Philips LaserMFD 6080 User Manual

							LFF6080
- 5 -
1 - Security - Software use license - Environment - Licence
Environment
The preservation of the environment is of importance to the manufacturer. The manufacturer wishes to service the 
installations with respect to the environment and has chosen to integrate the environmental performance in the whole 
lifecycle of its products, throughout manufacturing, release, use and disposal.
The packaging
The (green point) logo indicates that a contribution is given to an approved national organization to improve 
the packaging salvage and recycling infrastructures.
To make recycling easier, follow local rules and regulations concerning sorting and disposal of such waste.
Batteries and rechargeable batteries
If your product contains batteries or rechargeable batteries, these shall be disposed of at the designated 
collecting centers.
The product
The crossed bin symbol on the product indicates that it belongs to the electric and electronic equipment 
family.
Therefore, according to European regulations you are requested to dispose of it at the selected collection 
areas:
- to distribution centers in case of equivalent equipment purchase,
- to the available local collecting centers (dump, selective collection, etc.).
In doing so, you will participate in the Waste of Electric and Electronic Equipment reuse and development scheme 
which will help prevent potential effects on the environment and human health.
The purpose of the International ENERGY STAR
® Program is to promote the development 
and popularization of energy-efficient office equipment.
As an ENERGY STAR
® Partner, Sagem Communications has determined that this product 
meets the ENERGY STAR
® guidelines for energy efficiency.
Your machine will be delivered with the timer for switching to Power Save Mode from the last 
copy/print out, set at 5 or 15 minutes, depending on the model. A more detailed description of 
this feature can be found in the Machine Setup Section of this guide.
Downloaded From ManualsPrinter.com Manuals 
						

							LFF6080
- 6 -
1 - Security - Software use license - Environment - Licence
Software use license
CAREFULLY READ ALL THE TERMS AND CONDITIONS OF THE PRESENT LICENSE BEFORE OPENING THE 
SEALED ENVELOPE CONTAINING THE SOFTWARE. OPENING THIS ENVELOPE INDICATES THAT YOU 
ACCEPT THESE TERMS AND CONDITIONS.
In case you should not accept the terms of this license, the CD-ROM packaging should be returned to the retailer 
unopened, along with the other components of the product. The purchase price of this product will be refunded. No 
refunds will be made for products if the CD-ROM packaging have been opened, if components are missing or if the 
reimbursement request is made after ten (10) days from the purchase date, your receipt is the proof of purchase. 
Definition
The Software designates programs and associated documentation. 
License
- This license allows you to use this Software on personal computers on a local network. You only have permission to 
use this Software to print on one multifunction machine; you can not lend the Software or authorize anyone to use it.
- You are allowed to make a back up copy.
- This license is non-exclusive and non-transferable.
Property
The manufacturer or its providers hold the Software property right. You only become the owner of the CD-ROM. You 
shall not modify, adapt, decompile, translate, create any derived piece, rent or sell the Software or the documentation. 
Any rights not explicitly approved are reserved by the manufacturer or its providers.
Duration
This license remains valid until cancelled. You can cancel it by destroying the program and the documentation as well 
as any other copies of them. This license will automatically be canceled in case you do not respect the terms of this 
license. If the license is rendered invalid, you agree to destroy all copies of the program and the associate 
documentation.
Warranty
The Software is provided as is with no warranties what so ever, whether expressed or implied, including without 
limitation, any warranties of merchantability or fitness for a particular purpose; all the risks concerning the results and 
performance of this Software are assumed by the buyer. In case the program should appear defective, all the repair 
and service expenses will be covered by the buyer.
Nevertheless, the license holder benefits from the following warranty: we guarantee that the CD-ROM on which the 
Software is recorded is free from hardware or manufacturing faults if used in normal conditions, the guarantee is valid 
for ninety (90) days from the delivery date, the copy of the receipt being the proof of purchase. In case of a CD-ROM 
fault that due to accident or misuse, the CD-ROM will not be replaced as per the warranty.
Responsibility
If the CD-ROM is not working properly, send it to the retailer together with a copy of the receipt. It is the retailers sole 
responsibility to replace the CD-ROM. Nobody, not even the manufacturer who is involved in the creation, realization, 
merchantability and delivery of this program would be responsible for direct, indirect or immaterial damages, such as, 
but not limited to, loss of information, loss of time, execution loss, loss of revenue, loss of customers, due to the use or 
inability to use the program.
Development
With a constant concern for improvement, the manufacturer reserves the right to modify the Software specifications 
without any notice. In case of modification, your user right does not give you access to free updates.
Downloaded From ManualsPrinter.com Manuals 
						

