Panasonic LCD Projector Pt Vx410 Operating Instructions

Press 3) as to select [WARNING MESSAGE].
Press 4) qw to switch the item.
The items will switch each time you press the button. f
[ON]Displays the warning/error message.
[OFF]Hides the warning/error message.
[HDMI SIGNAL LEVEL]
Switch the setting when the external equipment is connected to the  terminal of the projector and the image is not 
projected correctly.
Press 1) as to select [HDMI SIGNAL LEVEL].
Press the  button.2) 
The [HDMI SIGNAL LEVEL] screen is displayed. f
Press 3) qw to switch the item....

Press 3) as to select [MODE].
Press 4) qw to switch the item.The items will switch each time you press the button. f
[CC1]Displays CC1 data.
[CC2]Displays CC2 data.
[CC3]Displays CC3 data.
[CC4]Displays CC4 data.
Note
Closed captions are a function that is mainly used in North America to display text information with video signals. Captions  f
may not be displayed depending on the connected devices or software bein\
g played back.
[CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YC fBCR...

[AUTO SETUP SETTING]
Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the  button on the remote control or on the control panel on each occasion if you input unr\
egistered signals frequently at meetings, etc.
Press 1) as to select [AUTO SETUP SETTING].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[AUTO]Enables the auto setup function when switching signals.
[BUTTON]Enables the...

[P-TIMER]
Set and operate the presentation timer function.
Press 1) as to select [P-TIMER].
Press the  button.2) 
The [P-TIMER] screen is displayed. f
[MODE]Switches the presentation time between [COUNT UP] and [COUNT DOWN].
[TIMER]Sets the finish time of timer when [COUNT DOWN] is selected.
[START] / [STOP] /[RESTART]Operates the timer.
[RESET]Resets the count.
[EXIT][P-TIMER] is finished.
Setting [MODE]
Press 1) as to select [MODE].
Press 2) qw to switch the item.
The items will switch each time you...

[P IN P]
(Only for PT-VW340Z)
Locate a separate, small sub screen in the main screen to project two im\
ages simultaneously.
Press 1) as to select [P IN P].
Press the  button.2) 
The [P IN P] screen is displayed. f
[MODE]
Press 1) as to select [MODE].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[OFF]P IN P function is disabled.
[SIDE BY SIDE]Sub screen is displayed at the side of the main screen.
[P IN P]Sub screen is displayed in the main screen.
[SUBPICTURE...

[PROJECTOR SETUP] menu
On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (Æpage 45) for the operation of the menu screen.
After selecting the item, press  fasqw to set.
[STATUS]
You can check the using status of the projector.
Press 1) as to select [STATUS].
Press the  button.2) 
The [STATUS] screen is displayed. f
[SIGNAL][NAME]Displays the name of input signal.
[FREQUENCY]Displays the scanning frequency...

Press 3) as to select the [PROJECTOR ID].
Select one from [ALL], and [1] to [6]. f
[ALL]Select when controlling projectors without specifying an ID number.
[1]-[6]Select when specifying an ID number to control individual projector.
Press the  button to set it.4) 
[PROJECTOR ID] is set. f
Note
The ID number can be set to [ALL], or from [1] to [6]. f
To specify an ID number for individual control, the ID number of a remote\
 control must match the ID number of the projector. f
When the ID number is set to...

[LAMP POWER]
Switch the brightness of the lamp according to the operating environment\
 of the projector or the purpose.
Press 1) as to select [LAMP POWER]. 
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[NORMAL]Select when high luminance is required.
[ECO1]Select when high luminance is not required.
[ECO2]Select when high luminance is not required and the operation sound is ne\
eded more quiet.
Note
You can reduce power consumption and operation noise, and...

[READY]The countdown timer is displayed after 30 seconds without input signal. The projection lamp turns off and cools down when reaching the set time, meanwhile the projector is in the power\
 management mode. The projection lamp will be turned on if the input signal is reconnected\
 or any button is pressed.
[SHUT DOWN]The countdown timer is displayed after 30 seconds without input signal. The projection lamp is turned off and cooled down when reached the set time, then the projector enter into standby...

[VX500 SERIES]VW435N series, VW440 series, VW430 series, VX505N series, VX510 series, VX500 series, VW330 series, VX400NT series, VX400 series, VX41 series  
[EZ570 SERIES]EZ570 series, EW630 series, EW530 series, EX600 series,  EX500 series
[VW431D]VW431D series
Press the  button.4) 
[FUNCTION BUTTON]
The function assigned to the  button of the remote control is displayed. You can also release the assigned 
setting.
Releasing assigned function to the  button
Press 1) as to select [FUNCTION BUTTON]....