Panasonic LCD Projector Pt Vw345NZ Operating Instructions

							[MEMORY VIEWER]
Change the setting of MEMORY VIEWER.
1) Press as to select [MEMORY VIEWER].
2) Press the  button.
 fThe [MEMORY VIEWER] screen is displayed.
3) Press as to select one item, and press qw to set the selected item.
 fThe items will switch each time you press the button.
[VIEW]Switches the display method between [THUMBNAIL] and [LIST].
[SORT]Sorts in order of [NAME], [TIME] or [TYPE].
[AUTOPLAY]It is set to [ON] when the auto play is enabled.
[INTERVAL]The interval of auto play can be set to [5 S], [10 S], [15 S], [30 S], [60 S] or [120 S].
[EFFECT]
When switches the screen, the effect can be set to [OFF], [RANDOM], [WIPE LEFT], [WIPE 
RIGHT], [WIPE DOWN], [SPLIT], [FADE], [BLIND], [CHECKER WIPE], [SLIDE IN] or [SLIDE 
OUT].
[GUIDE]It is set to [ON] when the guide is displayed.
Note
 fFor details about [MEMORY VIEWER] refer to "Memory viewer function" (Æpages 110 -113).
[STATUS]
Displays the current network status.
1) Press as to select [STATUS].
2) Press the  button.
 fThe [STATUS] screen (WIRED LAN 1/3) is displayed.
3) Press as to switch between the screen (WIRED LAN 1/3 → WIRELESS LAN 2/3 → WIRELESS LAN 3/3).
Note
 fWhen [WIRELESS LAN] is set to [DISABLE], WIRELESS LAN 2/3 and WIRELESS LAN 3/3 screen will not be displayed.
[INITIALIZE]
This function is used to return various setting values of [NETWORK/USB] to the factory default value.
1) Press as to select [INITIALIZE].
2) Press the  button.
 fThe [INITIALIZE] screen is displayed.
3) Press qw to select [OK] and then press the  button.
Network connections
The projector has a network function, and the following operations are a\
vailable from the computer using the web browser 
control.
 fSetting and adjustment of the projector.
 fDisplay of the projector status.
 fTransmission of an E-mail message when there is a problem with the projector.
The projector supports "Crestron Connected™", and the following appli\
cation software of Crestron Electronics, Inc. can be 
used.
 fRoomView Express
 fFusion RV
 fRoomView Server Edition
Attention
 fWhen a LAN cable is directly connected to the projector, the network connection must be made indoors.
ENGLISH - 91
Chapter 4   Settings - [NETWORK/USB] menu  
						

							Note
 f"Crestron Connected™" is a system developed by Crestron Electronics, Inc. which collectively manage and control multiple 
system devices connected via the network, from a computer. This projector supports "Crestron Connected™".
 fFor details of "Crestron Connected™", refer to the Crestron Electronics, Inc. website. (Provided only in English.). 
http://www.crestron.com/ 
For the download of "RoomView Express", refer to the Crestron Electronics, Inc. website. (Provided only in English.). 
http://www.crestron.com/getroomview
 fA LAN cable is required to use the wired LAN function.
 rExample of a wired LAN network connection
 
 fA Web browser is required to use this function. Confirm that the Web browser can be used beforehand. 
Compatible OS : Windows XP/Windows Vista/Windows 7/Windows 8, Mac OS X v10.4/v10.5/v10.6/v10.7/v10.8 
Compatible Web Browser : Internet Explorer 7.0/8.0/9.0/10.0, Safari 4.0/5.0/6.0 (Mac OS)
 fCommunication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used 
beforehand.
 fUse shielded LAN cable (STP cable) that is compatible with category 5 or above.
 fUse a LAN cable with length of 100 m or shorter.
 rExample of a wireless LAN network connection
Miracast(TM)Panasonic APPLICATION
Connection image
 Projector
Miracast
Miracast-certified device
(Example) Copyright protection content display Projector
(Example) Multi-screen display
iPad/iPhone/iPod touch, Android mobile terminal and computer  which are installed with the Wireless Manager
Communication methodIEEE802.11nIEEE802.11n
Connection methodWPS + Wi-Fi DirectPanasonic proprietary + User connections
Video transmission methodMiracastPanasonic proprietary
Computer
Projector
LAN cable (straight)LAN cable (straight)
Hub
92 - ENGLISH
Chapter 4   Settings - [NETWORK/USB] menu  
						

