Panasonic LCD Projector Pt Vx410 Operating Instructions

							Using the AV MUTE function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the audio and video temporarily.
button
Press the 1)  button on the remote control.
The audio and video turn off. f
Press the  button again.2) 
The audio and video turn on. f
Note
When [MIC] is set to [ON], the audio of MIC can be output even during AV MUTE. f
Using the P-TIMER function
You can operate the P-TIMER function.
When you press the  button on the remote control, the projector displays either a remaining time or a elapsed time.
button
Press the  button on the remote control.1) 
The count time starts. f
Remaining time or elapsed time is displayed in the lower right corner of\
 the projected image. f
Press the  button again.2) 
The count time stops. f
Press the  button again.3) 
You can restart the count. f
Note
Pressing the button for at least 3 seconds to release the P-TIMER functi\
on. fFor details, please refer to the [DISPLAY OPTION] menu → [P-TIMER] ( fÆpage 64).
Using the DIGITAL ZOOM function
(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged.
buttons
Press the  or  button on the remote control.1) 
The moving screen is displayed. f
The [DIGITAL ZOOM] individual adjustment screen is displayed when executing the menu operation. For details, refer  f
to [DISPLAY OPTION] → [OTHER FUNCTIONS] (Æpage 65).
Pressing the  button cancels the function. f
Button functions during [DIGITAL ZOOM] r
Operation menuOperationAdjustmentAdjustment range
Press the  button or w button.Increases magnification.
1.0 ~ 3.0
Press the  button or q button.Decreases magnification.
ENGLISH - 41
Chapter 3   Basic Operations - Basic operations by using the remote cont\
rol 
						

							Button functions of moving screen r
Operation menuOperationAdjustment
Press the as buttons.Moves the area to the top or the bottom.
Press the qw buttons.Moves the area to the left or the right.
When you have executed the operation of remote control directly, the individual adjustment screen is not be displayed  f
and the operation menu of the moving screen is displayed. At this time, you can adjust the magnification by using the 
 or  button on the remote control.
ABC
ABC
ABCABC
ABC
Note
Magnification can be set from 1.0x to 3.0x in 0.1 increments. fWhen press the  button during [DIGITAL ZOOM], the DIGITAL ZOOM function will be cancelled. fWhen the input signals change during [DIGITAL ZOOM], the DIGITAL ZOOM function will be cancelled. fWhen [DIGITAL ZOOM] is active, the FREEZE function is not available. f
Controlling the volume of the speaker
You can control the volume of the projector’s speaker or audio output.
buttons
Press 1) the  or  button on the remote control. 
This operation can be also performed using the  fqw buttons on the control panel.
Decreases the volume.
Increases the volume.
Using the MUTE function
This function allows you to turn off the audio output temporarily.
button
Press the  button on the remote control.1)  
The audio turns off. f
Press the  button again.2) 
The audio turns on. f 
42 - ENGLISH
Chapter 3   Basic Operations - Basic operations by using the remote cont\
rol 
						

							Using the P IN P function
(Only for PT-VW340Z)
Two images can be projected simultaneously in form of projection mode (a small sub screen in the main screen  
[P IN P]/a small sub screen side by side with the main screen [SIDE BY SIDE]).
button
Press the 1)  button on the remote control.
Press this button to switch the mode ([P IN P]/[SIDE BY SIDE]). f
Note
For details, refer to [P IN P] ( fÆ page 65). 
Switch the input source
You can switch the input source of the main screen and sub screen while t\
he P IN P function is operating.
Switch the input source of the main screen r
Switch the input source as the same operation as the single screen.
Switch the input source of the sub screen r
When two screens are displayed (when no menu is displayed), press the  button, the red frame of the 
sub screen will be displayed. Switch the input source as the same operat\
ion as the single screen.
Press the  button again, the red frame of the sub screen will disappear and then return to switch the 
input source of the main screen.
INPUT AINPUT A
INPUT B
INPUT AINPUT B
Main screen
Sub screen
Main screen
Sub screen
ENGLISH - 43
Chapter 3   Basic Operations - Basic operations by using the remote cont\
rol 
						

							Chapter 4   Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.
44 - ENGLISH 
						

							Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 button
Press the  button 1) on the remote control or the control panel.
The main menu screen appears. f
Press 2) as to select an item from the main menu.
The selected item is highlighted in yellow. f
Press the  button.3) 
The submenu is displayed, and submenu items become selectable. f
Press 4) as to select the desired sub-menu item, press qw or the  button to set or adjust 
settings.
Some items will switch in order as follows each time you press  fqw.
ABC 
For some items, press  fqw to display an individual adjustment screen with a bar scale as shown be\
low.
ENGLISH - 45
Chapter 4   Settings - Menu Navigation 
						

