Panasonic LCD Projector Pt Vx410 Operating Instructions

Using the AV MUTE function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the audio and video temporarily.
button
Press the 1)  button on the remote control.
The audio and video turn off. f
Press the  button again.2) 
The audio and video turn on. f
Note
When [MIC] is set to [ON], the audio of MIC can be output even during AV MUTE. f
Using the P-TIMER function
You can operate the P-TIMER function.
When you press the...

Button functions of moving screen r
Operation menuOperationAdjustment
Press the as buttons.Moves the area to the top or the bottom.
Press the qw buttons.Moves the area to the left or the right.
When you have executed the operation of remote control directly, the individual adjustment screen is not be displayed  f
and the operation menu of the moving screen is displayed. At this time, you can adjust the magnification by using the 
 or  button on the remote control.
ABC
ABC
ABCABC
ABC
Note
Magnification...

Using the P IN P function
(Only for PT-VW340Z)
Two images can be projected simultaneously in form of projection mode (a small sub screen in the main screen  
[P IN P]/a small sub screen side by side with the main screen [SIDE BY SIDE]).
button
Press the 1)  button on the remote control.
Press this button to switch the mode ([P IN P]/[SIDE BY SIDE]). f
Note
For details, refer to [P IN P] ( fÆ page 65). 
Switch the input source
You can switch the input source of the main screen and sub screen while t\
he P...

Chapter 4   Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.
44 - ENGLISH 

Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 button
Press the  button 1) on the remote control or the control panel.
The main menu screen appears. f
Press 2) as to select an item from the main menu.
The selected item is highlighted in yellow. f
Press the  button.3) 
The submenu is displayed, and submenu items become selectable. f
Press 4) as to select the desired sub-menu item, press qw or...

Note
Pressing the  button or  button while the menu screen is displayed returns to the previous menu. f
Some items may not be adjusted or used for certain signal formats to be \
input to the projector. The menu items that cannot  f
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME 
LOCK] may not be displayed depending on the input signal.
Some items can be adjusted even if signals are not input. f
Individual adjustment screen is cleared...

Sub menu
The sub-menu screen of the selected main menu appears, and you can set a\
nd adjust the various items in the submenu.
PICTURE [  ]
Sub-menu itemFactory defaultPage
[PICTURE MODE][STANDARD]*149
[CONTRAST][0]49
[BRIGHTNESS][0]50
[COLOR]*2[0]50
[TINT]*2[0]50
[SHARPNESS][8]50
[COLOR TEMPERATURE][DEFAULT]51
[IRIS][OFF]*151
[ADVANCED MENU]-51
[DAYLIGHT VIEW][AUTO]51
[DIGITAL CINEMA REALITY][ON]52
[NOISE REDUCTION]*3[OFF]52
[TV-SYSTEM]*3[AUTO]52
[RGB/YPBPR]/[RGB/YCBCR]*4[AUTO]53
It may be different...

PROJECTOR SETUP [  ]
Sub-menu itemFactory defaultPage
[STATUS]-66
[COMPUTER2 SELECT][COMPUTER2 IN]66
[PROJECTOR ID][ALL]66
[INITIAL START UP][LAST MEMORY]67
[PROJECTION METHOD][FRONT/DESK]67
[HIGH ALTITUDE MODE][OFF]67
[LAMP POWER][NORMAL]68
[ECO MANAGEMENT]-68
[EMULATE][DEFAULT]69
[FUNCTION BUTTON]-70
[AUDIO SETTING]-70
[TEST PATTERN]-72
[FILTER COUNTER]-72
[INITIALIZE ALL]-72
SECURITY [  ]
Sub-menu itemFactory DefaultPage
[PASSWORD][OFF]73
[PASSWORD CHANGE]-73
[TEXT DISPLAY][OFF]74
[TEXT CHANGE]-74...

[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an i\
tem from the submenu.Refer to "Navigating through the menu" (xpage 45) for the operation of the menu screen.After selecting the item, press asqw to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source \
and the environment in which the projector is used.
Press 1) as to select [PICTURE MODE]. 
Press 2) qw or the  button.
The [PICTURE MODE] individual adjustment screen is...

[BRIGHTNESS]
You can adjust the dark (black) part of the projected image.
Press 1) as to select [BRIGHTNESS].
Press 2) qw or the  button.
The [BRIGHTNESS] individual adjustment screen is displayed. f
Press 3) qw to adjust the level.
OperationAdjustmentAdjustment range
Press the ► button.Increases the brightness of the dark (black) parts of the screen.-32 ~ +32Press the ◄ button.Reduces the brightness of the dark (black) parts of the screen.
[COLOR]
(Only for movie-based signal input)
You can adjust the...