Panasonic Network Camera Wv Sud638 Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Wv Sud638 Operating Instructions. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 41
–Access indicator – Live indicator • On: All the indicators will light in accordance with the status. • On(Access): Only the live indicator will light when images are viewed. • Off: All the indicators will light off. • Default: On Note •LINK indicator (orange): This indicator will light when communication with the connected device is available. • ACT Indicator (green): This indicator will light when accessing a network. • STATUS indicator (red/orange/green): The live indicator will light or blink...
Page 42
![Page 42
[Alarm status reception port]
When selecting “Real time ” for “Alarm status update mode ”, designate a port number to which the status change
notification is to be sent.
• Available port number: 1 - 65535
• Default: 31004
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Viewer software (nwcv4Ssetup.exe)] - [Automatic installation]
Determine whether or not to install the viewer software from...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-41.png "Page 42
[Alarm status reception port]
When selecting “Real time ” for “Alarm status update mode ”, designate a port number to which the status change
notification is to be sent.
• Available port number: 1 - 65535
• Default: 31004
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Viewer software (nwcv4Ssetup.exe)] - [Automatic installation]
Determine whether or not to install the viewer software from...")
[Alarm status reception port] When selecting “Real time ” for “Alarm status update mode ”, designate a port number to which the status change notification is to be sent. • Available port number: 1 - 65535 • Default: 31004 The following port numbers are unavailable since they are already in use. 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670 [Viewer software (nwcv4Ssetup.exe)] - [Automatic installation] Determine whether or not to install the viewer software from...
Page 43
![Page 43
7.1.1 Configure the washer settings (“Washer control” setup
menu) Select “Washer control” for “Relay output” on the [Basic] tab of the “Basic” page. Click “Washer control >>”.
(Refer to page 42)
[Pulse width]
Enter the pulse width of the washer from 1 second to 60 seconds in 1 second intervals.
Available time setting: 1 to 60
• Default: 5
[Wiper count]
After the time for the pulse width of the wiper has completed, specify the wiper count.
Available number of counts: 0 to 10
• Default: 2
[Close]...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-42.png "Page 43
7.1.1 Configure the washer settings (“Washer control” setup
menu) Select “Washer control” for “Relay output” on the [Basic] tab of the “Basic” page. Click “Washer control >>”.
(Refer to page 42)
[Pulse width]
Enter the pulse width of the washer from 1 second to 60 seconds in 1 second intervals.
Available time setting: 1 to 60
• Default: 5
[Wiper count]
After the time for the pulse width of the wiper has completed, specify the wiper count.
Available number of counts: 0 to 10
• Default: 2
[Close]...")
7.1.1 Configure the washer settings (“Washer control” setup menu) Select “Washer control” for “Relay output” on the [Basic] tab of the “Basic” page. Click “Washer control >>”. (Refer to page 42) [Pulse width] Enter the pulse width of the washer from 1 second to 60 seconds in 1 second intervals. Available time setting: 1 to 60 • Default: 5 [Wiper count] After the time for the pulse width of the wiper has completed, specify the wiper count. Available number of counts: 0 to 10 • Default: 2 [Close]...
Page 44
![Page 44
The settings relating to UPnP (Auto port forwarding), DDNS (Viewnetcam.com), and network settings for the
Internet can be configured on this page.
[UPnP (Auto port forwarding)]
Select “On” or “Off” to determine whether or not to use the port forwarding function of the router.
To use the auto port forwarding function, the router in use must support UPnP and the UPnP must be enabled.
• Default: Off
Note
•Due to auto port forwarding, the port number may sometimes be changed. When the number is
changed, it...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-43.png "Page 44
The settings relating to UPnP (Auto port forwarding), DDNS (Viewnetcam.com), and network settings for the
Internet can be configured on this page.
[UPnP (Auto port forwarding)]
Select “On” or “Off” to determine whether or not to use the port forwarding function of the router.
To use the auto port forwarding function, the router in use must support UPnP and the UPnP must be enabled.
• Default: Off
Note
•Due to auto port forwarding, the port number may sometimes be changed. When the number is
changed, it...")
The settings relating to UPnP (Auto port forwarding), DDNS (Viewnetcam.com), and network settings for the Internet can be configured on this page. [UPnP (Auto port forwarding)] Select “On” or “Off” to determine whether or not to use the port forwarding function of the router. To use the auto port forwarding function, the router in use must support UPnP and the UPnP must be enabled. • Default: Off Note •Due to auto port forwarding, the port number may sometimes be changed. When the number is changed, it...
