Panasonic Wifi Phone For Skype Kx Wp1050 Operating Instructions

							Services
For assistance, please visit http://www.panasonic.com/help131
Service information
You can view information about the following optional services by Skype: Skype credit, 
SkypeIn and Skype Voicemail.
Note:
LSkypeIn numbers are regular phone numbers sold on a subscription basis. If your 
friends who are not using Skype want to call you, they can call your SkypeIn number and 
you receive the call in Skype.
If you buy a SkypeIn number, you get a free Skype Voicemail subscription along with it.
LTo purchase Skype credit, Skype Voicemail or SkypeIn with Skype Voicemail, please 
visit: 
http://www.skype.com/
Viewing the service information
1{Menu} (middle soft key)
2“Services” i {Select}
3Select the desired item. i {Select}
4If you select “Skype credit”, view the information. i Press {V} to scroll down for 
more information, if necessary.
If you select “SkypeIn”, select the desired number. i {Select} i View the 
information.
If you select “Voicemail”, view the information.
If you subscribe to only 1 SkypeIn number, the number is displayed. i {Select} i 
View the expiration date of the SkypeIn number. Skype creditView the remaining Skype credit available and the 
expiration date.
SkypeInView the list of the SkypeIn numbers you subscribe to.
VoicemailView the expiration date of the Skype Voicemail service.
WP1050.book  Page 131  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Locator and Registration
132For assistance, please visit http://www.panasonic.com/help
Locating the handset
You can locate the misplaced handset by paging it from the base unit.
1Base unit:
Press the LOCATOR button to page the handset.
LThe LOCATOR indicator on the base unit lights up.
LThe handset beeps for 1 minute, and the display, keypad and ringer indicator light up.
2Base unit:
To stop paging, press the LOCATOR button.
OR
Handset:
To stop paging, press any key except {CONTACTS}, navigator key and middle soft 
key.
Note:
LThe base unit only locates the registered handset.
LWhen the wireless connection between the handset and the base unit is not established, 
locating the handset is not available.
LOCATOR buttonLOCATOR indicator
WP1050.book  Page 132  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Locator and Registration
For assistance, please visit http://www.panasonic.com/help133
Registering the handset
The handset and the base unit are preregistered. If for some reason the handset is not 
registered to the base unit, after you change the base unit’s wireless settings (page 168), 
or after you reset all the handset settings (page 123), register the handset. The handset 
and the base unit need to be closely located during the registration.
1{Menu} (middle soft key)
2“Settings” i {Select}
3“Phone settings” i {Select}
4“Registration” i {Select}
5“HS registration” i {Select}
6Press and hold the LOCATOR button on the base unit for 4 seconds until you see the 
LOCATOR Indicator on the base unit flashing in green. i {OK}
LThe registration starts. The status message changes from “Handset 
registering” to “Handset registered”.
Note:
LIn step 5, select “Information” to view the network name and BSSID (the MAC 
address) information for the base unit. i {Select}
LWhen the handset registration fails, the status message “Handset could not 
register. Please try again.” is displayed. Press {OK}. Try step 6 again.
LYou can register only 1 handset to the base unit. Therefore, if you register another 
handset to the base unit, the previously registered handset cannot be connected to the 
base unit.
LWhile the handset is being registered, the LOCATOR indicator on the base unit flashes.
LOCATOR buttonLOCATOR indicator
WP1050.book  Page 133  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
134For assistance, please visit http://www.panasonic.com/help
Setting the base unit from Top Menu
After the settings in Initialization Setup (page 36) are successfully completed, Top Menu 
will be displayed on the top page each time you log in the base unit.
1Open the Web browser on the computer you connected to the LAN (Ethernet) port on 
the base unit.
2Enter http://192.168.102.1/ (the base unit’s default IP address) or 
http://kxwpa.webpage in the address field of the browser and press the ENTER key. 
You can also double click the KX-WPA102 icon in My Network Places in the Start menu 
when using Windows XP and UPnP is enabled. See “Setting UPnP to display the 
shortcut” on page 209 for details.
LA prompt screen with fields for your user name and password is displayed.
LAfter failure to enter the user name and the password to a prompt screen asking for 
them for 3 times, the base unit does not respond.
WP1050.book  Page 134  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
For assistance, please visit http://www.panasonic.com/help135
3Enter the user name and password you set in Initialization Setup.
LTop Menu is displayed.
1Current mode:Indicate the current selected mode. The mode is 
determined by the position of the Mode selector 
switch (page 200).
2Menu items:
LNetwork Connection: Provide an easy setup for Internet connection 
(page 136). Allow you to create a new profile of 
network connection and modify the existing 
network connection profile (page 137).
LUpdate Firmware: Update the firmware to the latest version (page 
141).
LAdvanced Setup: Allow you to control all features of the base unit 
(page 143).
LHandset  Information: Display the connection status of the handset (page 
195).
1
2
WP1050.book  Page 135  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
136For assistance, please visit http://www.panasonic.com/help
Network Connection
Creating a new Internet connection profile
1Click [Network Connection] on the Top Menu.
LThe current Internet connection settings and information of the wireless connection 
are displayed.
LSee the Network Status page for each of the setting (page 175).
2Click [New Profile] under the New Profile heading.
