Panasonic LCD Projector Pt Vw345NZ Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Vw345NZ Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 121
![Page 121
FA Q
Please refer to the following items if you have problems with the wirele\
ss LAN connection.
The wireless LAN connection is interrupted suddenly.
fThe picture may be distorted by the radio wave environment. In such case\
s, please try the following measures. - Please make the wireless LAN connection device close to the projector. - Place away from devices that can emit electromagnetic radiation, such as microwave ovens, game machines. Do not use these devices if you are still unable to solve the...](http://img.usermanuals.tech/thumb/58/76002/w300_pt-vw345_en_om_d-120.png "Page 121
FA Q
Please refer to the following items if you have problems with the wirele\
ss LAN connection.
The wireless LAN connection is interrupted suddenly.
fThe picture may be distorted by the radio wave environment. In such case\
s, please try the following measures. - Please make the wireless LAN connection device close to the projector. - Place away from devices that can emit electromagnetic radiation, such as microwave ovens, game machines. Do not use these devices if you are still unable to solve the...")
FA Q Please refer to the following items if you have problems with the wirele\ ss LAN connection. The wireless LAN connection is interrupted suddenly. fThe picture may be distorted by the radio wave environment. In such case\ s, please try the following measures. - Please make the wireless LAN connection device close to the projector. - Place away from devices that can emit electromagnetic radiation, such as microwave ovens, game machines. Do not use these devices if you are still unable to solve the...
Page 122
Chapter 6 Appendix This chapter describes specifications and after-sales service for the projector. 122 - ENGLISH
Page 123
![Page 123
Technical Information
PJLink protocol
The network function of the projector supports PJLink class 1, and the P\
JLink protocol can be used to perform projector setting
and projector status query operations from a computer.
Control commands
The following table lists the PJLink protocol commands that can be used \
to control the projector.
fx characters in tables are non-specific characters.
CommandControl detailsParameter / return stringRemark
POWRPower supply control0
1
Standby
Power on
POWR ?Power...](http://img.usermanuals.tech/thumb/58/76002/w300_pt-vw345_en_om_d-122.png "Page 123
Technical Information
PJLink protocol
The network function of the projector supports PJLink class 1, and the P\
JLink protocol can be used to perform projector setting
and projector status query operations from a computer.
Control commands
The following table lists the PJLink protocol commands that can be used \
to control the projector.
fx characters in tables are non-specific characters.
CommandControl detailsParameter / return stringRemark
POWRPower supply control0
1
Standby
Power on
POWR ?Power...")
Technical Information PJLink protocol The network function of the projector supports PJLink class 1, and the P\ JLink protocol can be used to perform projector setting and projector status query operations from a computer. Control commands The following table lists the PJLink protocol commands that can be used \ to control the projector. fx characters in tables are non-specific characters. CommandControl detailsParameter / return stringRemark POWRPower supply control0 1 Standby Power on POWR ?Power...
Page 124
![Page 124
Control commands via LAN
When WEB Control administrator rights password is set (Protect mode)
Connection method
1) Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and make a request
for connection to the projector.
fAcquire the IP address from the menu screen of the projector, and the port number from the WEB control page.
IP address :Obtain from MAIN MENU → [NETWORK/USB] → [STATUS]
Port No. :Acquire from the WEB control → [Detailed set up] → [Port set up] page
2)...](http://img.usermanuals.tech/thumb/58/76002/w300_pt-vw345_en_om_d-123.png "Page 124
Control commands via LAN
When WEB Control administrator rights password is set (Protect mode)
Connection method
1) Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and make a request
for connection to the projector.
fAcquire the IP address from the menu screen of the projector, and the port number from the WEB control page.
IP address :Obtain from MAIN MENU → [NETWORK/USB] → [STATUS]
Port No. :Acquire from the WEB control → [Detailed set up] → [Port set up] page
2)...")
