Panasonic Wifi Phone For Skype Kx Wp1050 Operating Instructions

							Base Unit Settings
For assistance, please visit http://www.panasonic.com/help181
[Version Information] shows the firmware version and configuration database version.
[Save Status] allows you to save the current status of the base unit to a computer you are 
using.
A status log file can be saved on your computer in a text format.
1Click [Save].
LThe file download confirmation message is displayed.
2Specify the location and enter the file name, then click [Save] in the Save As dialog 
box.Version Information:
1Firmware: Show the firmware version of the base unit.
2Configuration Database: Show the configuration database version of the 
base unit.
12
WP1050.book  Page 181  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
182For assistance, please visit http://www.panasonic.com/help
Maintenance
Password:
This feature allows you to change the user name and password that are required to 
access the base unit.
Important:
LMake a note of the user name and password so that you will not forget them.
LWe recommend that you change the password regularly.
1Click [Advanced Setup] on the Top Menu.
2Click the [Maintenance] tab, then click [Password].
WP1050.book  Page 182  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
For assistance, please visit http://www.panasonic.com/help183
3Configure the settings, then click [Save].
4Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
SettingDescription
[User Name]LThe user name and password can contain 6 to 15 
alphanumeric characters.
LThe following cannot be used: [ ˝ ], [ ´ ], [&], [], [ : ], 
[(space)]
LUser name and password must be different from each other.
LUser name and password are case-sensitive. [Password]
[Retype 
Password]LEnter the password again to verify.
WP1050.book  Page 183  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
184For assistance, please visit http://www.panasonic.com/help
Update Firmware:
This feature allows you to update the firmware of the base unit to the latest version.
To prevent the leaking of customer information, illegal operation of this product, 
interference or involuntary shutdown etc., we recommend you update the firmware 
regularly. For firmware information, visit:
http://panasonic.co.jp/pcc/cs/en/telecom/wi-fi/us_wp1050.htm
Important:
LDo not interrupt the firmware updating process by cutting the power supply until the 
updating is complete and the base unit restarts itself.
1Click [Advanced Setup] on the Top Menu.
2Click the [Maintenance] tab, then click [Update Firmware].
3Check for the latest version by clicking the firmware information URL.
4If the version is updated, download the updated firmware to your computer.
5Enter the file name under the Update Firmware heading.
LYou can also click [Browse...] to select the desired file name from the list.
6Click [Update].
WP1050.book  Page 184  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
For assistance, please visit http://www.panasonic.com/help185
7Click [OK] in the confirmation dialog box.
LThe base unit automatically restarts after the firmware is updated.
WP1050.book  Page 185  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
186For assistance, please visit http://www.panasonic.com/help
Reset to Factory Default:
The base unit settings can be reset to the base unit’s factory default. See page 201 for the 
default settings.
1Click [Advanced Setup] on the Top Menu.
2Click the [Maintenance] tab, then click [Reset to Factory Default].
3Click [Reset to Factory Default] to reset the base unit settings.
LThe confirmation message is displayed.
4Click [OK] in the confirmation dialog box.
LThe base unit begins to restart and the Top Menu is displayed.
Note:
LIn step 4, if the LAN side setting is changed or AP (Bridge) mode is used, the base unit 
restart automatically, but the Top Menu is not displayed automatically.
You need to click to the link shown on the Restarting page to access to the Top Menu.
LYou need to register the handset to the base unit again when you reset the base unit to 
factory default.
See “Registering the handset” on page 133.
WP1050.book  Page 186  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
For assistance, please visit http://www.panasonic.com/help187
Save Settings:
A backup file can be saved on your computer. You can load the base unit settings from the 
backup file on the Load Settings page (page 188).
1Click [Advanced Setup] on the Top Menu.
2Click the [Maintenance] tab, then click [Save Settings].
3Click [Save].
4Specify the location and enter the file name, then click [Save] in the Save As dialog 
box.
Note:
LUser name and password can not be saved.
WP1050.book  Page 187  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
188For assistance, please visit http://www.panasonic.com/help
Load Settings:
The base unit settings can be loaded from a backup file. If you reset the base unit settings 
to factory default, the Load Settings page can load its settings from the backup file.
Note:
LThe backup file contains network settings. When these settings are loaded, all network 
settings except for the user name and password for the base unit are changed as they 
were saved.
1Click [Advanced Setup] on the Top Menu.
2Click the [Maintenance] tab, then click [Load Settings].
3Enter the file name under the Load Settings heading. 
LYou can also click [Browse...] to select the desired backup file name on the Choose 
file dialog box, and click [Open].
4Click [Load].
5Click [Restart].
LThe base unit restarts and the Top Menu is displayed.
WP1050.book  Page 188  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
For assistance, please visit http://www.panasonic.com/help189
Restart:
You can restart the base unit.
1Click [Advanced Setup] on the Top Menu.
2Click the [Maintenance] tab, then click [Restart].
3Click [Restart].
LThe confirmation message is displayed.
4Click [OK] in the confirmation dialog box.
LThe base unit begins to restart and the Top Menu is displayed.
WP1050.book  Page 189  Wednesday, November 22, 2006  9:24 AM 
						

							Base Unit Settings
190For assistance, please visit http://www.panasonic.com/help
Packet Filtering Log:
This feature displays the packet filtering logs that are temporarily saved, and saves the 
logs to your computer. This feature is enabled when [Log Output] in [Packet Filtering 
Setting] (page 165) is set to “ON” and [Log Output] in [Easy Security] (page 160) is set 
to “ON”.
1Click [Advanced Setup] on the Top Menu.
2Click the [Maintenance] tab, then click [Packet Filtering Log].
LPacket filtering logs are displayed.
3Click [Save].
4Specify the location and enter the file name, then click [Save] in the Save As dialog 
box.
Note:
LThe log stores up to 200 most recent events.
WP1050.book  Page 190  Wednesday, November 22, 2006  9:24 AM