Panasonic Matrix Switcher Wj Sx550c Operating Instructions

106
Direct Preset Setup
The following function requires the use of cameras
equipped with the specific feature.
This function enables registering of preset position number
without opening the camera setup menu.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Move the camera to the preset position to be regis-
tered by moving the Joystick Controller and ZOOM,
FOCUS Controls.
3. Select the PrePOSI Setup (B5)Menu on the LCD dis-
play by pressing the...

107
5
Camera Power and Housing Control
For remote camera power operation, a 24 V AC powered
camera must be installed in the housing.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Cam-Power Housing (B2) Menu on the LCD
display by pressing the Direction buttons.
3. Press the Function (F1) button to toggle the camera
power on and off.
4. Press the Function (F3) button to toggle the housing
wiper on and off.
5. Press the Function (F4)button to...

8. Press the DEC –1CAM button to move the sequence
one frame to the previous step (in forward or reverse
run direction) from the step that was previously paused
by pressing the STOP button
9. Press the FORWARD SEQ button while the ALT indi-
cator is on to restart the sequence forward from the
beginning of the sequence step that was previously
paused by pressing the STOP button.
10. To return to Spot monitoring, select a camera.
Refer to the Camera Selection.
108
4. Press the STOPbutton to pause the...

109
5
Tour Sequence
The following functions are available only if a Tour
Sequence has been previously established through the Set
Up Menu.
As described on page 70, any one of 32 tours can be
assigned to any one of 16 monitors.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Select the desired Tour Sequence number by pressing
the Numeric keys.
3. Press the FORWARD SEQbutton to run the Tour
Sequence in forward direction on the active monitor.
4. Press the STOP button to pause a Tour...

110
5
9. Press the FORWARD SEQbutton while the ALTindi-
cator is on to restart the sequence forward from the
beginning of the sequence step that was previously
paused by pressing the STOP button.
10. To return to Spot monitoring, select a camera.
Refer to the Camera Selection.
SEQALTFORWARD
Group Sequence
The following functions are available only if a Group
Sequence has been previously established through the Set
Up Menu.
As described on page 71, up to 8 Group Sequences can
be set up.
1. As described...

111
5
5. Press the STOPbutton to pause a Group Sequence
that is being run on the assigned monitor.
6. Press the FORWARD SEQ button to restart a Group
Sequence forward from the step that was previously
paused by pressing the STOP button.
7. Press the BACK SEQ button to restart a Group
Sequence backward from the step that was previously
paused by pressing the STOP button.
8. Press the INC +1CAMbutton to move the sequence
one frame to the next step (in forward or reverse run
direction) from the step that...

112
5
Displaying Playback Video
If the VCRs Video Output is connected to the Monitor Input
(MONITOR IN) Connector on the WV-PB5504A Video
Output Board, the VCRs video can be displayed on the
monitor by the following procedures.
When this function is selected, the Camera Title, Date, and
Time are not displayed on the active monitor.
1. Select the monitor connected to the Monitor Output
(MONITOR OUT)Connector systemized with the con-
nected VCRs Monitor Input (MONITOR IN)Connector.
Refer to the Monitor...

113
5
Camera Status Display
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Pan Action (B1)Menu on the LCD display by
pressing the appropriate Direction buttons.
3. Press the Function (F4)button to toggle the camera
status display shown below on and off. 5. Press the Function (F3)button to toggle the date and
time display on the active monitor on and off.
6. Press the Function (F4) button to toggle the camera
title display on the active...

114
5
Camera Function Operation
Electronic Shutter Mode
The following function requires the use of cameras
equipped with the specific feature.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Shutter(C1)Menu on the LCD display by
pressing the appropriate Direction buttons.
3. Select Shutter On mode by pressing the Function (F1)
button.
Pressing the Function (F3)button will select slower
shutter speeds, or pressing the Function (F4) button
will...

115
5
Key No.
Electronic Zoom Mode
The following function requires the use of cameras
equipped with the specific feature.
a) Selecting Area after Zooming Procedures:
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Ele Zoom (C3) Menu on the LCD display by
pressing the appropriate Direction buttons.
3. Select Ele Zoom On mode by pressing the Function
(F1)button.
A Zoomed picture appears on the active monitor with
the area that was last...