Panasonic Wifi Phone For Skype Kx Wp1050 Operating Instructions

							Useful Information
For assistance, please visit http://www.panasonic.com/help221
Handset Indicator:The handset does not 
ring.LThe ringer volume is turned off. Adjust the volume 
(page 86).
LThe silent mode is on. Change the silent mode to off 
(page 71).
LCheck your Skype online status. If your Skype online 
status is “Do not disturb”, the handset does not ring. 
Change your Skype online status (page 103).
I cannot make a Skype-
to-Skype call.LCheck that Skype name you are making a call is 
correct.
I cannot make a 
SkypeOut call.LEnter the phone number including country code (page 
84).
LCheck your Skype credit (page 131).
I cannot send a 
voicemail.LCheck your Skype Voicemail subscription (page 131).
I cannot record my 
greeting.LCheck your Skype Voicemail subscription (page 131).
I cannot receive a call.LCheck your Skype online status. If your are using 
“Offline”, you cannot receive a call. Change your Skype 
online status (page 103).
The diverting calls do not 
work.LCheck that the number or Skype name you are 
forwarding to is entered correctly. 
LCheck your Skype credit if you are forwarding to the 
number (page 131). 
ProblemCause/Solution
Charge Indicator is 
flashing in red, except for 
when the handset is 
receiving calls or is being 
located by the base unit.LBattery or charging error occurred. 
Follow the instructions on the handset display if the 
error message appears. If the message does not 
appear, check the battery or charge cable connection.
ProblemCause/Solution
WP1050.book  Page 221  Wednesday, November 22, 2006  9:24 AM 
						

							Useful Information
222For assistance, please visit http://www.panasonic.com/help
Updating Firmware (Handset):
Handset locator:
ProblemCause/Solution
During the handset 
downloads the Panasonic 
firmware, “Cannot display 
the webpage” is 
displayed on the web 
browser.LThe network connection between your computer and 
the handset is disconnected. 
LTurn off the handset. Try again to update the Panasonic 
firmware.
ProblemCause/Solution
I cannot locate the 
handset by using the 
handset locator.LThe handset is out of range.
LThe handset connects other wireless device.
LThe handset is in use. Try again later.
LThe handset has not been registered to the base unit.
Register the handset (page 133).
WP1050.book  Page 222  Wednesday, November 22, 2006  9:24 AM 
						

							Useful Information
For assistance, please visit http://www.panasonic.com/help223
FCC and other information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation. 
Privacy of communications may not be ensured when using this phone.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this device.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Warning:
LThis product complies with FCC radiation exposure limits set forth for an uncontrolled 
environment.
LTo comply with FCC RF exposure requirements, the base unit must be installed and 
operated 20 cm (8 inches) or more between the base unit and all person’s body 
(excluding extremities of hands, wrists and feet).
LThis product may not be collocated or operated in conjunction with any other antenna or 
transmitter.
WP1050.book  Page 223  Wednesday, November 22, 2006  9:24 AM 
						

							Useful Information
224For assistance, please visit http://www.panasonic.com/help
LFor body-worn operation, the handset must be used only with a non-metallic accessory. 
Use of other accessories may not ensure compliance with FCC RF exposure 
requirements.
Responsible party:
Panasonic Corporation of North America
One Panasonic Way,
Secaucus, New Jersey 07094
Phone number: 1-800-211-PANA (1-800-211-7262)
FCC Warning:
To ensure compliance with FCC emissions limits, use only the included charge cable
with the ferrite core when connecting the handset to the base unit.
WP1050.book  Page 224  Wednesday, November 22, 2006  9:24 AM 
						

							Useful Information
For assistance, please visit http://www.panasonic.com/help225
Industry Canada (IC) and other information
The term “IC:” before the radio certification number only signifies that Industry Canada 
radio technical specifications were met.
Notice:
Operation is subject to the following two conditions: (1) this device may not cause 
interference, and (2) this device must accept any interference, including interference that 
may cause undesired operation of the device.
Privacy of communications may not be ensured when using this phone.
RF Exposure Warning:
LThis product complies with IC radiation exposure limits set forth for an uncontrolled 
environment.
LTo comply with IC RF exposure requirements, the base unit must be installed and 
operated 20 cm (8 inches) or more between base unit and all person’s body (excluding 
extremities of hands, wrists and feet).
LThis product may not be collocated or operated in conjunction with any other antenna or 
transmitter.
LFor body-worn operation, the handset must be used only with a non-metallic accessory. 
Use of other accessories may not ensure compliance with IC RF exposure 
requirements.
Environment:
Do not install the unit where the temperature is less than 0 °C (+32 °F) or greater than +40 
°C (+104 °F). Allow 10 cm (4 inches) clearance around the unit for proper ventilation. 
Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. When 
you leave the unit unused for a long period of time, disconnect the AC adaptor from the 
outlet.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this device.
No responsibility will be taken by our company with respect to consequences resulting 
from the inappropriate use, damage or both of the unit.
WP1050.book  Page 225  Wednesday, November 22, 2006  9:24 AM 
						

