Ricoh Mp C6502 User Guide
Have a look at the manual Ricoh Mp C6502 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 147
Loading Paper into the Wide Large Capacity
Tray
• Check that the paper edges are aligned with the left side.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Load paper into the paper tray with print side up.
Do not stack paper over the limit mark.
3. Carefully push the paper tray fully in.
• If you select Thick Paper 2 to 4, [Coated Paper], [Label Paper], or [OHP (Transparency)] in [Tray
Paper Settings], air is blown out automatically to...](http://img.usermanuals.tech/thumb/64/79957/w64_mp-c6502-user-guide-1498814341_d-146.png "Page 147
Loading Paper into the Wide Large Capacity
Tray
• Check that the paper edges are aligned with the left side.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Load paper into the paper tray with print side up.
Do not stack paper over the limit mark.
3. Carefully push the paper tray fully in.
• If you select Thick Paper 2 to 4, [Coated Paper], [Label Paper], or [OHP (Transparency)] in [Tray
Paper Settings], air is blown out automatically to...")
![Page 153
Loading Orientation-fixed Paper or Two-sided
Paper
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or
copied paper) might not be printed correctly, depending on how the originals and paper are placed.
Settings for the User Tools
• Copier modeSpecify [Yes] for [Letterhead Setting] in [Input / Output] under the Copier / Document Server
Features menu, and then place the original and paper as shown below.
• Printer mode Specify [Auto Detect] or [On...](http://img.usermanuals.tech/thumb/64/79957/w64_mp-c6502-user-guide-1498814341_d-152.png "Page 153
Loading Orientation-fixed Paper or Two-sided
Paper
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or
copied paper) might not be printed correctly, depending on how the originals and paper are placed.
Settings for the User Tools
• Copier modeSpecify [Yes] for [Letterhead Setting] in [Input / Output] under the Copier / Document Server
Features menu, and then place the original and paper as shown below.
• Printer mode Specify [Auto Detect] or [On...")
![Page 155
• In copier mode:• For details about how to make two-sided copies, see page 59 "Duplex Copying".
• In printer mode: • To print on letterhead paper when [Auto Detect] is specified for [Letterhead Setting], you mustspecify [Letterhead] as the paper type in the printer driver's settings.
• If a print job is changed partway through printing from one-sided to two-sided printing, one- sided output after the first copy may be printed facing a different direction. To ensure all
paper is output facing...](http://img.usermanuals.tech/thumb/64/79957/w64_mp-c6502-user-guide-1498814341_d-154.png "Page 155
• In copier mode:• For details about how to make two-sided copies, see page 59 \"Duplex Copying\".
• In printer mode: • To print on letterhead paper when [Auto Detect] is specified for [Letterhead Setting], you mustspecify [Letterhead] as the paper type in the printer driver's settings.
• If a print job is changed partway through printing from one-sided to two-sided printing, one- sided output after the first copy may be printed facing a different direction. To ensure all
paper is output facing...")