							Note
Pressing the  button or  button while the menu screen is displayed returns to the previous menu. f
Some items may not be adjusted or used for certain signal formats to be \
input to the projector. The menu items that cannot  f
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME 
LOCK] may not be displayed depending on the input signal.
Some items can be adjusted even if signals are not input. f
Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds. f
For menu items, refer to “Main menu” ( fÆpage 46) and “Sub-menu” (Æpage 47).
Resetting adjustment values to the factory default
If the  button on the remote control is pressed, the values adjusted in the menu items are restored to the factory 
default settings.
  
button
Press the  button on the remote control.1) 
Note
You cannot reset all the settings to the factory default at a time. f
To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute [PROJECTOR SETUP]  f
menu → [INITIALIZE ALL] (Æ page 72).
Some items cannot be reset by pressing the  button. Adjust each item manually. f
Main menu
The main menu consists of the following 7 menu items.
When a main menu item is selected, the screen changes to a submenu selec\
tion screen.
Main-menu itemPage
[PICTURE]49
[POSITION]54
[LANGUAGE]59
[DISPLAY OPTION]60
[PROJECTOR SETUP]66
[SECURITY]73
[NETWORK]76
46 - ENGLISH
Chapter 4   Settings - Menu Navigation 
						

							Sub menu
The sub-menu screen of the selected main menu appears, and you can set a\
nd adjust the various items in the submenu.
PICTURE [  ]
Sub-menu itemFactory defaultPage
[PICTURE MODE][STANDARD]*149
[CONTRAST][0]49
[BRIGHTNESS][0]50
[COLOR]*2[0]50
[TINT]*2[0]50
[SHARPNESS][8]50
[COLOR TEMPERATURE][DEFAULT]51
[IRIS][OFF]*151
[ADVANCED MENU]-51
[DAYLIGHT VIEW][AUTO]51
[DIGITAL CINEMA REALITY][ON]52
[NOISE REDUCTION]*3[OFF]52
[TV-SYSTEM]*3[AUTO]52
[RGB/YPBPR]/[RGB/YCBCR]*4[AUTO]53
It may be different depending on the input signal.*1 Only for movie-based signals.*2 Only when the / terminal is selected.*3 Only when the / terminal is selected.*4 
Note
The factory default settings may vary depending on the picture mode. f
POSITION [  ]
Sub-menu itemFactory defaultPage
[REALTIME KEYSTONE][ON]54
[KEYSTONE]-54
[SHIFT]-56
[DOT CLOCK]*1[0]56
[CLOCK PHASE]*1[0]56
[OVER SCAN]-57
[ASPECT]-57
[FRAME LOCK]*1[OFF]58
Only for still image signals.*1 
LANGUAGE [  ]
Details (Æpage 59)
DISPLAY OPTION [  ]
Sub-menu itemFactory defaultPage
[ON-SCREEN DISPLAY]-60
[HDMI SIGNAL LEVEL][AUTO]61
[CLOSED CAPTION SETTING]-61
[SCREEN SETTING]*1-62
[STARTUP LOGO][DEFAULT LOGO]62
[AUTO SETUP SETTING][AUTO]63
[SIGNAL SEARCH][ON]63
[BACK COLOR][BLUE]63
[WIDE MODE]-63
[SXGA MODE]-63
[P-TIMER]-64
[P IN P]*1-65
[OTHER FUNCTIONS]-65
Only for PT-VW340Z.*1 
ENGLISH - 47
Chapter 4   Settings - Menu Navigation 
						

