Panasonic Uf 885 Users Guide

19
 (see Note 1) 
4(1) Release the hook and remove the Paper
Size Selector.
(2) Rotate the Paper Size Selector until the
appropriate setting marked on the Selector
is facing upward and the wording is upright.
(3) Reinstall the Paper Size Selector.  
5(1) Push the Pressure Plate until it is locked
down.
(2) Load the paper into the Paper Cassette.
Caution:Make sure that the paper is set
under the clips of the Paper
Cassette.  You can load about
500 sheets with standard weight
paper (20 lb. or 75 g/m
2)....

20
Connecting the Telephone Line Cable and Power Cord
Pow e r C ord
Plug one end of the power cord into an ordinary 3 prong AC outlet and the other end into the receptacle on the
rear of the machine.
Warning : This apparatus must be properly grounded through an ordinary 3 prong AC outlet.
Do not break off the earth (ground) prong to fit a 2 prong outlet.
 (see Note 1).
1. Your machine uses little power and you should keep it ON at all times. 
Power Cord (Included)
Telephone Line Cable (Included)...

21
powerS
External Telephone (Optional)
You can connect an additional standard
single line telephone to the machine.
To connect the telephone, break off the
protective tab on the TEL jack.
Attach the cables to
the Hook to prevent
recording paper jam.
Note
Power Switch
After connecting all cables and
Power Cord, turn the power
switch ON.
Connecting the Telephone Line Cable and Power Cord
2 

22
Setting the Dialing Method (Tone or Pulse)
Your machine can operate with either of two dialing methods (Tone or Pulse), depending on the type of telephone
line you are connected to.  If you need to change the dialing method to Tone or Pulse, follow the procedure below.
1
  
2
  
3
     
4for “PULSE”.
    or
for “TONE”.or
5
  
FUNCTION7
S E T  M O D E         ( 1 - 6 )
ENTER NO. OR 
∨ ∧
4SETFAX PARAMETER(01-99)
        NO.=
❚
06SET06 DIALING METHOD
 2:TONE
1
2
06 DIALING METHOD
 1:PULSE
06 DIALING...

23
Adjusting the Volume
You can adjust the monitor and ringer volume on your machine. The built-in speaker enables you to hear the dial
tone, dialing signals, and busy tone. The ringer sounds when your machine receives a call.
Setting the Monitor Volume
Setting the Ringer Volume
 (see Note 1)
1
You will hear the dial tone through the speaker.
2
repeatedly to raise the volume. 
    or
repeatedly to lower the volume.
3
1
Standby
2
repeatedly to raise the volume. 
    or
repeatedly to lower the volume.
3
1....

24
User Parameters
Your facsimile machine has several basic settings (User Parameters) to help you keep records of the documents you
send or receive.  For example, the built-in clock keeps the current date and time, and your LOGO and ID Number
help to identify you when you send or receive documents.
Setting the Date and Time
At standby the display will show the date and time.  Once the standby display is set, it will automatically be
updated.
 (see Note 1)
 (see Note 2)
1
  
2
3
4
Enter the new date and...

25
Setting Your LOGO
When you send a document, your LOGO appears on the top of the copy printed out at the other station.
The LOGO helps to identify you to someone who receives your document.
 (see Note 1)
1
  
2
3
 repeatedly until display shows;
4
Enter your LOGO (max. 25 characters and digits) by using 
the Character keys  (See page 12).
Ex:
If you make a mistake, use   or   to move the cursor
beyond the incorrect character, press   then re-
enter the new character.
If more than 19 characters are...

26
Setting Your Character ID
If the remote machine has a Character ID capabilities, when you are sending or receiving, your Character ID will
appear on the remote machines display and the remote machines Character ID will appear on your display.
 (see Note 1)20
1
  
2
3
 repeatedly until display shows;
4
Enter your Character ID (max. 16 characters and digits)
by using the Character keys  (See page 12).
Ex:
If you make a mistake, use   or   to move the cursor
beyond the incorrect character, press   then...

27
Setting Your ID Number (Fax Telephone Number)
If the remote machine does not have a Character ID but it has an ID Number, when sending or receiving, your ID
Number will appear on the remote machines display and their ID Number will appear on your display.
We suggest you use your facsimile telephone number as your ID number. (max. 20 digits)
 (see Note 1)
 (see Note 2)
1
  
2
3
 repeatedly until display shows;
4
Enter your ID (max. 20 digits) by using the key pad and
.
Ex:
If you make a mistake, use...

28
This page is intentionally left blank.