Panasonic Wifi Phone For Skype Kx Wp1050 Operating Instructions

							Handset Settings
For assistance, please visit http://www.panasonic.com/help121
9Computer:
Enter the URL displayed on the handset in the address field of your browser and press 
ENTER key.
LYou need to enter both IP address and port number 
(e.g. http://192.168.102.100:8080).
10Computer:
Enter the user name and the password (shown on the handset display) when 
prompted. 
11Computer:
Download the updated firmware to your computer from the firmware information URL.
12Computer:
Enter the file name under the Update Firmware heading.
LYou can also click [Browse...] to select the desired file name from the list.
13Computer:
Click [Update].
WP1050.book  Page 121  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Settings
122For assistance, please visit http://www.panasonic.com/help
14Computer:
Click [OK] in the confirmation dialog box.
LThe handset starts to update. After an update is completed, the handset begins to 
restart.
Note:
LWhen “A new version of firmware is available.” is displayed, skip to step 5.
LIn step 5, the message “You already have the latest software installed.” 
is shown, but a new Panasonic firmware is available from Panasonic firmware site. i 
{Options} i “Update manually” i {Select} i {OK}
LIn step 9, for the safety, the user name and the password is temporarily available. When 
you try to update next time, the user name and the password is changed.
WP1050.book  Page 122  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Settings
For assistance, please visit http://www.panasonic.com/help123
To receive software update notifications:
You can allow the handset to notify you of software updates.
1{Menu} (middle soft key)
2“Settings” i {Select}
3“Advanced” i {Select}
4“Software updates” i {Select}
5Select “Yes” or “No”. i {Select}
Reset
This feature resets all the handset settings or all except the network settings.
1{Menu} (middle soft key)
2“Settings” i {Select}
3“General” i {Select}
4“Reset” i {Select}
5Select “Keep network settings” or “Reset all”. i {Select}
6{Yes}
LThe handset begins to restart after 3 seconds.
Note:
LIf you select “Reset all” in step 5, you need to register the handset to the base unit 
again. See “Registering the handset” on page 133 for details.Keep network 
settingsResets all the handset settings except “Preferred 
networks”, “Auto-connect” and “Network proxy”.
Reset allResets all the handset settings. However, the contacts 
stored centrally on Skype servers will be downloaded 
and displayed on your handset’s contact list when you 
sign in to Skype with the handset.
WP1050.book  Page 123  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Settings
124For assistance, please visit http://www.panasonic.com/help
To n e s
You can change the handset’s ringer type, tone, volume, and other types of tones.
1{Menu} (middle soft key)
2“Settings” i {Select}
3“Tones” i {Select}
4Select the desired setting. i {Select}
5Select the desired item. i {Select} or change the setting by pressing {^} or {V}. i 
{OK}
Note:
LThe preset melodies in this product are used with permission of (C) 2006 Copyrights 
Vision Inc.
LWhen you change the selection on ring tone or ring volume screen, a tone sounds for 
confirmation (Tone does not sound when ringer volume is off, silent mode is on and/or 
your Skype online status is “Do not disturb”.). Ring typeSet the ringer type to “Ringing” or “Ring once”.
Ring toneLSet the desired ringer tone.
LThe ringer tone sounds while receiving a call.
Ring volumeAdjust the ringer volume.
Notification toneLSet the notification tone to “On” or “Off”.
LThe notification tone sounds when a new voicemail 
message or Authorization request is received.
Keypad toneLSet the keypad tone to “On” or “Off”.
LThe keypad tone sounds when you press keys.
Out of service toneLSet the out of service tone to “On” or “Off”.
LThe out of service tone sounds when the handset is 
going to be out of wireless LAN service range for 
making/answering calls or listening/recording 
voicemail messages.
WP1050.book  Page 124  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Settings
For assistance, please visit http://www.panasonic.com/help125
Phone settings
Register the handset
See “Registering the handset” on page 133.
Brightness
This feature adjusts the brightness of the screen.
1{Menu} (middle soft key)
2“Settings” i {Select}
3“Phone settings” i {Select}
4“Brightness” i {Select}
5Press {} to adjust the brightness.
6{OK}
WP1050.book  Page 125  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Settings
126For assistance, please visit http://www.panasonic.com/help
Handset Information
This feature shows device information such as product ID, software/firmware version and 
MAC address.
1{Menu} (middle soft key)
2“Settings” i {Select}
3“Information” i {Select}
WP1050.book  Page 126  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Settings
For assistance, please visit http://www.panasonic.com/help127
Advanced settings
Software update
See “To receive software update notifications” on page 123.
Network proxy
Network proxy allows you to decide whether you want to use proxy servers on the LAN for 
Skype traffic. Setting is required if you are instructed by the Internet service provider to 
enter the specific settings required for the network proxy.
1{Menu} (middle soft key)
2“Settings” i {Select}
3“Advanced” i {Select}
4“Network proxy” i {Select}
5Select the desired item. i {Select}
Proxy typeSelect the proxy server type from “None”, “HTTP/
HTTPS” or “SOCKS5”.
HostEnter the proxy server IP address or name (max.100 
characters) in this data filed if it is specified by your 
Internet service provider or the hotel you are staying in 
in the following way:
“192.168.0.1”
(Do not enter “http://192.168.0.1”)
PortEnter the port number used by the proxy server (value1-
65535) in this data field if it is specified by your Internet 
service provider or the hotel you are staying in.
AuthenticationEnable or disable the proxy authentication which 
requires the user name and password to access the 
Internet.
WP1050.book  Page 127  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Settings
128For assistance, please visit http://www.panasonic.com/help
6Enter the information. i Press {OK} or select the desired item. i {Select}
7{Save}
8{OK}
Note:
LFor text entry, see page 60 for details.
LThe new settings will become effective after restarting the handset.User nameEnter the user name for proxy host authentication 
(max.127 characters) in this data field if it is specified by 
your Internet service provider or the hotel you are 
staying in.
PasswordEnter the password for proxy host authentication 
(max.127 characters) in this data field if it is specified by 
your Internet service provider or the hotel you are 
staying in.
WP1050.book  Page 128  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Settings
For assistance, please visit http://www.panasonic.com/help129
Recovering the handset
When software/firmware of handset is defective, you are required to update a software/
firmware. 
1This error message appears when the handset software/firmware may be defective.
2Press {OK}. 
LThe handset searches for available networks in range.
LIf the networks list is displayed, enter the number to connect to the desired network.
– To view more available networks in range list, press {^} or {V}. 
– To search for available networks, press {Search}.
– To access options, press {Options}.
WP1050.book  Page 129  Wednesday, November 22, 2006  9:24 AM 
						

							Handset Settings
130For assistance, please visit http://www.panasonic.com/help
3After a network connection is completed, follow the same step as software/firmware 
update.
To update the Skype application: Skip to step 6 on page 118.
To update the Panasonic firmware: Skip to step 6 on page 119. 
Note:
Followings are the differences from normal usages:
LYou need to press {^} or {V} to scroll pages.
LYou need to enter the number key to select a network or options.
LYou need to press {Symbol} (left soft key) repeatedly to enter symbol. More networks View more networks.
Add network Set the network settings when you need to connect to a 
secure network that is not registered in your preferred 
networks.
HTTP proxy Set the http proxy server when your must use proxy 
server to connect to the Internet.
WP1050.book  Page 130  Wednesday, November 22, 2006  9:24 AM