Panasonic Matrix Switcher Wj Sx550c Operating Instructions

Backlight Compensation (BLC) Mode
The following function requires the use of cameras
equipped with the specific feature.
1. Select the desired Monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the BLC (D2)Menu on the LCD display by
pressing the appropriate Direction button.
3. Press the Function (F1)button to toggle the Auto BLC
Mode on and off.
4. Press the Function (F2)button to toggle the Preset BLC
Mode on and off. b) Selecting Area before Zooming Procedures:
1....

117
5
Camera Setup
The following function requires the use of cameras
equipped with the specific feature.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Camera Set Up (D4)Menu on the LCD dis-
play by pressing the appropriate Direction button.
Note:The default setting for the Camera Setup Menu is
On. Pressing the Function (F1)button at this
moment will allow access to the Camera Set up
menu if such access is authorized by the opera-
tors...

Changing to Black and White Pictures
The following function is available only when specified cam-
eras with color-black and white switching feature are used.
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the BW (C4)Menu on the LCD display by press-
ing the Direction buttons.
3. Press the Function (F1) button.
The picture will change from color to black and white
picture on the active monitor.
4. Press the Function (F2) button.
The black and...

119
5
Note:“AL0” or “AL1” is displayed in the upper right
corner of the alarmed monitor.
To Cancel Alarm (Plural Monitors)
The following function is used to cancel alarm in a lump
when Alarm Mode 1 or 2 is activated.
1. Select the alarmed monitor.
Select Monitor 1 if Alarm Mode 1 is activated, or one of
Monitors 1 - 4 if Alarm Mode 2 is activated.
2. Press the ALTbutton. The LED indicator on the button
lights.
3. Press the ACK RESETbutton once for alarm acknowl-
edgment.
The LED indicator on the button...

Preset Setting (WV-CS500 Only)
The following function is only available with the WV-CS500
camera that has preset panning functions.
Preset Menu Setting
1. Select the desired monitor and camera.
Refer to the Monitor Selection and Camera Selection.
2. Select the Preset (D3)Menu on the LCD display by
pressing the appropriate Direction buttons.
3. Press the Function (F1) button to select the Preset
Program Mode.
The PRESET PROGRAM Menu appears on the active
monitor.
Refer to the Preset Program Menu shown...

121
5
Setting Up Preset Positions
In the PRESET PROGRAM menu, select SET UP PRESET,
and then press the CAM (SET)key. The PRESET NUMBER
SET table shown below appears on the active monitor.
1. Move the cursor to the desired preset number by mov-
ing the Joystick Controller.
2. Press the CAM (SET) key. The Preset Position Setting
table shown below appears on the monitor.
3. Move the camera to the preset position to be registered
by moving the Joystick Controller, and adjust the zoom
and focus by pressing...

Home Position Setting
In the PRESET PROGRAM menu, select SET HOME POSI,
and then press the CAM (SET)key. The HOME POSITION
table shown below appears on the active monitor.
1. Move the cursor to the HOME POSITION parameter by
moving the Joystick Controller, then select the desired
position number by pressing the Numeric keys.
2. Move the cursor to the AUTO HOME POSITION para-
meter by moving the Joystick Controller, then select
either mode Off or a desired time by pressing theINC +
1CAMbutton or DEC...

123
5
Clearing Preset Settings
1. Select the desired monitor and camera.
Refer to the Monitor Selection and camera Selection.
2. Select the Preset(D3) Menu on the LCD display by
pressing the appropriate Direction buttons.
3. Press the Function (F1) button to select the Preset
Program Mode.
The Preset Program Menu is displayed on the active
monitor, and the LCD display reads as shown below.
4. Move the cursor to SET UP PRESET by moving the
Joystick Controller, then press the CAM (SET) key.
The PRESET...

5. Confirm the display on the LCD display, then press the
CAM (SET) key to delete the selected Camera Position
Number.
If a mistake was made in the above steps, press the
MON (ESC) key to cancel the selection.
6. Repeat the above steps for other camera position num-
bers.
When satisfied with all positions, press the Function
(F4) button to exit from the programming mode.
Camera Position Test Mode
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Select the CAM-P (D5)Menu shown below on...

125
5
5. The test function stops automatically, and the LCD dis-
play reads as shown below.
Press the Function (F4)button to exit from the test
mode. The display will return to the previous CAM-P
Menu.
Camera Position Mode Selection
Operation by camera position number is available only
when CAM-P Mode is set to On mode.
1. Select the CAM-P (D5) Menu shown below on the LCD
display by pressing the appropriate Direction button.
2. Pressing the Function (F4) button will display the menu
shown below on the...