Page 45
![Page 45
Click the [OK] button after checking the settings to change the settings to the displayed values. Specifically,
the setting values will be changed as follows.
– [JPEG/H.264] tab on the “Image/Audio” page
[JPEG(1)]
[Image capture size]: VGA/640x360
[JPEG(2)]
[Image capture size]: QVGA/320x180
[JPEG(3)]
[Image capture size]: 160x120/160x90
[H.264(1)]/[H.264(2)]/[H.264(3)]/[H.264(4)]
[Internet mode (over HTTP)]: On
[Transmission priority]: Best effort
[H.264(1)]
[Image capture size]: 1280x960/1280x720
[Max...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-44.png "Page 45
Click the [OK] button after checking the settings to change the settings to the displayed values. Specifically,
the setting values will be changed as follows.
– [JPEG/H.264] tab on the “Image/Audio” page
[JPEG(1)]
[Image capture size]: VGA/640x360
[JPEG(2)]
[Image capture size]: QVGA/320x180
[JPEG(3)]
[Image capture size]: 160x120/160x90
[H.264(1)]/[H.264(2)]/[H.264(3)]/[H.264(4)]
[Internet mode (over HTTP)]: On
[Transmission priority]: Best effort
[H.264(1)]
[Image capture size]: 1280x960/1280x720
[Max...")
Click the [OK] button after checking the settings to change the settings to the displayed values. Specifically, the setting values will be changed as follows. – [JPEG/H.264] tab on the “Image/Audio” page [JPEG(1)] [Image capture size]: VGA/640x360 [JPEG(2)] [Image capture size]: QVGA/320x180 [JPEG(3)] [Image capture size]: 160x120/160x90 [H.264(1)]/[H.264(2)]/[H.264(3)]/[H.264(4)] [Internet mode (over HTTP)]: On [Transmission priority]: Best effort [H.264(1)] [Image capture size]: 1280x960/1280x720 [Max...
Page 46
![Page 46
8 Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG and H.264 images such as the settings of image quality, audio, etc. can be
configured on this page.
The “Image/Audio” page has the [JPEG/H.264] tab, the [Cam. Function ] tab, the [Image/Position ] tab, and the
[Audio] tab.
8.1 Configure the settings relating to the image
capture mode [JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 32, page 34)
[Image capture mode]
Select an...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-45.png "Page 46
8 Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG and H.264 images such as the settings of image quality, audio, etc. can be
configured on this page.
The “Image/Audio” page has the [JPEG/H.264] tab, the [Cam. Function ] tab, the [Image/Position ] tab, and the
[Audio] tab.
8.1 Configure the settings relating to the image
capture mode [JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 32, page 34)
[Image capture mode]
Select an...")
8 Configure the settings relating to images and audio [Image/Audio] The settings relating to JPEG and H.264 images such as the settings of image quality, audio, etc. can be configured on this page. The “Image/Audio” page has the [JPEG/H.264] tab, the [Cam. Function ] tab, the [Image/Position ] tab, and the [Audio] tab. 8.1 Configure the settings relating to the image capture mode [JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 32, page 34) [Image capture mode] Select an...
Page 47
![Page 47
8.2 Configure the settings relating to JPEG images
[JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 32, page 34)
“Live” page (Initial display)
Configure the settings relating to the initial images displayed on the “Live” page.
[Initial display stream]
Select the image to display on the “Live” page from the following.
H.264(1)/H.264(2)/H.264(3)/H.264(4)/JPEG(1)/JPEG(2)/JPEG(3)
• Default: H.264(1)
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-46.png "Page 47
8.2 Configure the settings relating to JPEG images
[JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 32, page 34)
“Live” page (Initial display)
Configure the settings relating to the initial images displayed on the “Live” page.
[Initial display stream]
Select the image to display on the “Live” page from the following.
H.264(1)/H.264(2)/H.264(3)/H.264(4)/JPEG(1)/JPEG(2)/JPEG(3)
• Default: H.264(1)
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image...")
8.2 Configure the settings relating to JPEG images [JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 32, page 34) “Live” page (Initial display) Configure the settings relating to the initial images displayed on the “Live” page. [Initial display stream] Select the image to display on the “Live” page from the following. H.264(1)/H.264(2)/H.264(3)/H.264(4)/JPEG(1)/JPEG(2)/JPEG(3) • Default: H.264(1) [Refresh interval (JPEG)*] Select an interval to refresh the displayed JPEG image...
