Panasonic LCD Projector Pt Vw345NZ Operating Instructions

							Setting [TIMER] 
1) Press as to select [TIMER].
2) Press qw to switch the setting of the timer.
 fThe items will switch each time you press the button.  
[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H]
[FILTER COUNTER RESET] 
1) Press as to select [FILTER COUNTER RESET]. zThe [FILTER COUNTER RESET] screen is displayed.
2) Press the  button.
3) When the confirmation is displayed, press qw to select [OK] and then press the  button.
[INITIALIZE ALL]
Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE ALL]. zThe [INITIALIZE ALL] screen is displayed.
2) Press the  button.
3) When the confirmation is displayed, press qw to select [OK] and then press the  button. zThe [POWER OFF.] screen is displayed.
4) Press the  button.
 zThe operation is disabled except for turning off the power.
Note
 fThe projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.
 fWhen [INITIALIZE ALL] is executed, [EMULATE] and the setting values of [NETWORK/USB] cannot be returned to 
the factory default values. For details about the initialization of [NETWORK/USB], please refer to [NETWORK/USB] → 
[INITIALIZE] (Æpage 91).
ENGLISH - 81
Chapter 4   Settings - [PROJECTOR SETUP] menu  
						

							[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the submenu.Refer to "Navigating through the menu" (Æpage 54) for the operation of the menu screen.
 f When the projector is used for the first time Initial password:  
Press awsqawsq in order, and press the  button.
 fAfter selecting the item, press asqw to set.
Attention
 fWhen you select the [SECURITY] menu and press the  button, entering a password is required. Enter the preset password and then continue operations of the [SECURITY] menu. fWhen the password has been changed previously, enter the changed password, and press the  button.
Note
 fThe entered password is displayed with "" mark on the screen. fAn error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[PASSWORD]
The [PASSWORD] screen is displayed when the power is turned on, [INITIALIZE ALL] is executed or [INITIALIZE] in the [NETWORK/USB] menu is executed. When the entered password is incorrect, the operation will be restricted to the power standby  button on the control panel or  button on the remote control.
1) Press as to select [PASSWORD].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]Disables the security password entry.
[ON]Enables the security password entry.
Note
 fThe [PASSWORD] setting is set to [OFF] by the factory default. fChange the password periodically that is hard to guess. fThe security password is enabled after setting [PASSWORD] to [ON] and turning the power off.
[PASSWORD CHANGE]
Change the security password.
1) Press as to select [PASSWORD CHANGE].
2) Press the  button.
 fThe [PASSWORD CHANGE] screen is displayed.
3) Press asqw or number buttons (-) to set the password.
 fUp to eight button operations can be set.
4) Press the  button.
5) Re-enter the password for the confirmation.
6) Press the  button.
Note
 fThe entered password is displayed with "" mark on the screen. fAn error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password. fIf numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost. Consult your dealer for the initialization method.
82 - ENGLISH
Chapter 4   Settings - [SECURITY] menu  
						

							[TEXT DISPLAY]
Overlap the security message (text) over the projecting image.
1) Press as to select [TEXT DISPLAY].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]Disables the text display.
[ON]Enables the text display.
[TEXT CHANGE]
Change the text displayed when the text display is enabled by selecting [ON] in [TEXT DISPLAY].
1) Press as to select [TEXT CHANGE].
2) Press the  button.
 fThe [TEXT CHANGE] screen is displayed.
3) Press asqw to select the text, and press the  button to enter the text.
4) Press asqw to select [OK], and press the  button.
 fThe text is changed.
[MENU LOCK]
Display the menu with the  button, and set whether to enable menu \
operations.
1) Press as to select [MENU LOCK].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]Cancels the lock on menu operations.
[ON]Locks menu operation.
Note
 fAfter setting [MENU LOCK] to [ON], the  button cannot be operated if the incorrect password is input.
 f[MENU LOCK] is set to [OFF] at the time of purchase or when [INITIALIZE ALL] has been executed.
 fThe lock release is maintained until the projector enters standby.
[MENU LOCK PASSWORD]
Change the menu lock password.
1) Press as to select [MENU LOCK PASSWORD].
2) Press the  button.
 fThe [MENU LOCK PASSWORD] screen is displayed.
3) Press asqw to select the text, and press the  button to enter the text.
 fUp to 16 characters can be input.
4) Press asqw to select [OK], and press the  button.
 fTo cancel, select [CANCEL].
Attention
 fThe initial password is “AAAA” at the time of purchase or when [INITIALIZE  ALL] has been executed.
 fChange the password periodically that is hard to guess.
ENGLISH - 83
Chapter 4   Settings - [SECURITY] menu  
						