							Connecting with Wired LAN
Projector settings
1) Use the LAN cable (Straight) to connect the projector with computer.
2) Turn on the projector.
3) Press the  button to display the [NETWORK/USB] menu, and then select [WIRED LAN], and 
press  button.
4) Set the detailed setup of [WIRED LAN].
For details, see “WIRED LAN” (Æpage 85).
Note
 fPlease confirm with your network administrator before you connect to an existing network. fThe following settings are set before the projector leaves the factory.
[DHCP]OFF
[IP ADDRESS]1 9 2 .1 6 8 .1 0 .1 0 0
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]1 9 2 .1 6 8 .1 0 .1
[DNS1]/[DNS2]NONE
Computer operation
Connection can be made with wired LAN. However, confirm to your system administrator on network settings before chang-ing any settings.
1) Turn on the computer.
2) Make the network setting according to your system administrator.
 fIf the projector settings are the default settings (Æpage 85), the computer can be used with the following network settings.
[IP ADDRESS]1 9 2 .1 6 8 .1 0 .1 0 1
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]1 9 2 .1 6 8 .1 0 .1
Connecting with Wireless LAN
Projector settings
1) Turn on the projector.
2) Press the  button to display the [NETWORK/USB] menu, and then sele\
ct [M-DIRECT], or 
[USER1] ~ [USER3] for [WIRELESS LAN].
3) According to the network number selected in step 2, set the detailed set\
up of [WIRELESS DETAILED 
SETUP].
 fFor details, see “WIRELESS DETAILED SETUP” (Æpage 86-88). 
Note
 fWireless LAN and wired LAN cannot be used in the same segment.
 fWhen multiple devices are connected, a unique IP ADDRESS must be allocated to each device.
 fSSID has to be entered in alphanumeric letters.
 fYou cannot set “any” or “ANY” for SSID.
 fThe projector settings are not required when Miracast is connected. For details about Miracast, please refer to 
page 113.
 fThe following settings are set before the projector leaves the factory.
[M-DIRECT]
[IP ADDRESS]1 9 2 .1 6 8 .12 .1 0 0
[SUBNET MASK]255.255.255.0
[SSID]M-DIRECT + The last 4 digits of the projector ID
[CHANNEL]1
[KEY]The same string as the SSID
ENGLISH - 93
Chapter 4   Settings - [SECURITY] menu  
						

							[USER1] ~ [USER3]
[SSID]Panasonic Projector
[DHCP]OFF
[IP ADDRESS]1 9 2 .1 6 8 .11.1 0 0
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]1 9 2 .1 6 8 .11.1
[AUTHENTICATION]OPEN
[ENCRYPTION]NONE
[CHANNEL]11
[DNS1]/[DNS2]NONE
Computer operation
1) Make the network setting according to your system administrator.
 fIf you select [M-DIRECT] for [WIRELESS LAN] in the network menu, the IP  address will automatically be acquired.
 fIf you select default settings of [USER1] ~ [USER3] for [WIRELESS LAN] in the network menu (Æpage 88), then the 
computer can be used with the following network settings.
[IP ADDRESS]1 9 2 .1 6 8 .11.1 0 1
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]1 9 2 .1 6 8 .11.1
2) Connect the computer to the network that has been set for the projectors\
.
 fClick  on the task tray (bottom right of the Window screen), and select the same name as SSID that has been set in 
the projector.
 fWhen you select default settings of [M-DIRECT] for [WIRELESS LAN] in the network menu, the SSID is [M-DIRECT + 
The last 4 digits].  
When you select default settings of [USER1] ~[USER3] for [WIRELESS LAN] in the network menu, the SSID is 
[Panasonic Projector].
                                                        [M-DIRECT]                        [USER1] ~ [USER3]
Note
 fIf you use any wireless utility other than Windows [Wireless Network Connection], follow its operation procedure for 
connection.
 fIf you use the access point, configure the computer and each network setting of the projector following the instruction of the 
network administrator.
94 - ENGLISH
Chapter 4   Settings - [SECURITY] menu  
						

