Panasonic LCD Projector Pt Vx410 Operating Instructions

Read this first! ............................................2
Chapter 1   Preparation
Precautions for use .................................................14
Cautions when transporting ..................................14
Cautions when installing .......................................14
Security  ................................................................15
Disposal ................................................................15
Cautions on use...

[P IN P] .................................................................65
[OTHER FUNCTIONS] .........................................65
[PROJECTOR SETUP] menu  ..................................66
[STATUS] ..............................................................66
[COMPUTER2 SELECT]  ......................................66
[PROJECTOR ID] .................................................66
[INITIAL START UP]  .............................................67
[PROJECTION METHOD]...

Chapter 1   Preparation
This chapter describes things you need to know or check before using the\
 projector.
ENGLISH - 13 

Precautions for use
Cautions when transporting
When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. Doing  f
so may damage the internal parts and result in malfunctions.
Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet. f
Cautions when installing
Do not set up the projector outdoors. r
The projector is designed for indoor use only.  f
Do not use under the following conditions. r
Places where...

Cautions when setting the projectors r
Do not stack the projectors. f
Do not block the ventilation ports (intake and exhaust) of the projector. f
Avoid heating and cooling air from the air conditioning system directly blow to the ventilation ports (intake and  f
exhaust) of the projector.
Do not install the projector in a confined space.   f
When placing the projector in a confined space, a ventilation and/or air conditioning system is required. Exhaust heat may 
accumulate when the ventilation is not...

Cautions on use
To get a good picture quality r
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indo\
or  f
lamps from shining onto the screen.
Depending on where the projector is used, heated air from an exhaust port or warm or cold air from an air conditioner can  f
cause a shimmering effect on screen. 
Avoid use in locations where exhaust or streams of air from projector, other devices and air conditioners flow between the 
projector...

Accessories
Make sure the following accessories are provided with your projector. Numbers enclosed < > show the number of accessories.
Wireless remote control unit 
(N2QAYA000070)   (N2QAYA000071)
CD ROM 
(TXFQB02UFBZ)
Power cord
(TXFSX02UXRZ)
AAA/R03 or AAA/LR03 battery 
(for remote control unit)
(TXFSX02UYAZ)VGA cable 
(K1HY15YY0012)
(TXFSX02UFEZ)String 
(6103504711)
(TXFSX02UTRZ)Lens cap 
(TKKL5568)
Attention
After unpacking the projector, discard the power cord cap and packaging material properly. f...

Contents of the supplied CD-ROM
The contents of the supplied CD-ROM are as follow.
Instruction/list (PDF)
Operating Instructions – Functional Manual
Operating Instructions – Multi Projector Monitoring & Control Software
Operating Instructions – Logo Transfer Software 
List of compatible projector modelsThis is a list of projectors that are compatible 
with the software, and their restrictions.
Software
Multi Projector Monitoring & Control 
Software (Windows)
This software allows you to monitor and...

Start-up display
When the projector is switched on for the first time after purchase as well as when [INITIALIZE ALL] is executed in the 
[PROJECTOR SETUP] menu, then the initial setting screen is displayed. Set them in accordance with circumstances.
In other occasions, you can change the settings by menu operations.
Initial setting (display language)
Select the language to show on the screen.
Press 1) asqw to select the display language.
Press the  button to proceed to the initial setting.2) 
Initial...

About your projector
Remote control
Attention
Do not drop the remote control. f
Avoid contact with liquids. f
Do not attempt to modify or disassemble the remote control. f
 ButtonTurn the projector on or off. (Æpages 36,37)
Input Selection Buttons: , 2 , , , .  
These buttons are used to select the input signal. (Æpage 40)
asqw3  Buttons,  Button Navigate the MENU display.
 Button4 Resets the content of the sub-menu to the factory default.
(Æpage  46)
 Button5 Open or close the On-Screen Menu. (Æpage...