Loading Paper into the Twin Interposer • Do not place anything on top of or leave documents on the sensor. This may lead to the paper sizenot being correctly scanned or paper jams. 1. While pressing the release lever, align the side fences with the paper size to be loaded. 2.Load paper orderly. Do not stack paper over the limit mark. Align the side fences gently against the paper you loaded, if necessary. 1. Paper extenders • Load paper with its printed side up (the front side). • Load paper in the twin interposer in the same orientation as paper in the paper tray. • The staple position or punch hole position will be on the left side of the paper, when you are facing the machine. • When loading paper larger than A4 (8 1 / 2 × 11) , pull out the paper extender. Loading Paper into the Twin Interposer 141 CVA032 CVA033 11
• To load the paper in the twin interposer, align the orientation of originals in the ADF as shownbelow.Twin interposerADF9. Adding Paper and Toner 142
Loading Orientation-fixed Paper or Two-sided Paper Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or copied paper) might not be printed correctly, depending on how the originals and paper are placed. Settings for the User Tools • Copier modeSpecify [Yes] for [Letterhead Setting] in [Input / Output] under the Copier / Document Server Features menu, and then place the original and paper as shown below. • Printer mode Specify [Auto Detect] or [On (Always)] for [Letterhead Setting] in [System] under the Printer Features menu, and then place the paper as shown below. For details about the letterhead settings, see "Input / Output", Copy/ Document Server , or "System", Print . Original orientation and paper orientation The meanings of the icons are as follows: IconMeaningPlace or load paper scanned or printed side face up.Place or load paper scanned or printed side face down. • Original orientation Original orientationExposure glassADFReadable orientationLoading Orientation-fixed Paper or Two-sided Paper 143
Original orientationExposure glassADFUnreadable orientation• Copy • Scanner • Paper orientation • Copier mode Copy sideTray 1Trays 2–3LCTBypass tray orwide LCTOne-sidedTwo-sided • Printer mode Print sideTray 1Trays 2–3LCTBypass tray orwide LCTOne-sidedTwo-sided9. Adding Paper and Toner 144
• In copier mode:• For details about how to make two-sided copies, see page 59 "Duplex Copying". • In printer mode: • To print on letterhead paper when [Auto Detect] is specified for [Letterhead Setting], you mustspecify [Letterhead] as the paper type in the printer driver's settings. • If a print job is changed partway through printing from one-sided to two-sided printing, one- sided output after the first copy may be printed facing a different direction. To ensure all paper is output facing the same direction, specify different input trays for one-sided and two- sided printing. Note also that two-sided printing must be disabled for the tray specified for one-sided printing. • For details about how to make two-sided prints, see page 92 "Printing on Both Sides of Sheets". Loading Orientation-fixed Paper or Two-sided Paper 145
Recommended Paper Sizes and Types This section describes recommended paper sizes and types. • If you use paper that curls, either because it is too dry or too damp, a staple clogging or paper jam may occur. • Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a misfeed. • When you load OHP transparencies, check the front and back of the sheets, and place them correctly, or a misfeed might occur. Tray 1 Paper type and weightPaper sizePaper capacity52.3–256.0 g/m 2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3 A4 8 1 / 2 × 11 1250 sheets × 252.3–256.0 g/m 2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3*1 8 1 / 2 × 11 A4 1250 sheets × 2 *1 To load paper any of the sizes specified above, contact your service representative. Tray 1 (A3/11 × 17 tray unit) Paper type and weightPaper sizePaper capacity52.3–256.0 g/m 2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3 A3 11 × 17 1000 sheets9. Adding Paper and Toner 146