WP1050.book  Page 136  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
For assistance, please visit http://www.panasonic.com/help137
3Select the connection mode, then click [Next>].
4Configure the connection mode you select in step 3, then click [Next>]. 
LSee “Configuring the Internet connection settings” on page 48 for instructions.
5Confirm the settings you are about to save, then click [Save].
6Click [Restart].
LThe settings that you have just configured are saved as profile No. 1 (HOME mode) 
or No. 2 (HOTEL mode) according to the position of the Mode selector. The profile is 
automatically named “Automatic generation” and saved.
LIf you click [Default Profile], you can revert the WAN side setting back to default 
setting (DHCP).
If you have no specific instructions for the Internet connection from the hotel front 
desk, use [Default Profile] for an easy setup.
LWhen you click [Refresh], the Internet connection status is refreshed.
LWhen PPPoE is selected in the Connection Mode, [PPPoE Connect] and 
[PPPoE Disconnect] are available. You can connect PPPoE by clicking 
[PPPoE Connect] and disconnect PPPoE by clicking [PPPoE Disconnect].
Modifying the existing network connection profile
1Click [Network Connection] on the Top Menu.
2Click [Modify] under the Network Connection heading.
WP1050.book  Page 137  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
138For assistance, please visit http://www.panasonic.com/help
3Select the profile you wish to modify from the pull-down menu under the Select Profile 
heading, then click [Edit].
4Configure the connection mode of the profile you select in step 3, then click [Next>].
LSee “Configuring the Internet connection settings” on page 48 for instructions.
5Confirm the settings you are about to save, then click [Save].
6Click [Restart].
LThe base unit restarts in the connection mode that is registered as HOTEL or HOME 
mode in the profile you have just created. (The position of the Mode selector switch 
determines the connection mode.) However, editing the AP (Bridge) mode profile 
while the Mode selector is switched to “HOTEL” does not restart the base unit with 
the AP (Bridge) mode profile.
Note:
LTo delete a profile
1Select the desired profile from pull-down menu, then click [Delete] in step 3.
2Click [OK] in the confirmation dialog box.
3Click [Restart].
– If you delete the profile you are currently using for HOTEL or HOME mode, the 
profile will be reset to the default setting (DHCP).
WP1050.book  Page 138  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
For assistance, please visit http://www.panasonic.com/help139
Modifying the wireless information
1Click [Network Connection] on the Top Menu.
2Click [Modify] under the Wireless Information heading.
3Configure the wireless connection basic settings, then click [Next>].
4Configure the wireless connection security settings, then click [Save].
SettingDescription
[Mode]LSelect your wireless network mode from the pull-down menu.
LIf you have both 802.11b and 802.11g wireless devices in 
your network, select [802.11b/g]. 
LIf you have only 802.11b wireless devices, select [802.11b].
[Channel]LSelect [Auto] or the desired channel from [1] to [11].
[Network Name 
(SSID)]LEnter your wireless network name (SSID) (1 – 32 
alphanumeric characters) in this data field.
[SSID Broadcast]LEnable or disable the broadcasting of your SSID.
LIf you select [Disable], only wireless devices that know the 
SSID of the base unit can connect to the base unit.
LIf you select [Enable], any wireless device can detect the 
SSID of the base unit.
SettingDescription
[Security Mode]LSelect the desired security mode.
LNo Encryption (Open), WEP, WPA-PSK and WPA2-PSK are 
available for the wireless devices, including the handset. 
Select the desired security mode for your wireless devices 
connected to the base unit. Default is set to WEP.
WEP settings
[Network Key]For WEP 64bit:
LEnter the network key containing 5 alphanumeric characters 
or 10 hexadecimal characters.
For WEP 128bit:
LEnter the network key containing 13 alphanumeric 
characters or 26 hexadecimal characters.
LPress [View] to display the network key.
[Key Index]LSelect [Key 1], [Key 2], [Key 3] or [Key 4] to be used if you 
use WEP. The default is set to [Key 1].
WP1050.book  Page 139  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
140For assistance, please visit http://www.panasonic.com/help
5Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LThe settings under the Network Connection heading display the network information for 
the Internet connection on WAN side. See the Network Status page on page 175 for 
detail.
LThe settings under the Wireless Information heading display the wireless network 
information for the handset and wireless devices connected to the base unit. See the 
Wireless Status page on page 179 for detail.
LIf you click [View], the current network key is displayed. You may need this information 
when you set up your wireless devices.WPA-PSK/WPA2-PSK Settings
[Network Key]LEnter the network key (8 – 63 alphanumeric characters) in 
this data field. 
LPress [View] to display the network key.
[Data Encryption]LSelect the desired data encryption method.
For WPA-PSK
LIf your wireless devices use TKIP, select [TKIP] or 
[TKIP+AES].
LIf your wireless devices use AES, select [TKIP+AES].
For WPA2-PSK
LIf your wireless devices use TKIP, select [TKIP+AES].
LIf your wireless devices use AES, select [AES] or 
[TKIP+AES].
[Session-Key 
renewal interval]LSet the interval for refreshing the encryption key between 30 
and 604800 seconds. 604800 seconds is the equivalent of 
one week. The default is set to 1800.
SettingDescription
WP1050.book  Page 140  Wednesday, November 22, 2006  9:24 AM