Panasonic LCD Projector Pt Vx410 Operating Instructions

The items will switch each time you press the button. f
[OFF]Disables audio output in the standby mode.
[ON]Enables audio output in the standby mode when [STANDBY MODE] is set to [NORMAL]. At this time, press the  buttons on the remote control or qw buttons on the control panel to adjust the volume.
Note
Audio cannot be output during standby when [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO]  for [NETWORK] (Æpage 69).
Setting audio input selection
Choose the audio input terminal for each input...

[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before 
performing various adjustments.
Press 1) as to select [TEST PATTERN].
Press the  button.2) 
The [TEST PATTERN] screen is displayed. f
Press 3) qw to switch the items.
The items will switch each time you press the button.  f
ALL WHITE → COLOR BARS → WHITE CROSS ON BLACK BACKGROUND → BLACK CROSS ON THE WHITE...

[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the submenu.
Refer to "Navigating through the menu" (Æpage 45) for the operation of the menu screen.
When the projector is used for the first time Initial password: Press  fawsqawsq in order, and press the  
button.
After selecting the item, press  fasqw to set.
 
Attention
When you select the [SECURITY] menu and press the  button, entering a password is required. Enter the preset  fpassword and...

Note
The entered password is displayed with " f" mark on the screen.
An error message is displayed on the screen when the entered password is\
 incorrect. Re-enter the correct password. fIf numbers have been used for the security password, the security password will need to be initialized again if the remote  f
control is lost. Consult your dealer for the initialization method.
[TEXT DISPLAY]
Overlap the security message (text or image) over the projecting image.
Press 1) as to select [TEXT...

[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote\
 control.
Press 1) as to select [CONTROL DEVICE SETUP].
Press the  button.2) 
The [CONTROL DEVICE SETUP] screen is displayed. f
Press 3) as to select one item between [CONTROL PANEL] and [REMOTE CONTROLLER].
[CONTROL PANEL]You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER]You can set the limitation on the control from the remote control.
Press 4) qw to switch between...

[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the submenu.
Refer to "Navigating through the menu" (Æpage 45) for the operation of the menu screen.
After selecting the item, press  fasqw to set.
[WIRED LAN]
You can make detailed wired LAN settings.
Press 1) as to select [WIRED LAN].
Press the  button.2) 
The [WIRED DETAILED SETUP] screen is displayed. f
Press 3) as to select an item, and change the setting according to the instructions\
.
[DHCP]...

[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
Press 1) as to select [NAME CHANGE].
Press the  button.2) 
The [NAME CHANGE] screen is displayed. f
Select characters with the 3) asqw buttons and press the  button to enter the projector name. 
Select [ALL DELETE] to delete all the entered characters, or press the  button on the remote control to  f
delete a character on the cursor in the entry field.
Select [OK] with the 4) as buttons and press the  button. 
To...

[STATUS]
Displays the current network status.
Press 1) as to select [STATUS].
Press the  button.2) 
The f [STATUS] screen is displayed. 
[INITIALIZE]
This function is used to return various setting values of [NETWORK] to the factory default value.
Press 1) as to select [INITIALIZE].
Press the  button.2) 
The  f[INITIALIZE] screen is displayed.
Press 3) qw to select [OK] and press the  button.
78 - ENGLISH
Chapter 4   Settings - [NETWORK] menu 

Network connections
The projector has a network function, and the following operations are a\
vailable from the computer using the web browser 
control.
Setting and adjustment of the projector. f
Display of the projector status. f
Transmission of an E-mail message when there is a problem with the projec\
tor. f
The projector supports "Crestron Connected™", and the following application software of Crestron Electronics, Inc. can be 
used.
RoomView Express f
Fusion RV f
RoomView Server Edition f...

Accessing from the Web browser
Activate the Web browser in the personal computer.1) 
Enter the IP address set by the projector into the URL input field of the Web browser.2) 
Enter your3)  “User name” and “Password”.
The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is  f
panasonic (lower case).
Click [OK] to display the Projector status page.4) 
The [Projector status] page is displayed. f
Note
If you use a web browser to control the...