							Useful Information
226For assistance, please visit http://www.panasonic.com/help
Règles d’Industrie Canada et autres renseignements
L’acronyme « IC » placé devant le numéro d’homologation indique seulement que 
l’appareil satisfait aux spécifications de Industrie Canada.
Avis:
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes:
(1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à 
accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de 
compromettre le fonctionnement du dispositif.
Les communications effectuées au moyen de cet appareil ne sont pas nécessairement 
protégées des indiscrétions.
Avertissement de risque d’exposition au rayonnement radiofréquence:
LCe produit est conforme aux normes d’Industrie Canada concernant les limites 
d’exposition au rayonnement radiofréquence en milieu non contrôlé.
LPour assurer la conformité aux exigences de IC quant à l’exposition au rayonnement 
RF, le poste de base doit être installé et opéré à une distance d’au moins 20 cm (8 
pouces) de toute personne (à l’exclusion des extrémités des mains, des poignets et des 
pieds).
L Ce produit ne doit être installé ni opéré de concert avec aucune autre antenne ni aucun 
autre émetteur.
LPour les appareils portés sur soi, le combiné doit être utilisé seulement avec un 
accessoire non métallique. L’utilisation d’autres accessoires peut ne pas assurer la 
conformité aux exigences de IC quant à l’exposition au rayonnement RF.
Conditions ambiantes:
Ne pas installer l’appareil dans un endroit où la température est inférieure à 0 °C (+32 °F) 
ou supérieure à +40 °C (+104 °F).
Prévoir un jeu d’au moins 10 cm (4 po) autour de l’appareil en vue d’assurer une aération 
adéquate. Éviter l’exposition à la fumée, la poussière, la vibration, les chocs et aux rayons 
solaires directs.
Entretien de routine:
Essuyer l’appareil avec un linge doux. Ne jamais utiliser de benzène, solvant ou toute 
poudre abrasive.
S’il est prévu que l’appareil ne sera pas utilisé pendant une période prolongée, 
débrancher l’adaptateur secteur.
WP1050.book  Page 226  Wednesday, November 22, 2006  9:24 AM 
						

							Useful Information
For assistance, please visit http://www.panasonic.com/help227
MISE EN GARDE:
Toute modification non expressément approuvée par la partie responsable de la 
conformité de l’appareil pourrait entraîner la révocation du privilège d’utiliser l’appareil.
Notre compagnie n’assume aucune responsabilité quant aux conséquences résultant 
de l’utilisation de l’appareil ou de tout dommage subi par l’appareil.
WP1050.book  Page 227  Wednesday, November 22, 2006  9:24 AM 
						

							Useful Information
228For assistance, please visit http://www.panasonic.com/help
For European Union (EU)
Declaration of Conformity:
Panasonic Communications Co., Ltd. declares that this equipment is in compliance with 
the essential requirements and other relevant provisions of Radio & Telecommunications
Terminal Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual 
are available for download by visiting:
http://www.doc.panasonic.de
Contact:
Panasonic Services Europe
a Division of Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Important Safety Information:
Use only the included Panasonic AC adaptor (model No. PQWEWP1050).
English This 2.4 GHz Wireless LAN equipment is intended for use in the following 
countries in the EU: the United Kingdom, Germany, and France.
French Cet équipement LAN sans fil de 2,4 GHz a été conçu pour être utilisé dans 
les pays suivants de l’Union Européenne: Royaume-Uni, Allemagne, et 
France.
German Dieses Zubehör für die Einrichtung eines 2,4-GHz-Wireless LAN ist für die 
Verwendung in folgenden EU-Ländern vorgesehen: Großbritannien (UK), 
Deutschland, und Frankreich.
WP1050.book  Page 228  Wednesday, November 22, 2006  9:24 AM 
						

							Useful Information
For assistance, please visit http://www.panasonic.com/help229
Information on Disposal for Users of Waste Electrical & Electronic 
Equipment (private households)
This symbol on the products and/or accompanying documents means that 
used electrical and electronic products should not be mixed with general 
household waste.
For proper treatment, recovery and recycling, please take these products to 
designated collection points, where they will be accepted on a free of charge 
basis. Alternatively, in some countries you may be able to return your 
products to your local retailer upon the purchase of an equivalent new 
product.
Disposing of this product correctly will help to save valuable resources and prevent any 
potential negative effects on human health and the environment which could otherwise 
arise from inappropriate waste handling. Please contact your local authority for further 
details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with 
national legislation.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your dealer or 
supplier for further information.
Information on Disposal in other Countries outside the European Union:
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask 
for the correct method of disposal.
WP1050.book  Page 229  Wednesday, November 22, 2006  9:24 AM 
						

							Useful Information
230For assistance, please visit http://www.panasonic.com/help
Specifications
Base unit:
Router featureWAN connection mode: DHCP, PPPoE, Static
DHCP server: Yes (max. 5 clients, including 1 
for handset)
DNS relay (DNS Proxy): Yes
Easy Security:
– Transmission/reception of 
Packets with private IP 
addresses via WAN interface
– Stateful Packet Inspection
–  Attack Detection
IP packet filtering: Yes (max. 20)
UPnP: Internet Gateway Device (IGD)
Address translation: IP masquerade, port forwarding 
(max. 10), DMZ
AP (Bridge) featureConnection mode: DHCP, Static
UPnP: Basic Device
Network Interface 
featureWAN: 10Base-T/100Base-TX Ethernet 
RJ-45 connector x 1
LAN: 10Base-T/100Base-TX Ethernet 
RJ-45 connector x 1
Wireless: IEEE 802.11b, IEEE 802.11b/g
WP1050.book  Page 230  Wednesday, November 22, 2006  9:24 AM