							PROJECTOR SETUP [  ]
Sub-menu itemFactory defaultPage
[STATUS]-66
[COMPUTER2 SELECT][COMPUTER2 IN]66
[PROJECTOR ID][ALL]66
[INITIAL START UP][LAST MEMORY]67
[PROJECTION METHOD][FRONT/DESK]67
[HIGH ALTITUDE MODE][OFF]67
[LAMP POWER][NORMAL]68
[ECO MANAGEMENT]-68
[EMULATE][DEFAULT]69
[FUNCTION BUTTON]-70
[AUDIO SETTING]-70
[TEST PATTERN]-72
[FILTER COUNTER]-72
[INITIALIZE ALL]-72
SECURITY [  ]
Sub-menu itemFactory DefaultPage
[PASSWORD][OFF]73
[PASSWORD CHANGE]-73
[TEXT DISPLAY][OFF]74
[TEXT CHANGE]-74
[MENU LOCK][OFF]74
[MENU LOCK PASSWORD]-74
[CONTROL DEVICE SETUP]-75
NETWORK [  ]
Sub-menu itemFactory defaultPage
[WIRED LAN]-76
[NAME CHANGE]-77
[NETWORK CONTROL][ON]77
[AMX D. D.][OFF]77
[Crestron Connected(TM)][OFF]77
[STATUS]-78
[INITIALIZE]-78
Note
Some items may not be adjusted or used for certain signal formats to be \
input to the projector. f
The menu items that cannot be adjusted or used are shown in gray charact\
ers, and they cannot be selected. f
Sub-menu items and factory default settings differ depending on the selected input terminal. f
48 - ENGLISH
Chapter 4   Settings - Menu Navigation 
						

							[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an i\
tem from the submenu.Refer to "Navigating through the menu" (xpage 45) for the operation of the menu screen.After selecting the item, press asqw to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source \
and the environment in which the projector is used.
Press 1) as to select [PICTURE MODE]. 
Press 2) qw or the  button.
The [PICTURE MODE] individual adjustment screen is displayed. f
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[STANDARD]The picture becomes suitable for moving images in general.
[DYNAMIC]The light output is maximized for use in bright areas.
[BLACKBOARD]The picture becomes suitable for projecting on a black board.
[WHITE BOARD]The picture becomes suitable for projecting on a white board.
[CINEMA]*1The picture becomes suitable for movie sources.
[NATURAL]*2The picture complies with sRGB.
Only for the movie-based signals.*1 Only for the still image signals.*2 
Note
The factory default picture mode is [DYNAMIC] for still image input signals and [STANDARD] for movie-based input signals. f
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International Electrotechnical  f
Commission).
[CONTRAST]
You can adjust the contrast of the colors.
Press 1) as to select [CONTRAST].
Press 2) qw or the  button.
The [CONTRAST] individual adjustment screen is displayed. f
Press 3) qw to adjust the level.
OperationAdjustmentAdjustment range
Press the ► button.Brightens the screen and makes the color deeper.-32 ~ +32Press the ◄ button.Darkens the screen and makes the color lighter.
Attention
Adjust [BRIGHTNESS] first when you need to adjust [BRIGHTNESS] and [CONTRAST]. f
ENGLISH - 49
Chapter 4   Settings - [PICTURE] menu 
						

							[BRIGHTNESS]
You can adjust the dark (black) part of the projected image.
Press 1) as to select [BRIGHTNESS].
Press 2) qw or the  button.
The [BRIGHTNESS] individual adjustment screen is displayed. f
Press 3) qw to adjust the level.
OperationAdjustmentAdjustment range
Press the ► button.Increases the brightness of the dark (black) parts of the screen.-32 ~ +32Press the ◄ button.Reduces the brightness of the dark (black) parts of the screen.
[COLOR]
(Only for movie-based signal input)
You can adjust the color saturation of the projected image.
Press 1) as to select [COLOR].
Press 2) qw or the  button.
The [COLOR] individual adjustment screen is displayed. f
Press 3) qw to adjust the level.
OperationAdjustmentAdjustment range
Press the ► button.Deepens colors.-32 ~ +32Press the ◄ button.Weakens colors.
[TINT]
(When input movie-based signal to the  / terminal, only for NTSC/NTSC4.43 signal)
You can adjust the skin tone in the projected image.
Press 1) as to select [TINT].
Press 2) qw or the  button.
The [TINT] individual adjustment screen is displayed. f
Press 3) qw to adjust the level.
OperationAdjustmentAdjustment range
Press the ► button.Adjusts skin tone toward greenish color.-32 ~ +32Press the ◄ button.Adjusts skin tone toward reddish purple.
[SHARPNESS]
You can adjust the sharpness of the projected image.
Press 1) as to select [SHARPNESS].
Press 2) qw or the  button.
The [SHARPNESS] individual adjustment screen is displayed. f
Press 3) qw to adjust the level.
OperationAdjustmentAdjustment range
Press the ► button.Contours become sharper.0 ~ +15Press the ◄ button.Contours become softer.
Note
[SHARPNESS] will be invalid when [DAYLIGHT VIEW] is set to [AUTO] or [ON]. f
50 - ENGLISH
Chapter 4   Settings - [PICTURE] menu