Panasonic Network Camera Wv Sud638 Operating Instructions

•Advanced VBR : H.264 images are transmitted at the frame rate specified for  “Frame rate* ” while the image
quality is controlled so that the average transmission rate during the period specified for “Control time
period” becomes the bit rate selected for “Max bit rate (per client)*”.
• Default:  Frame rate
Note
•When “Frame rate” or “Advanced VBR” is selected for “Transmission priority”, number of users who
can access the camera may be limited more (may become less than 10).
[Frame rate*]
Select a...

–H.264(4): 512kbps*
* The range of bit rates that can be configured for H.264 bit rates differs depending on the “Transmission
priority” and “Image capture size”.
When “Constant bit rate”, “Frame rate”, “Advanced VBR”, or “Best effort” is selected for
“Transmission priority”
• 160x120 and 160x90: 64kbps - 2048kbps*
• QVGA, 400x300, VGA, 320x180, and 640x360: 64kbps - 4096kbps*
• 800x600: 128kbps* - 4096kbps*
• 1280x960 and 1280x720: 256kbps* - 8192kbps*
• 1920x1080: 512kbps* - 14336kbps*
• 1920x1080...

If using under a network environment with frequent error occurrences, shorten the refresh interval for H.264
to diminish image distortions. However, the refresh interval may be longer than the set value.
0.2s/ 0.25s/ 0.33s/ 0.5s/ 1s/ 2s/ 3s/ 4s/ 5s
• Default:  1s
[Transmission type]
Select the transmission type of H.264 images from the following.
• Unicast port (AUTO):  Up to 14 users can access a single camera concurrently. “Unicast port1(Image)”
and “Unicast port2(Audio)” will automatically be selected...

[Multicast port]*3
Enter the multicast port number (used to transmit images from the camera).
• Available port number:  1024 - 50000 (Only even numbers are available.)
• Default:  37004
Note
•When audio is transmitted from the unit, the port number to be used will be the multicast port number
plus “1000”.
[Multicast TTL/HOPLimit] *3
Enter a value for “Multicast TTL/HOPLimit”.
• Available value:  1-254
• Default:  16
IMPORTANT
•When transmitting an H.264 image via a network, the transmitted image...

8.4  Configure the settings relating to the camera
operations [Cam. Function] Click the [Cam. Function] tab on the “Image/Audio” page. ( ®page 32, page 34)
Configure the settings relating to camera operations.
[Home position]
A preset position ( ®page 71) can be set as the home position.
When a preset position is set as the home position, “H” will be displayed next to the preset position number.
• Default:  Off
Note
•To move the camera to the home position when the power of the camera is turned on,...

10s/ 20s/ 30s/ 1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 60min
• Default:  1min
[HD Extra optical zoom]
Select the HD extra optical zoom setting from the following.
• On (Max X45):  Images can be zoomed in on with the optical zoom (1x - 30x) and the HD extra optical
zoom (higher zoom factors, up to 45x).
• Off (Max X30):  Does not use the HD extra optical zoom.
• Default:  On (Max X45)
About HD extra optical zoom
Among approx. 2.07 megapixel image capture area of the MOS image sensor, the central part...

•When “Direction display” is selected, the direction display is displayed in the position specified in
“OSD” on the [Basic] tab. ( ®page 40)
• When “Direction display” is selected, configure the direction of north in “North point setting” of
“Direction/Angle setting”. ( ®page 84)
[Operation mode display]
When the camera is operating automatically, the operation mode is displayed.
• On:  Displays the operation mode.
• Off:  Does not display the operation mode.
• Default:  OffOperation modeDisplayThe...

8.5  Configure the settings relating to image position
[Image/Position] Click the [Image/Position] tab on the “Image/Audio” page. ( ®page 32, page 34)
When the [Setup>>] button of each setting item is clicked, the detailed settings menu will be displayed in a
newly opened window. The detailed settings can be configured while monitoring images displayed on the
[Image/Position] tab.
The settings relating to image adjust, preset position, auto pan, patrol, auto track, direction/angle, privacy zone,
and VIQS...

[Auto track]
Click the [Setup>>] button to display the setup menu that can configure the settings relating to the auto track
function. The setup menu will be displayed in a newly opened window. ( ®page 78)
[Direction/Angle]
Click the [Setup>>] button to display the setup menu that can configure the settings relating to the direction/
angle setting function. The setup menu will be displayed in a newly opened window. ( ®page 84)
[Privacy zone]
Click the [Setup>>] button to display the setup menu that can...

60Operating Instructions
8 Configure the settings relating to images and audio [Image/Audio]