							LFF6080
- 7 -
1 - Security - Software use license - Environment - Licence
Applicable law
This license is under the French law. Any dispute following the interpretation or execution of this license will be 
submitted to the Paris Court.
Given the continuous technology development, the manufacturer reserves the right to modify the technical 
specifications indicated for this product, at any time, without prior notice, and/or to stop manufacturing of the product. 
All the names of the products and brands that could be trademarks registered by their respective owners are 
recognized in the present document.
Registered trademarks
Given the technical evolution, Sagem Communications reserves the right to modify the technical specifications of this 
product and/or to stop its manufacturing at any time and without notice. Companion Suite Pro is a registered trademark 
of Sagem Communications.
PCL® is a registered trademark of the Hewlett-Packard Company.
PostScript® is a registered trademark of Adobe Systems Incorporated.
Adobe® and the Adobe® products referred to here are registered trademarks of Adobe Systems Incorporated.
PaperPort11SE is a registered trademark of ScanSoft.
Microsoft® Windows 2000®, Microsoft® Windows Server 2003®, Microsoft® Windows XP®, Microsoft® Windows 
Vista® and any other Microsoft® product referred to here are registered trademarks of Microsoft Corporation registered 
and/or used in the United States and/or in other countries.
All the other brands or products referred to as examples or in order to give additional information are registered 
trademarks of their respective owners.
The informations contents of this user manual are subject to change without notice. 
Prohibited reproductions
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
- bank notes;
- checks;
- bonds;
- stock certificates;
- bank drafts;
- passports;
- drivers licenses.
The preceding list is meant as a guide only and is not inclusive. If you have any questions concerning the legality of 
copying or printing certain items, consult with your legal advisor.
Downloaded From ManualsPrinter.com Manuals 
						

							LFF6080
- 8 -
2 - Installation
Installation
Location conditions
By choosing an appropriate location, you preserve the longevity of the machine. Check that the selected location has 
the following characteristics:
- Choose a well ventilated location.
- Make sure not to obstruct the ventilation grids located on the left and right sides of the device. During the 
installation, make sure to place the machine thirty centimeters away from the surrounding objects so all the lids 
can be easily opened. 
- Make sure that this location does not present any ammonia nor any other organic gasses emission hazard.
- The ground outlet (refer to the security notices presented in the Security chapter) to which you plan to connect 
the machine must be located close to this one and have an easy access.
-Make sure that the machine is not directly exposed to sun light.
- Make sure not to place the machine in an area exposed to an air flow generated by an air conditioning, heating or 
ventilation system, nor in an area subject to large temperature or humidity variations. 
- Choose a solid and horizontal surface on which the machine will not be exposed to intense vibrations.
-Keep the machine away from any object that could obstruct its ventilation ports.
- Do not place the machine close to hangings or any other flammable objects.
- Choose a location where splashes of the water and other liquids are limited.
- Make sure that this location is dry, clean and dust free.
Cautions of use
Take into account the important precautions below when using the machine.
Running environment:
- Temperature: 10 °C to 27 °C [50 °F to 80.6 °F] with an ambient humidity included between 15 to 80% (up to 32°C 
[89.6 °F] with an ambient humidity included between 15 to 54%).
Terminal:
The section below describes the precautions to be taken when using the machine:
- Never turn the machine off and never open the lids while printing.
- Never use gas or flammable liquids, or objects generating magnetic field close to the machine.
- When you unplug the power cord, always hold the connector without pulling the cord. A damaged cord presents 
a potential fire hazard or an electric shock hazard.
- Never touch the power cord with wet hands. You risk getting an electric shock.
- Always unplug the power cord before moving the machine. Otherwise, you could risk having the cord damaged 
and create a fire hazard or an electric shock hazard.
- Always unplug the power cord when you plan not to use the machine for a long period of time.
- Never put objects on the power cord, never pull it and never fold it. This could cause a fire hazard or an electric 
shock hazard.
- Always make sure that the machine is not sitting on the power cord or any other electric device communication 
cables. Make sure also that neither cord nor cable is introduced to the machine inner mechanism. This would 
expose you to a machine malfunction risk or to a fire hazard.
- Make sure that the printer is unplugged from the power outlet before connecting or disconnecting an interface 
cable to the printer (use a shielded interface cable).
- Never try to remove any fixed pane or hood. The machine contains high voltage circuits. Any contact with these 
circuits can cause an electric shock risk.
- Never try to modify the machine. This could cause a fire hazard or an electric shock hazard.
- Always make sure that paper clips, staples or other small metallic items do not get inside the machine via the 
ventilation ports or other ports. Such items create fire hazards or electric shock hazards.
- Prevent water and any other liquid from spilling on the machine or near to it. Any contact of the machine with water 
or liquid can cause a fire hazard or an electric shock hazard.
Downloaded From ManualsPrinter.com Manuals 
						