Paper type and weightPaper sizePaper capacity52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3*1 A4, B4 JIS, 11 × 17, 8 1 / 2 × 14 , 8 1 / 2 × 11 A3, A4, B4 JIS, 8 1 / 2 × 14 , 8 1 / 2 × 11 1000 sheets52.3–256.0 g/m 2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3Custom size *2 : Vertical: 210.0–305.0 mm Horizontal: 210.0–439.0 mm Vertical: 8.27-12.00 inches Horizontal: 8.27-17.28 inches 1000 sheets *1 To load paper any of the sizes specified above, contact your service representative. *2 For details about how to load custom size paper, contact your service representative. Trays 2 and 3 Paper type and weightPaper sizePaper capacity52.3–256.0 g/m 2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3Paper sizes that can be detected automatically: A3, A4, A5, B4 JIS, B5 JIS , 8 1 / 2 × 11, 13 × 19, SRA3 A4, B5 JIS, 11 × 17, 8 1 / 2 × 14 , 8 1 / 2 × 11, 7 1 / 4 × 10 1 / 2 , 5 1 / 2 × 8 1 / 2, 12 × 18 , 13 × 19 550 sheetsRecommended Paper Sizes and Types 147
Paper type and weightPaper sizePaper capacity52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3Select the paper size using the Tray Paper Settings menu: A5, 11 × 17, 8 1 / 2 × 14, 8 1 / 2 × 13 , 8 1 / 2 × 11, 8 1 / 4 × 14 , 8 1 / 4 × 13, 8 × 13, 7 1 / 4 × 10 1 / 2 , 5 1 / 2 × 8 1 / 2 , 8K , 16K, 12 × 18, 11 × 15 , 11 × 14, 10 × 15, 10 × 14 , 13 × 19 1 / 5, 12 3 / 5 × 19 1 / 5 , 12 3 / 5 × 18 1 / 2, 13 × 18 , SRA4 A3, A4, A5, B4 JIS, B5 JIS , 8 1 / 2 × 13, 8 1 / 4 × 14, 8 1 / 4 × 13 , 8 × 13, 7 1 / 4 × 10 1 / 2 , 5 1 / 2 × 8 1 / 2, 8K , 16K, 11 × 15, 11 × 14 , 10 × 15, 10 × 14, 13 × 19 1 / 5 , 12 3 / 5 × 19 1 / 5, 12 3 / 5 × 18 1 / 2 , 13 × 18, SRA3 , SRA4 550 sheets52.3–256.0 g/m 2 (14.0 lb. Bond–141.0 lb. Index) Thin Paper–Thick Paper 3Custom size *1 : Vertical: 139.7–330.2 mm Horizontal: 139.7–487.7 mm Vertical: 5.50–13.00 inches Horizontal: 5.50–19.20 inches 550 sheetsTab stock *2 163.0 g/m 2 (90.0 lb. Index), 199.0 g/m 2 (110.0 lb. Index)A4, 8 1 / 2 × 14, 8 1 / 2 × 11200 sheets9. Adding Paper and Toner 148
Paper type and weightPaper sizePaper capacityEnvelopesSelect the paper size using the Tray Paper Settings menu: C5 Env•: 50 sheets • : 25 sheets *1 For details about how to load custom size paper, contact your service representative. *2 The tab sheet holder is required. Bypass tray Paper type and weightPaper sizePaper capacity52.3–300.0 g/m 2 (14.0 lb. Bond–165.0 lb. Index) Thin Paper–Thick Paper 4Paper sizes that can be detected automatically: A3, A4, A5, A6, B4 JIS , B5 JIS, B6 JIS, 13 × 19 , SRA3 11 × 17, 8 1 / 2 × 11, 5 1 / 2 × 8 1 / 2 , 12 × 18, 13 × 19 , SRA3 • 100 sheets • Thick Paper 1: 40 sheets • Thick Paper 2–Thick Paper 3: 20 sheets • Thick Paper 4: 16 sheetsRecommended Paper Sizes and Types 149
Paper type and weightPaper sizePaper capacity52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) Thin Paper–Thick Paper 4*1 11 × 17, 8 1 / 2 × 14, 8 1 / 2 × 13 , 8 1 / 2 × 11, 8 1 / 4 × 14 , 8 1 / 4 × 13, 8 × 13, 7 1 / 4 × 10 1 / 2 , 5 1 / 2 × 8 1 / 2, 12 × 18 , 11 × 15, 11 × 14 , 10 × 15, 10 × 14, 13 × 19 1 / 5 , 12 3 / 5 × 19 1 / 5, 12 3 / 5 × 18 1 / 2 , 13 × 18, SRA4 A3, A4, A5, A6, B4 JIS , B5 JIS, B6 JIS, 8 1 / 2 × 14 , 8 1 / 2 × 13, 8 1 / 4 × 14 , 8 1 / 4 × 13, 8 × 13, 7 1 / 4 × 10 1 / 2 , 11 × 15 , 11 × 14, 10 × 15 , 10 × 14, 13 × 19 1 / 5, 12 3 / 5 × 19 1 / 5 , 12 3 / 5 × 18 1 / 2 , 13 × 18, SRA4 • 100 sheets • Thick Paper 1: 40 sheets • Thick Paper 2–Thick Paper 3: 20 sheets • Thick Paper 4: 16 sheets52.3–300.0 g/m 2 (14.0 lb. Bond–165.0 lb. Index) Thin Paper–Thick Paper 4Custom size *2 : Vertical: 90.0–330.2 mm Horizontal: 139.7–487.7 mm Vertical: 3.55–13.00 inches Horizontal: 5.50–19.20 inches • 100 sheets • Thick Paper 1: 40 sheets • Thick Paper 2–Thick Paper 3: 20 sheets • Thick Paper 4: 16 sheetsTranslucent paperA3, A4, B4 JIS, B5 JIS50 sheetsOHP transparenciesA4, 81 / 2 × 1150 sheetsLabel paper (adhesive labels)A4, B4 JIS1 sheet9. Adding Paper and Toner 150