Page 48
![Page 48
[Image capture size]
Select the image capture size to display the JPEG image.
– When “2 mega pixel [16:9] (30fps mode) ” or “2 mega pixel [16:9] (60fps mode) ” is selected for “Image
capture mode”
1920x1080/1280x720/640x360/320x180/160x90
– When “1.3 mega pixel [4:3]” (30fps mode) is selected for “Image capture mode”
1280x960/800x600/VGA/400x300/QVGA/160x120
• Default:
– JPEG(1): 1920x1080
– JPEG(2): 640x360
– JPEG(3): 320x180
[Image quality]
Select two types of image quality of JPEG images for each...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-47.png "Page 48
[Image capture size]
Select the image capture size to display the JPEG image.
– When “2 mega pixel [16:9] (30fps mode) ” or “2 mega pixel [16:9] (60fps mode) ” is selected for “Image
capture mode”
1920x1080/1280x720/640x360/320x180/160x90
– When “1.3 mega pixel [4:3]” (30fps mode) is selected for “Image capture mode”
1280x960/800x600/VGA/400x300/QVGA/160x120
• Default:
– JPEG(1): 1920x1080
– JPEG(2): 640x360
– JPEG(3): 320x180
[Image quality]
Select two types of image quality of JPEG images for each...")
[Image capture size] Select the image capture size to display the JPEG image. – When “2 mega pixel [16:9] (30fps mode) ” or “2 mega pixel [16:9] (60fps mode) ” is selected for “Image capture mode” 1920x1080/1280x720/640x360/320x180/160x90 – When “1.3 mega pixel [4:3]” (30fps mode) is selected for “Image capture mode” 1280x960/800x600/VGA/400x300/QVGA/160x120 • Default: – JPEG(1): 1920x1080 – JPEG(2): 640x360 – JPEG(3): 320x180 [Image quality] Select two types of image quality of JPEG images for each...
Page 49
![Page 49
8.3 Configure the settings relating to H.264 images
[JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 32, page 34)
Configure the settings relating to H.264 image such as “Max bit rate (per client)* ”, “Image capture size ”, “Image
quality”, etc. in this section. Refer to page 47 for the settings relating to JPEG images.
H.264(1)/H.264(2)/H.264(3)/H.264(4)
[H.264 transmission]
Select “On” or “Off” to determine whether or not to transmit H.264 images.
• On: Transmits H.264...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-48.png "Page 49
8.3 Configure the settings relating to H.264 images
[JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 32, page 34)
Configure the settings relating to H.264 image such as “Max bit rate (per client)* ”, “Image capture size ”, “Image
quality”, etc. in this section. Refer to page 47 for the settings relating to JPEG images.
H.264(1)/H.264(2)/H.264(3)/H.264(4)
[H.264 transmission]
Select “On” or “Off” to determine whether or not to transmit H.264 images.
• On: Transmits H.264...")
8.3 Configure the settings relating to H.264 images [JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 32, page 34) Configure the settings relating to H.264 image such as “Max bit rate (per client)* ”, “Image capture size ”, “Image quality”, etc. in this section. Refer to page 47 for the settings relating to JPEG images. H.264(1)/H.264(2)/H.264(3)/H.264(4) [H.264 transmission] Select “On” or “Off” to determine whether or not to transmit H.264 images. • On: Transmits H.264...
Page 50
![Page 50
•Off: H.264 images and audio will be transmitted using the UDP port.
• Default: Off
Note
•When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
• When “On” is selected, it may take time to start displaying H.264 images.
• When “On” is selected, H.264 images may not be displayed depending on the number of the concurrent
access user and audio data availability, etc.
• When “On” is selected, only IPv4 access is available.
[Image capture size]
Select the image...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-49.png "Page 50
•Off: H.264 images and audio will be transmitted using the UDP port.
• Default: Off
Note
•When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
• When “On” is selected, it may take time to start displaying H.264 images.
• When “On” is selected, H.264 images may not be displayed depending on the number of the concurrent
access user and audio data availability, etc.
• When “On” is selected, only IPv4 access is available.
[Image capture size]
Select the image...")
•Off: H.264 images and audio will be transmitted using the UDP port. • Default: Off Note •When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”. • When “On” is selected, it may take time to start displaying H.264 images. • When “On” is selected, H.264 images may not be displayed depending on the number of the concurrent access user and audio data availability, etc. • When “On” is selected, only IPv4 access is available. [Image capture size] Select the image...