Panasonic LCD Projector Pt Vw345NZ Operating Instructions

Setting [TIMER] 
1) Press as to select [TIMER].
2) Press qw to switch the setting of the timer.
 fThe items will switch each time you press the button.  
[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H]
[FILTER COUNTER RESET] 
1) Press as to select [FILTER COUNTER RESET]. zThe [FILTER COUNTER RESET] screen is displayed.
2) Press the  button.
3) When the confirmation is displayed, press qw to select [OK] and then press the  button.
[INITIALIZE ALL]
Return various setting values to...

[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the submenu.Refer to "Navigating through the menu" (Æpage 54) for the operation of the menu screen.
 f When the projector is used for the first time Initial password:  
Press awsqawsq in order, and press the  button.
 fAfter selecting the item, press asqw to set.
Attention
 fWhen you select the [SECURITY] menu and press the  button, entering a password is required. Enter the preset password and...

[TEXT DISPLAY]
Overlap the security message (text) over the projecting image.
1) Press as to select [TEXT DISPLAY].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]Disables the text display.
[ON]Enables the text display.
[TEXT CHANGE]
Change the text displayed when the text display is enabled by selecting [ON] in [TEXT DISPLAY].
1) Press as to select [TEXT CHANGE].
2) Press the  button.
 fThe [TEXT CHANGE] screen is displayed.
3) Press asqw to select the text,...

[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press as to select [CONTROL DEVICE SETUP].
2) Press the  button.
 fThe [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select one item between [CONTROL PANEL] and [REMOTE CONTROLLER].
[CONTROL PANEL]You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER]You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE]...

[NETWORK/USB] menu
On the menu screen, select [NETWORK/USB] from the main menu, and select \
an item from the submenu.
Refer to "Navigating through the menu" (Æpage 54) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
Confirmation of the network information
When connecting the "Wireless Manager ME6.0", the dedicated application of iPad/iPhone/iPod touch/Android, 
or the Miracast-certified device to a projector, the information such as Network number of...

4) Press as to select [OK], and press the  button.
 rDefault wired LAN settings 
 fThe following settings are set before the projector leaves the factory.
[DHCP]OFF
[IP ADDRESS]1 9 2 .1 6 8 .1 0 .1 0 0
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]1 9 2 .1 6 8 .1 0 .1
[DNS1]/[DNS2]NONE
Note
 fBefore using the DHCP server, make sure the DHCP server is already functioning.
 fConsult your network administrator regarding the IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY.
 fA wired LAN and wireless LAN cannot be...

[IP ADDRESS]1 9 2 .1 6 8 .12 .1 0 0
[SUBNET MASK]255.255.255.0
[SSID]M-DIRECT + The last 4 digits of 
the projector ID
[CHANNEL]1
[KEY]The same string as the SSID
Note
 fThe authentication method is WPA2-PSK, and the encryption method is AES. Both methods are fixed. fWhen you need to change initial configuration of [M-DIRECT], please contact your network administrator. fThe initial setting is [KEY], there is a risk that the leakage of information by a third party. Change the initial setting is necessary....

 r[ENCRYPTION] setting
[NONE]Select when transmit without encryption. It is selectable only when 
[AUTHENTICATION] is [OPEN] or [SHARED].
[WEP]Select when Encryption is WEP.
[TKIP] 
Select when Encryption is TKIP.
Selectable when [AUTHENTICATION] is either [WPA-PSK], [WPA2-PSK],  
[WPA-EAP], [WPA2-EAP].
[AES] 
Select when Encryption is AES.
Selectable when [AUTHENTICATION] is either [WPA-PSK], [WPA2-PSK],  
[WPA-EAP], [WPA2-EAP].
 rWhen setting [OPEN] or [SHARED] as authentication and setting [WEP] as t\...

[CONNECTION LOCK]
Switches the network signal or chooses one fixed signal.
1) Press as to select [CONNECTION LOCK].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]The [NETWORK/USB] input signal can be switched between [Panasonic APPLICATION], 
[Miracast(TM)] and [MEMORY VIEWER].
[Panasonic APPLICATION]The [Panasonic APPLICATION] is the fixed [NETWORK/USB] input signal.
[Miracast(TM)]The [Miracast(TM)] is the fixed [NETWORK/USB] input signal.
[MEMORY...

[NETWORK CONTROL]
Set when you want to control the projector from a computer connected to the network.
1) Press as to select [NETWORK CONTROL].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[ON]This function is enabled. WEB control, PJLink control, the command control of the LAN are 
enabled.
[OFF]This function is disabled.
[AMX D. D.]
Set to [ON] to control with the controller of AMX Corporation.
Setting this function to [ON] enables detection through “AMX...