Panasonic Matrix Switcher Wj Sx550c Operating Instructions

75
4
Alarm Menu
As shown below, the Alarm Menu allows access to five items: Alarm Mode Select, Set Up Alarm Modes 1-3 and Timer Alarm
Schedule.
To select an item from the Alarm Menu:
1. Select the desired item by moving the Joystick Controller.
2. To execute the selection, press the CAM (SET)key. The selected item appears on the monitor.
3. To return to the Program Menu, press the MON (ESC)key.
Set Up
Alarm
F1:-- F2:-- F3:-- F4:--PROG. Alarm
Mode Select
Set Up Mode1Alarm
Set Up Mode2Alarm
Set Up...

76
4
Alarm Mode Select
There are 5 Alarm modes available: Mode-1, Mode-2, Mode-3, Off mode  and Timer mode.
In Alarm mode-1, all alarm inputs are displayed in sequential order on monitor 1.
In Alarm mode-2, all alarm inputs are displayed in sequential order on monitors 1 through 4.
In Alarm mode-3, any alarm input can be displayed on any monitor, along with presets (if applicable) and Auxiliary 1 and 2
control.
To program or edit an Alarm Mode Select, do the following:
1. Move the cursor to position 4...

77
4
Set Up Alarm Mode 1
Note:To be able to set up this table, the Alarm Mode on the Alarm Mode Select table must be set to Off.
To program or edit an Alarm Mode 1, do the following:
1. Move the cursor to position 4 by moving the Joystick Controller, then press the CAM (SET)key to execute the selection.
2. Move the cursor to position 5 by moving the Joystick Controller.
Enter the desired dwell time (1-30) by pressing the Numeric keys.
3. Move the cursor to position 6 by moving the Joystick Controller,...

78
4
Set Up Alarm Mode 2
Note:To be able to set up this table, the Alarm Mode on the Alarm Mode Select table must be set to Off.
To program or edit an Alarm Mode 2, do the following:
1. Move the cursor to position 4 by moving the Joystick Controller, then press the CAM (SET)key to execute the selection.
2. Move the cursor to position 5 by moving the Joystick Controller.
Enter the desired dwell time (1-30) by pressing the Numeric keys.
3. Move the cursor to position 6 by moving the Joystick Controller,...

79
4
Set Up Alarm Mode 3
This table is used to set up the alarm function of each alarm input.
This enables display of the alarmed picture on the assigned monitor(s), moves the Pan/Tilt head to the preset position and
controls the auxiliary switches.
There is a total of 110 programmable alarm functions available through 10 pages of tables.
Note:To be able to set up this table, the Alarm Mode on the Alarm Mode Select table must be set to Off.
To program or edit an Alarm Mode 3, do the following:
1. Move...

80
4
[Explanation of Table]
The setup examples in the table on the preceding page are explained below.
Example 1: Spot (S)
An alarm will cause the picture of the alarmed camera to be displayed on the designated monitor.
Contents of Example 1 setup:
When Alarm 1 is activated, Monitor 1 displays the picture of Camera 1 at preset position 1.
When a second alarm, Alarm 2, is activated, Monitor 1 switches to the picture of Camera 2, and after 5 seconds again
switches to the picture of Camera 1 for 10...

81
4
Timer Alarm Schedule
This table is used to enable and disable the Alarm Modes according to the time of day and day of the week.
Note:To be able to set up this table, the Alarm Mode on the Alarm Mode Select table must be set to Off.
To program or edit a Timer Alarm Schedule, do the following:
1. Move the cursor to the desired item (Day or Special Day) by moving the Joystick Controller, then press the CAM (SET)key
to execute the selection.
The selected item appears on the monitor.
2. Move the cursor...

82
4
Operator Menu
The operator menu allows access to two items: the level table and operator registration.
To select an item from the Operator Menu:
1. Select the desired item by moving the Joystick Controller.
2. To execute the selection, press the CAM (SET)key.
The selected menu appears on the monitor.
3. To return to the Set Up Menu, press the MON (ESC)key.
Level Table
This table is used to determine what setup functions and operations may be performed by the 5 operator levels.
There is a total of...

83
4
Operator Registration
This table is used to establish operator numbers for the users of the system along with associated passwords, operator levels
and priorities.
Up to 30 operators may be registered.
Additionally, operator limits for camera access are set on this table.
To program or edit the Registration Table, do the following:
1. Move the cursor to position 3 by moving the Joystick Controller.
Enter an operator number (1-30) by pressing the Numeric keys, and then press the CAM (SET)key.
2....

84
4
Camera Title
This table is used to edit the camera titles to be displayed on the monitor screen.
There are 128 camera titles available.
Each title is composed of 15 characters per line, times 2 lines.
To program or edit the Camera Title Table, do the following:
1. Move the cursor to position 2 by moving the Joystick Controller, then press the CAM (SET)key.
2. Move the cursor with the Joystick Controller to the desired camera number to edit a title (position 3) by moving the Joystick
Controller....