							LFF6080
- 9 -
2 - Installation
- If liquid or metallic item gets accidentally inside the machine, turn it off immediately, unplug the power cord and 
contact your retailer. Otherwise, you will face a fire hazard or an electric shock hazard.
- In case of heat, smoke, unusual smell or abnormal noise emissions, turn the machine off, unplug the power cord 
immediately and contact your retailer. Otherwise, you will face a fire hazard or an electric shock hazard.
- Avoid using the machine during an electric storm, this can cause an electric shock hazard due to lightning.
- Never move the terminal during printing.
- Always lift the terminal when you wish to move it.
Safety information
When using your product, the following safety precautions should always be followed.
Safety During Operation
In this information slip, the following symbols are used:
 WARNING
- Connect the power cord directly into a wall outlet and never use an extension cord.
- Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or 
otherwise damaged.
- To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or screws other than 
those specified in the Operating instructions.
- Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the following 
conditions exists:
• You spill something into the product.
• You suspect that your product needs service or repair.
• Your product’s cover has been damaged.
- Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open flame.
- Disposal can take place at our authorised dealer or at appropriate collection sites.
- Dispose of the used toner cartridge (or bottle) in accordance with the local regulation.
 CAUTION
- Protect the product from dampness or wet weather, such as rain, snow, and so on.
- Unplug the power cord from the wall outlet before you move the product. While moving the product, you should 
take care that the power cord will not be damaged under the product.
- When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).
- Do not allow paper clips, staples, or other small metallic objects to fall inside the product.
- Keep toner (used or unused), toner cartridge (or bottle), ink (used or unused) or ink cartridge out of reach of 
children.Make sure to place the machine in well ventilated premises. When in operation, the printer generates 
a small amount of ozone. An unpleasant smell can come from the printer if it is used intensively in 
poorly ventilated premises. For a secure use, make sure you place the machine in well ventilated 
premises.
WARNING:Indicates a potentially hazardous situation which, if instructions are not followed, could 
result in death or serious injury.
CAUTION:Indicates a potentially hazardous situation which, if instructions are not followed, may result in 
minor or moderate injury or damage to property.
Downloaded From ManualsPrinter.com Manuals 
						

							LFF6080
- 10 -
2 - Installation
- Be careful not to cut yourself on any sharp edges when you reach inside the product to remove misfed sheets of 
paper or masters.
- For environmental reasons, do not dispose of the product or expended supply wastes at household waste 
collection point. Disposal can take place at our authorised dealer or at appropriate collection sites.
- Our products are engineered to meet the high standards of quality and functionality, and we recommend that you 
only use the expendable supplies available at an authorised dealer.
Power Supply
The socket-outlet shall be installed near the product and shall be easily accessible.
For Fax or Telephone
- Do not use this product near water, for example near bath tub, wash bowl, kitchen sink or laundry tub, in a wet 
basement or near a swimming pool.
- Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of an 
electric shock from lightning.
- Do not use a telephone in the vicinity of a gas leak to report the leak.
Paper recommendations
Loading paper in the main unit tray
• Insert paper with the face down, and adjust paper guides to the paper format to avoid feed failure, skewing, and 
paper jams.
• Amount of loaded paper must not exceed the loading mark. If the loading mark is exceeded, this may cause feed 
failure, skewing, and paper jams.
• Adding paper in the pile must be avoided because it may cause double feeding.
• When withdrawing the cassette from the main unit, always support it with both hands to avoid dropping it.
• If you use paper already printed by your machine or another printer, the printing quality may not be optimal.
Handling of paper
• Curling must be corrected before printing.
• Curls must not exceed 10 mm.
• Care must be taken with storage to prevent feed faults and image defects due to leaving the paper in conditions of 
high humidity.
Humidity control
• Paper which has become damp, or paper which has been left unused for a very long time, must not be used.
• After opening the paper, it must be kept in a plastic bag.
• Paper with waved ends, paper which is creased, paper with crumples, and any other non-normal paper must not 
be used.
Handling the unit
Operator shocks
During printing, shocks must not be applied to the paper feed cassette, tray, cover, and other parts of the machine.
Moving the unit
When moving the unit on a desk, it must be lifted, and not dragged.
Handling the Toner Cartridge
• Must not be stood on the side, or held upside down.
• Must not be shaken strongly.
Downloaded From ManualsPrinter.com Manuals 
						