							[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press as to select [CONTROL DEVICE SETUP].
2) Press the  button.
 fThe [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select one item between [CONTROL PANEL] and [REMOTE CONTROLLER].
[CONTROL PANEL]You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER]You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE] and [DISABLE]. 
 fYou can set the limitation on the control from the control panel or the r\
emote control.
[ENABLE]Enable the button operations.
[DISABLE]Disable the button operations.
 fA confirmation screen will be displayed when you change [ENABLE] to [DISABLE].
5) Press qw to select [OK], and then press the  button.
Note
 fWhen a button operation is performed on the device set to [DISABLE] , the [PASSWORD] screen is displayed. 
To continue operations, enter the security password.
 fThe [PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
 fIf the operations of both [CONTROL PANEL] and [REMOTE CONTROLLER] are set to [DISABLE], the projector cannot be 
turned off (cannot enter standby).
 fEven when you set button operations on the remote control to be disabled\
, operations of the  and  
buttons on the remote control are enabled.
84 - ENGLISH
Chapter 4   Settings - [SECURITY] menu  
						

							[NETWORK/USB] menu
On the menu screen, select [NETWORK/USB] from the main menu, and select \
an item from the submenu.
Refer to "Navigating through the menu" (Æpage 54) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
Confirmation of the network information
When connecting the "Wireless Manager ME6.0", the dedicated application of iPad/iPhone/iPod touch/Android, 
or the Miracast-certified device to a projector, the information such as Network number of Wireless LAN, 
Projector name and ID are required. You can confirm the information in the input guide (as the following picture) 
or the network status (Æ page 91).
[WIRED LAN]
You can make detailed wired LAN settings.
1) Press as to select [WIRED LAN].
2) Press the  button.
 fThe [WIRED DETAILED SETUP] screen is displayed.
3) Press as to select an item, and change the setting according to the instructions\
.
[DHCP] 
[ON]:If a DHCP server exists in the network to which the projector is connected, 
the IP address will automatically be acquired.
[OFF]:If a DHCP server does not exist in the network to which the projector is 
connected, additionally set [IP ADDRESS], [SUBNET MASK] and  
[DEFAULT GATEWAY].
[IP ADDRESS] Enter the IP address if DHCP server is not used.
[SUBNET MASK]If not using a DHCP server, enter the subnet mask.
[DEFAULT GATEWAY]  Enter the gateway address if DHCP server is not used.
[DNS1]Enter the DNS server address if DHCP server is not used.
[DNS2]Enter the alternate DNS server address if DHCP server is not used.
[DETAILED] input guide
Network number of Wireless LAN
Projector name
ID
ENGLISH - 85
Chapter 4   Settings - [NETWORK/USB] menu  
						