							Accessing from the Web browser
1) Activate the Web browser in the personal computer.
2)  Enter the IP address set by the projector into the URL input field of the Web browser.
3) Enter your “User name” and “Password”.
 fThe factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is 
panasonic (lower case).
4) Click [OK] to display the Projector status page.
 f[Projector status] page is displayed.
Note
 fIf you use a web browser to control the projector, set [NETWORK CONTROL] to [ON] in [NETWORK/USB] (Æpage 90). 
 fDo not perform setting or control simultaneously by starting up multiple\
 web browsers. Do not set or control the projector 
from multiple computers.
 fChange the password first. (Æpage 105)
 fThe administrator rights allow use of all functions. The user rights allow use of [Projector status] (Æ page 96), confirmation 
of the error information page (Æ page 97), [Network status] (Æ page 98), [Basic control] (Æ page 98), [Advanced control] 
(Æ page 99), and [Change password] (Æ page 105) only.
 fAccess will be locked for few minutes when an incorrect password is ente\
red three times consecutively.
 fSome items on the projector setting page use the Javascript function of \
the web browser. The projector may not be able to 
be controlled properly if it is set with a browser that does not have th\
is function enabled.
 fIf the screen for the web control is not displayed, consult your network\
 administrator.
 fWhile updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.
ENGLISH - 95
Chapter 4   Settings - [SECURITY] menu  
						

							Description of each item 
1
2
3
4
5
6
1 Page tabSwitches pages by clicking this item.
2 [Status]The status of the projector is displayed by clicking this item.
3 [Projector control]The [Projector control] page is displayed by clicking this item.
4 [Detailed set up]The [Detailed set up] page is displayed by clicking this item.
5 [Change password]The [Change password] page is displayed by clicking this item.
6 [Crestron Connected(TM)]The control page of Crestron Connected™ is displayed by clicking this item.
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
13
14
15 5
6
7
8
1
2
3
4
9
10
11
12
1 [PROJECTOR TYPE]Displays the type of projector.
2 [MAIN VERSION]Displays the firmware version of the projector.
3 [POWER]Displays the status of the power.
4 [PICTURE MODE]Displays the status of the picture mode.
5 [SERIAL NUMBER]Displays the serial number of the projector.
6 [NETWORK VERSION]Displays the version of firmware of the network.
7 [AV MUTE]Displays the AV mute status.
8 [VOLUME]Displays the volume status.
9 [INPUT]Displays the status of the selected input.
10 [INTAKE AIR TEMPERATURE]Displays the status of the air intake temperature of the projector.
11 [EXHAUST AIR TEMPERATURE]Displays the status of the exhaust air temperature of the projector.
12 [OPTIC MODULE TEMPERATURE]Displays the optics module temperature status of the projector.
13 [LAMP RUNTIME]Displays the runtime of the lamp (converted value).
14 [SELF TEST]Displays the self diagnostics information. 
15 [PROJECTOR RUNTIME]Displays the runtime of the projector.
96 - ENGLISH
Chapter 4   Settings - [SECURITY] menu  
						

							Error information page 
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to 
display the error/warning details.
 fThe projector may go into the standby status to protect the projector de\
pending on the contents of the error.
1
1 Self-diagnosis result display
Displays the item check results.
[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.
[WARNING]: Indicates that there is a warning.
 r[FAILED] items displayed when a problem occurs
ParameterDescription
[FAN]Trouble has occurred in the fan or its drive circuit. Consult your dealer\
.
[FAN(INTAKE)]Trouble has occurred in the intake fan.
[FAN(EXHAUST)]Trouble has occurred in the exhaust fan.
[FAN(LAMP)]Trouble has occurred in the lamp cooling fan.
[INTAKE AIR TEMPERATURE]The air intake temperature is too high. The projector may be used in an operating environment where the temperature is high, such as near a heating applia\
nce.
[EXHAUST AIR TEMPERATURE]The exhaust air temperature is high. The air exhaust port may be blocked.
[OPTICS MODULE TEMPERATURE]The temperature around the optics module inside the projector is high. The projec-tor may be used in an operating environment where the temperature is hig\
h, such as near a heating appliance.
[LAMP REMAIN TIME]The lamp runtime has exceeded the prescribed cumulative time, and it is now time to replace the lamp.
[LAMP STATUS]The lamp has failed to light.Wait a short while for the lamp to cool off, and then turn on the power.
[APERTURE (CONTRAST-SHUT-TER)]Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
[AIR FILTER]There is too much dust accumulated in the air filter unit. Turning off the projector and clean the air filter unit.
ENGLISH - 97
Chapter 4   Settings - [SECURITY] menu  
						

