Panasonic Network Camera Wv Sud638 Operating Instructions

When an Android terminal is used, an MJPEG format image is displayed by the Firefox®
 browser, but a JPEG
format image is displayed by the standard browser.
For further information about compatible devices, refer to our website
(http://security.panasonic.com/support/info/).
IMPORTANT
•When the authentication window is displayed, enter the user name and password.
To enhance the security, change the password periodically. ( ®page 121)
Note
•It is necessary to configure the network settings of the mobile...

2.Click the button of the function that you want to operate.
Pan/Tilt
Preset
Resolution control
AUX control
Focus display
Zoom display
Each function is explained below.
22Operating Instructions
2 Monitor images on a cellular phone/mobile terminalC D
ABE
F          

Pan/Tilt
Press the 
 button to display the buttons used to operate pan/tilt on the screen. The pan/tilt can be
adjusted in each direction with the 
, , , and  buttons.
Preset
Press the 
 button to display the buttons used to select the preset position on the screen. Camera
images are displayed of the registered preset camera directions according to the preset numbers
selected from the buttons.
• Only position numbers 1-4 for the preset positions are displayed.
• Only registered preset positions are...

Resolution control
Press the 
 button to display the buttons used to select the resolution on the screen. The resolution
can be changed by selecting a resolution setting from the buttons.
Images are displayed in the image capture size selected in “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” of
[JPEG] on the [JPEG/H.264] tab.
24Operating Instructions
2 Monitor images on a cellular phone/mobile terminal          

AUX control
Press the 
 button to display the buttons used to operate the AUX output on the screen. The AUX
output terminals can be controlled with the 
 and  buttons.
This function is only displayed when “Terminal 3” is set to “AUX output” on the settings menu.
( ® page 99)
Operating Instructions25
2 Monitor images on a cellular phone/mobile terminal           

Focus display
Press the 
 button to display the buttons used to operate the focus on the screen. The camera’s
focus can be operated with the 
, , and  buttons.
Zoom display
The camera’s zoom can be operated with the 
, , and  buttons.
26Operating Instructions
2 Monitor images on a cellular phone/mobile terminal                       

Note•You can change the image size displayed on the mobile terminal by accessing the following addresses.
– Large display: http://IP address/cam/dl
– Medium display: http://IP address/cam/dm
– Small display: http://IP address/cam/ds
• When the resolution is changed by the resolution control, the displayed resolution changes but the
image size remains the same.
• When the HTTP port number is changed from “80”, enter “http://IP address: (colon) + port number/
cam” *1
 in the address box of the browser....

3   Action at an alarm occurrenceThe alarm action (camera action at an alarm occurrence) will be performed when the following alarms occur.
3.1  Alarm type •Terminal alarm:  When connecting an alarm device such as a sensor to the alarm input terminal of the
camera, the alarm action will be performed when the connected alarm device is activated.
• VMD alarm:  When motion is detected in the set VMD area, the alarm action will be performed.
*VMD stands for “Video Motion Detection”.
• Command alarm : When a...

Notify of alarm occurrences to the designated addresses (Panasonic alarm
protocol notification)
This function is available only when a Panasonic device, such as the network disk recorder, is connected to
the system. When  “On” is selected for  “Panasonic alarm protocol notification ”, the connected Panasonic device
will be notified that the camera is in the alarm state. The settings for Panasonic alarm protocol can be configured
in the Panasonic alarm protocol section of the [Notification] tab of the...

4   Transmit images onto an FTP serverImages can be transmitted to an FTP server. By configuring the following settings, transmission of images
captured at an alarm occurrence or captured at a designated interval to an FTP server will become available.
IMPORTANT
•When using this function, set the user name and the password to access the FTP server to restrict
users who can log into the FTP server.
4.1  Transmit an alarm image at an alarm occurrence
(Alarm image transmission) An alarm image can be...