							4) Press as to select [OK], and press the  button.
 rDefault wired LAN settings 
 fThe following settings are set before the projector leaves the factory.
[DHCP]OFF
[IP ADDRESS]1 9 2 .1 6 8 .1 0 .1 0 0
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]1 9 2 .1 6 8 .1 0 .1
[DNS1]/[DNS2]NONE
Note
 fBefore using the DHCP server, make sure the DHCP server is already functioning.
 fConsult your network administrator regarding the IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY.
 fA wired LAN and wireless LAN cannot be used in the same segment.
[WIRELESS LAN]
Set the connections of wireless LAN. 
1) Press as to select [WIRELESS LAN].
2) Press qw to select the connection method.
[DISABLE]When do not use the wireless LAN function.
[S-DIRECT]When use the wireless LAN function via the software "Wireless Manager ME6.0". For 
details, refer to the operating instructions of "Wireless Manager ME6.0".
[M-DIRECT]
Use this setting when the projector is used as a simple access point. 
Even if there is no access point, the connection is enabled when the Wireless 
Manager is installed in iPad/iPhone/iPod touch and Android, Windows/Mac.
[USER1]/[USER2]/[USER3]Sets the detailed setup of network.
Attention
 fIf you want to use the 5.2 GHz / 5.3 GHz band of IEEE802.11a, please do not use it outdoors. The outdoor using is 
prohibited by Radio Law.
Note
 fProjectors that can be connected to [S-DIRECT] or [M-DIRECT] are up to 10. 
 fWhen [WIRELESS LAN] is set to [S-DIRECT] or [M-DIRECT] and the input signal is other than [Panasonic  APPLICATION], 
the normal wireless connection is disabled.
[WIRELESS DETAILED SETUP]
You can configure more precise network settings, if you select [M-DIRECT] or [USER1]~[USER3] (user) for [WIRELESS 
LAN] in the network menu. For network settings, contact your network administrator.
Detailed setup of [M-DIRECT]
Use this setting when the projector is used as a simple access point. Even if there is no access point, you can still connect 
the projector to computer via the infrastructure.  
In addition, the connection with iPad / iPhone / iPod touch / Android is much easier. 
1) Press the  button when [M-DIRECT] is selected.
 fThe [WIRELESS DETAILED SETUP] screen is displayed.
2) Press as to select an item, and press qw to change the setting according to the instructions.
[IP ADDRESS]Enter the IP address.
[SUBNET MASK]Enter the subnet mask.
[SSID] Select M-DERECT in Wireless LAN, then the SSID can be set.
[CHANNEL]Select M-DERECT in Wireless LAN, then the Channel can be set. 
1 ~ 11
[KEY]
Select M-DERECT in Wireless LAN, then the KEY can be set.  
Setting a key for the access point. Input either 8 to 63 alphanumerics or a 64 digit 
string in the hexadecimal format.
3) Press as to select [OK], and press the  button.
 rDefault setting of [M-DIRECT] 
 fThe following settings are set before the projector leaves the factory.
86 - ENGLISH
Chapter 4   Settings - [NETWORK/USB] menu  
						

							[IP ADDRESS]1 9 2 .1 6 8 .12 .1 0 0
[SUBNET MASK]255.255.255.0
[SSID]M-DIRECT + The last 4 digits of 
the projector ID
[CHANNEL]1
[KEY]The same string as the SSID
Note
 fThe authentication method is WPA2-PSK, and the encryption method is AES. Both methods are fixed. fWhen you need to change initial configuration of [M-DIRECT], please contact your network administrator. fThe initial setting is [KEY], there is a risk that the leakage of information by a third party. Change the initial setting is necessary. fAs the DHCP server is already functioning, select [ON] before connecting a computer. fIt is possible to project the images which are stored in iPad / iPhone / iPod touch / Android and are sent to the projector by using the dedicated application. For more details, please refer to the following URL. 
http://panasonic.net/avc/projector/
Detailed setup of [USER1]/[USER2]/[USER3]
1) Press the  button when [USER1], [USER2] or [USER3] is selected.
 fThe [WIRELESS DETAILED SETUP 1/2] screen is displayed.
2) Press as to select an item, and press qw to change the setting according to the instructions.
[NAME CHANGE]You can change the projector name.
[DHCP] 
ON:If a DHCP server exists in the network to which the projector is connected, the 
IP address will automatically be acquired.
OFF:If a DHCP server does not exist in the network to which the projector is 
connected, additionally set [IP ADDRESS], [SUBNET MASK ] and [DEFAULT 
GATEWAY].
[IP ADDRESS] Enter the IP address if DHCP server is not used.
[SUBNET MASK]If not using a DHCP server, enter the subnet mask.
[DEFAULT GATEWAY]  Enter the gateway address if DHCP server is not used.
[DNS1]Enter the DNS server address if DHCP server is not used.
[DNS2]Enter the alternate DNS server address if DHCP server is not used.
Note
 fBefore using the DHCP server, make sure the DHCP server is already functioning.
 fFor details of IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY and DNS server, ask the network administrator.
 fA wired LAN and wireless LAN cannot be used in the same segment.
3) Press s.
 fThe [WIRELESS DETAILED SETUP 2/2] screen is displayed.
4) Press as to select the item and press asqw to change the setting according to the instructions.
[SSID] Enter the same character string that are registered in the access point.\
[AUTHENTICATION]Set the user authentication method used by the network to be connected.
[ENCRYPTION]Select the encryption method to be used for communication between the pr\
ojector and the network.
 r[AUTHENTICATION] setting
[OPEN]Select when the access point authentication method is Open System.
[SHARED]Select when the access point authentication method is Shared Key.
[ W PA - PS K ]Select when the access point authentication method is WPA-PSK.
[ W PA 2- PS K ]Select when the access point authentication method is WPA2-PSK.
[ W PA - E A P/ W PA 2- E A P ]Select when the access point authentication method is WPA-EAP/ WPA2-EAP.
[ W PA - E A P ]Select when the access point authentication method is WPA-EAP.
[ W PA 2- E A P ]Select when the access point authentication method is WPA2-EAP.
ENGLISH - 87
Chapter 4   Settings - [NETWORK/USB] menu  
						

