan in color and use the prec ise compressions of JPEG, 
TIFF and PDF formats.
• Qu
ickly scan and send files to multiple destinations using 
Networks scanning (See  Sending a scanned image to 
several destinations as an email attachment on page  2 ).
Set a specific time to 
 transmit a Fax
•You can specify a certain time to transmit the fax and also 
send the fax to several stored destinations.
• After th
e transmission, the machine may print out the fax 
reports according to the setting.
Use USB flash memory devices
If you have a USB memory device, you can use it in various 
ways with your machine.
• Yo
u can scan docume nts and save them to the device.
• Yo
u can directly print data stored to the device.
Downloaded From ManualsPrinter.com Manuals 
						

							Features of your new product_ 2
IPv6
This machine supports IPv6. 
Features by Models
The machine is designed to support all of your document needs fr om printing and copying to more advanced networking solutions for your business. 
Some features and optional goods may not be available depending on models or countries.
Features by models include:
FEATURESCLX-6220 SeriesCLX-6250 Series
USB 2.0 ●●
USB Memory Interface ●●
Document Feeder ●●
Hard Disk ○
Network Interface Ethernet 10/100 BaseTX wired LAN ●●
Network Interface 802.11 b/g wireless LAN
a
a. Depending on your country, wireless LAN cards may not be available. Contact your local Samsung dealer or the retailer  where you bought your printer. ○
Duplex (2-sid ed) printing ●●
FAX ●●
Optional Tray 2 ○○
(  ●: In
cluded,  ○: Optional, Blank: Not available) 
Downloaded From ManualsPrinter.com Manuals