							[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
2
1
1 [WIRELESS LAN]Displays the configuration details of wireless LAN.2 [WIRED LAN]Displays the configuration details of wired LAN.
[Basic control] page 
Click [Projector control] → [Basic control].
1
2
5
6 3
4
1 [INPUT]Switches the input signal.
2 [VOLUME]Adjusts the volume level.
3 [PICTURE MODE]Switches the picture mode.
4 [AV MUTE]Switches between AV mute on/off.
5 [POWER]Turns on/off the power.
6 [CLOSED CAPTION]Switches the closed caption mode.
Note
 fAfter selecting [NETWORK/USB] in [INPUT], it will select the previous input source. If you need to select the other, please 
press the  /  /  button on the remote control.
98 - ENGLISH
Chapter 4   Settings - [SECURITY] menu  
						

							[Advanced control] page
Click [Projector control] → [Advanced control].
1
2
1 [POSITION]Adjusts the position of image and the keystone correction.
2 [PICTURE]Adjusts the items of image.
[Network config] page
Click [Detailed set up] → [Network config].
 fClick [Network config] to display the [CAUTION!] screen.
 fThe current settings are displayed by pressing the [Next] button.
 fClick [Change] to display the setting change screen.
Wired LAN
1
2
3
4
5
6
1 [DHCP ON]/[DHCP OFF]To enable the DHCP client function, set to [DHCP ON].
2 [IP ADDRESS]Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]Enter the default gateway address when not using a DHCP server.
5 [DNS1]/[DNS2]Enter the DNS1/DNS2 server address.Permissible/ available characters for the entry of DNS1/DNS2 server address.(primary):Numbers (0 - 9), period (.)(Example: 192.168.0.253).
6 [Back]/[Next]Click the [Back] button to return to the original screen. The current settings are displayed by pressing the [Next] button.Click the [Submit] button to update the settings.
Note
 fWhen you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In 
that case, click [Network config] again since the following operation will not be guaranteed.
 fChanging LAN settings while connected to the LAN may cause the connectio\
n to cut out.
ENGLISH - 99
Chapter 4   Settings - [SECURITY] menu  
						

							Wireless LAN (M-DIRECT)
1
2
3
4
5
6
1 [IP ADDRESS]Enter the IP address.
2 [SUBNET MASK]Enter the subnet mask.
3 [SSID]Set the SSID to be used in M-DIRECT.
4 [CHANNEL]Set the channel to be used in M-DIRECT. 
5 [KEY]Set the key to be used in M-DIRECT.Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
6 [Back]/[Next]Click the [Back] button to return to the original screen. The current settings are displayed by pressing the [Next] button.Click the [Submit] button to update the settings.
Wireless LAN (USER 1~USER 3)
1
2
3
4
5
6
7
8
9
10
7
7
1 [DHCP ON]/[DHCP OFF]To enable the DHCP client function, set to [DHCP ON].
2 [IP ADDRESS]Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]Enter the default gateway address when not using a DHCP server.
5 [DNS1]/[DNS2]Enter the preferred DNS/alternate DNS server when not using a DHCP server.
6 [SSID]Enter the same character string that are registered in the access point.
7 [Back]/[Next]Click the [Back] button to return to the original screen. 
The current settings are displayed by pressing the [Next] button.Click the [Submit] button to update the settings.
8 [AUTHENTICATION]Set the user authentication method used by the network to be connected.
9 [EAP]Select the EAP setup in the RADIUS server.
10 [ENCRYPTION]Select the encryption method to be used for communication between the projector and the network.
Note
 fThe screen items will change according to the authentication method of w\
ireless LAN which is connected.
100 - ENGLISH
Chapter 4   Settings - [SECURITY] menu