							 r[ENCRYPTION] setting
[NONE]Select when transmit without encryption. It is selectable only when 
[AUTHENTICATION] is [OPEN] or [SHARED].
[WEP]Select when Encryption is WEP.
[TKIP] 
Select when Encryption is TKIP.
Selectable when [AUTHENTICATION] is either [WPA-PSK], [WPA2-PSK],  
[WPA-EAP], [WPA2-EAP].
[AES] 
Select when Encryption is AES.
Selectable when [AUTHENTICATION] is either [WPA-PSK], [WPA2-PSK],  
[WPA-EAP], [WPA2-EAP].
 rWhen setting [OPEN] or [SHARED] as authentication and setting [WEP] as t\
he encryption method:
[DEFAULT KEY]Set 1 – 4 numerals for the default key.
[KEY1-KEY4]
Set a [WEP] key to the key number selected with [DEFAULT KEY].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input 5 
alphanumerics (or a 10-digit string for the hexadecimal format) for the 128-bit key, 
input 13 alphanumerics (or a 26-digit string for the hexadecimal format).
 rWhen setting [WPA-PSK] or [WPA2-PSK] as authentication method:
[KEY]Set a key. Input either 8 to 63 alphanumerics or a 64 digit string in the 
hexadecimal format.
 rWhen the authentication method is [WPA-EAP/WPA2-EAP], [WPA-EAP], [WPA2-EAP]:
[EAP]
Select the EAP setup in the R ADIUS server. Types of EAP that can be selected are 
as follows.
PEAP (MS-CHAPv2), PEAP (GTC), EAP-TTLS (MD5), EAP-TTLS (MS-CHAPv2 ), 
EAP-FAST (MS-CHAPv2), EAP-FAST (GTC)
[USE NAME]Input a user name used for authentication (excluding spaces) (maximum 64 
characters).
[PASSWORD]Input a password used for authentication (maximum 64 characters).
Note
 fIf you are unable to connect to the wireless LAN through the access poin\
t even after performing the steps in "Projector 
settings" (Æ page 93), contact the manufacturer of the access point (Radio repeater).
 fWhen using EAP, the projector needs to be set according to the setting of the RADIUS server. Check with the network 
administrator for the setting of the RADIUS server.
 fWhen using an EAP together with an access point with invalid SSID broadcast, select WAP-EAP or WAP2-EAP for the 
authentication method even if the authentication method of the access point is WPA-EAP/WPA2-EAP. fIf USER1 ~ 3 use, you can not connect to the access point of stealth SSID configuration, please use it to cancel the stealth setting. For details, please refer to the Operating Instructions of the access point.
5) Press as to select [OK], and press the  button.
 rDefault setting of [USER1], [USER2], [USER3]
 fThe following settings are set before the projector leaves the factory.
[SSID]Panasonic Projector
[DHCP]OFF
[IP ADDRESS]1 9 2 .1 6 8 .11.1 0 0
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]1 9 2 .1 6 8 .11.1
[AUTHENTICATION]OPEN
[ENCRYPTION]NONE
[CHANNEL]11
[DNS1]/[DNS2]NONE
88 - ENGLISH
Chapter 4   Settings - [NETWORK/USB] menu  
						