							LFF6080
- 11 -
2 - Installation
Rules for use symbols
 WARNING
Indicates important safety notes.
Ignoring these notes could result in serious injury or death. Be sure to read these notes. They can be found in the Safety 
information section of this manual.
 CAUTION
Indicates important safety notes.
Ignoring these notes could result in moderate or minor injury, or damage to the machine or to property. Be sure to read 
these notes. They can be found in the Safety information section of this manual.
 Important
Indicates points to pay attention to when using the machine, and explanations of likely causes of paper misfeeds, 
damage to originals, or loss of data. Be sure to read these explanations.
 Note
Indicates supplementary explanations of the machine’s functions, and instructions on resolving user errors.
Downloaded From ManualsPrinter.com Manuals 
						

							LFF6080
- 12 -
2 - Installation
Terminal description
Front and Back sides
1. Control panel
2. Document feeder
3. Paper jam cover
4. Power supply cord connection
5. On/Off switch
6. LINE socket - telephone cable connection
7. EXT. socket - connection for external telephone devices
8. Slave USB connection (for PC)
9. LAN connection10. Master USB connection (USB key)
11. Manual paper feed setup guides
12. Manual input tray
13. Paper tray
14. Cartridge access cover
15. Fold-down stopper for paper delivery
16. Paper output
17. Smart card insertion point
Downloaded From ManualsPrinter.com Manuals 
						

							LFF6080
- 13 -
2 - Installation
Command panel
Accessing terminal menus
All terminal functions and settings are available via the menu and are associated to a specific menu command.  
For example, the menu command 51 launches the printing of the functions list (the functions list stores the list of all 
terminal menus, sub-menus and their identification number). 
Two methods are available to access menu items: the step by step method or the shortcut method.
To print the functions list with the Step by step method:
1Press .
2Use the  or  button to browse the menu and select 5 - P
RINT. Confirm with OK.
3Use the  or  button to browse the menu P
RINT and select 51-FUNCTIONS LIST. Confirm with OK.
To print the functions list with the shortcut method:
1Press .
2Enter 51 with the numerical keypad to directly print the functions list.
1. Screen.
2. Digital keypad.
3. Alphabetical keypad.
4. Key 
Í: deletes the character to the left of the cursor.
5. Key  : input or line feed.
6. Key  : access to special characters.
7. Key 
: Shift.
8. Key  : document analysis to the PC or a media 
(USB key).
9. Key  : local copy.
10. Key  : stops the current PC print job.
11. Key  : sending of an SMS (Short Message Service).
12. Key  : sending of a fax.
13. Key  : access to directory and quick dial numbers.
14. Key 
: line manual connection, listen for tone during 
fax sending.
15. Key  : multiple contact sending (fax, e-mail or SMS).16. Key : Validation.
17. Key 
OK: confirms the displayed selection.
18. Key 
: menu access and navigation down the menus.
19. Key 
C: back to the previous menu and input correction.
20. Key 
: navigation up the menus.
21. Key  : stops the current operation.
22. Key  : sets up the activation delay and toner save in
copy mode.
23. Key  : access to print menu (print functions list,
machine settings, etc.).
24. Key  : analysis resolution setup.
25. Key  : contrast setup.
26. Icon   : resolution Copy: 
Quality Text / Fax: SFine.
27. Icon  : resolution 
Photo.
28. Icon  : resolution Copy: 
Text / Fax: Fine.
29. Icon  : colour mode.
30. Icon  : activity on the telephone line.
31. Icon  : Fax mode.
32. Icon  : external answering machine mode.
Downloaded From ManualsPrinter.com Manuals 
						

							LFF6080
- 14 -
2 - Installation
Packaging contents
The packaging contains the items listed below:
Multifunction device
1 toner cartridge
1 Installation guide 
1 PC installation CD ROM and 1 Scan and Print 
drivers CD ROM for Mac/Linux
1 power cord
1 telephone cord 
Device installation
1Unpack the device.
2Install the device respecting the security notices 
stated at the beginning of this booklet.
3Remove all stickers from the machine.
4Remove the plastic protection film from the screen.
Installing the document feeder
1Secure the document feeder by fitting the two clips 
(B) in the notches (A) provided for this purpose.
Feed cassette paper insertion
Your device accepts a number of formats and types of 
papers (refer to the paragraph Specifications, page 91).
1Remove the paper feed cassette completely.
ImportantBefore inserting paper, refer to the 
paragraph Paper 
recommendations, page 10.
ImportantYou can use paper weighing 
between 60 and 105 g/m2.
Downloaded From ManualsPrinter.com Manuals