							[CONNECTION LOCK]
Switches the network signal or chooses one fixed signal.
1) Press as to select [CONNECTION LOCK].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]The [NETWORK/USB] input signal can be switched between [Panasonic APPLICATION], 
[Miracast(TM)] and [MEMORY VIEWER].
[Panasonic APPLICATION]The [Panasonic APPLICATION] is the fixed [NETWORK/USB] input signal.
[Miracast(TM)]The [Miracast(TM)] is the fixed [NETWORK/USB] input signal.
[MEMORY VIEWER]The [MEMORY VIEWER] is the fixed [NETWORK/USB] input signal.
Note
 fIf [CONNECTION LOCK] is set to one fixed item other than [OFF] and you press other buttons, the [KEY  NOT APPLICABLE]  
appears. 
[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
1) Press as to select [NAME CHANGE].
2) Press the  button.
 fThe [NAME CHANGE] screen is displayed.
3) Select characters with the asqw buttons and press the  button to enter the projector name. 
 fSelect [ALL DELETE] to delete all the entered characters, or press the  button on the remote control to 
delete a character on the cursor in the entry field.
4) Select [OK] with the as buttons and press the  button. 
 fTo cancel the change of the name, select [CANCEL] and press the  button.
Note
 f[Name ØØØØ] (ØØØØ
is 4-digit number) is set before the projector leaves the factory.
[PASSWORD]
By controlling connection with password setting, it is possible to prevent an external device from accidentally connecting and 
interrupting projection images, etc.
1) Press as to select [PASSWORD].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[ON]Enables the enter of network password.
[OFF]Disables the enter of network password.
Note
 fSet to [ON] to perform password check when connecting with the projector using “Wireless Manager ME6.0”.  
(Default: [OFF])
 fWhen using the deliver image to all function or the delivered image deletion function of the “Multi Projector Monitoring & 
Control Software”, image cannot be delivered to the projector with password setting set to [ON]. To use these image delivery 
functions, set it to [OFF].
[PASSWORD CHANGE]
1) Press as to select [PASSWORD CHANGE].
2) Press the  button.
 fThe [PASSWORD CHANGE] screen is displayed.
3) Press asqw to set the password.
4) Press as to select [OK], and press the  button.
Note
 fYou can enter 8 characters at most.
 fChange the password periodically that is hard to guess.
ENGLISH - 89
Chapter 4   Settings - [NETWORK/USB] menu  
						

							[NETWORK CONTROL]
Set when you want to control the projector from a computer connected to the network.
1) Press as to select [NETWORK CONTROL].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[ON]This function is enabled. WEB control, PJLink control, the command control of the LAN are 
enabled.
[OFF]This function is disabled.
[AMX D. D.]
Set to [ON] to control with the controller of AMX Corporation.
Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to the website of AMX 
Corporation.
URL http://www.amx.com/
1) Press as to select [AMX D. D.].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[ON]This function is enabled.
[OFF]This function is disabled.
[Crestron Connected(TM)]
Set to [ON] to control with Crestron Connected™ of Crestron Electronics, Inc.
1) Press as to select [Crestron Connected(TM)].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[ON]This function is enabled.
[OFF]This function is disabled.
[LIVE MODE CUT IN]
Set this [ON] to allow interrupt of the Live mode by other users, or to allow delivery of images by the “Multi Projector Monitoring 
& Control Software”, while the Live mode is active (sending image) by the “Wireless Manager ME6.0”.
1) Press as to select [LIVE MODE CUT IN].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[ON]This function is enabled.
[OFF]This function is disabled.
Note
 fIf you use the “Wireless Manager ME6.0” and the “Multi Projector Monitoring & Control Software” on the same computer at 
the same time, the function of delivering image to all may not be availa\
ble. If you want to use them at the same time, please 
use another computer with respective software.
[MULTI-LIVE]
Switch to the Multi-live mode when using the “Wireless Manager ME6.0”. For details, refer to "Wireless Manager ME6.0" 
operating instructions. You can also use the application that is used for iOS or Android.
1) Press as to select [MULTI-LIVE].
2) Press the  button.
 fTo switch the multi mode.
 fThe items will switch each time you press the button. 
4-screen multi style → 4-screen index style → 16-screen index style  → 4-screen multi style →...
90 - ENGLISH
Chapter 4   Settings - [NETWORK/USB] menu