Control commands via LAN When WEB Control administrator rights password is set (Protect mode) Connection method 1) Obtain the IP address and port number (Initial set value = 1 024) of the projector \ and make a request for connection to the projector. fAcquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address :Obtain from MAIN MENU → [NETWORK/USB] → [STATUS] Port No. :Acquire from the WEB control → [Detailed set up] → [Port set up] page 2)...
Page 125
![Page 125
When WEB Control administrator rights password is not set (Non-protect \
mode)
Connection method
1) Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and make a request
for connection to the projector.
fAcquire the IP address from the menu screen of the projector, and the port number from the WEB control page.
IP address :Obtain from main menu → [NETWORK/USB] → [STATUS]
Port No. :Acquire from the WEB control → [Detailed set up] → [Port set up] page
2) There is a...](http://img.usermanuals.tech/thumb/58/76002/w300_pt-vw345_en_om_d-124.png "Page 125
When WEB Control administrator rights password is not set (Non-protect \
mode)
Connection method
1) Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and make a request
for connection to the projector.
fAcquire the IP address from the menu screen of the projector, and the port number from the WEB control page.
IP address :Obtain from main menu → [NETWORK/USB] → [STATUS]
Port No. :Acquire from the WEB control → [Detailed set up] → [Port set up] page
2) There is a...")
When WEB Control administrator rights password is not set (Non-protect \ mode) Connection method 1) Obtain the IP address and port number (Initial set value = 1 024) of the projector \ and make a request for connection to the projector. fAcquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address :Obtain from main menu → [NETWORK/USB] → [STATUS] Port No. :Acquire from the WEB control → [Detailed set up] → [Port set up] page 2) There is a...
Page 126
![Page 126
Serial terminal
The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that
the projector can be controlled by a personal computer which is connecte\
d to this connector.
Connection
Pin assignments and signal names
D-Sub 9-pin (female)
Outside viewPin No.Signal nameContents
—NC
TXDTransmitted data
RXDReceived data
—NC
GNDEarth
—NC
CTSConnected internallyRTS
—NC
Communication conditions
Signal levelRS-232C-compliant
Sync....](http://img.usermanuals.tech/thumb/58/76002/w300_pt-vw345_en_om_d-125.png "Page 126
Serial terminal
The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that
the projector can be controlled by a personal computer which is connecte\
d to this connector.
Connection
Pin assignments and signal names
D-Sub 9-pin (female)
Outside viewPin No.Signal nameContents
—NC
TXDTransmitted data
RXDReceived data
—NC
GNDEarth
—NC
CTSConnected internallyRTS
—NC
Communication conditions
Signal levelRS-232C-compliant
Sync....")
Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connecte\ d to this connector. Connection Pin assignments and signal names D-Sub 9-pin (female) Outside viewPin No.Signal nameContents —NC TXDTransmitted data RXDReceived data —NC GNDEarth —NC CTSConnected internallyRTS —NC Communication conditions Signal levelRS-232C-compliant Sync....
Page 127
Basic format Transmission from the computer starts with STX, then the ID, command, parameter, and ETX are sent in this order. Add parameters according to the details of control. STXAD I1I2 ;C1C2 C3 : P1 P2Pn ETX * When sending commands without parameters, a colon (:) is not necessary . Basic format (with sub command) S1S2S3S4S5 EP1P2P3P4P5P6 STX AD I1I2 ;C1C2C3 : ETX Same as basic format Sub command (5 bytes) Operation (1 byte) “=” (Value specified using parameter is set)Parameter (6 bytes)* Symbol “+”...
Page 128
![Page 128
Cable specifications
[When connected to a computer]
Projector
( terminal)
1NCNC1
Computer
(DTE specifications)
22334NCNC4556NCNC677889NCNC9
Control commands
When controlling the projector from a computer, the following commands are available.
rProjector control command
CommandControl contentsParameter / return stringRemarks
PONPower on―To check if the power is on, use the “Power
query” command.POFPower off
IISINPUT selection
VID
SVD
RG1
RG2
HD1
NWP
PA 1
MG1
MV1
VIDEO
S-VIDEO
RGB1
RGB2
HDMI
NETWORK...](http://img.usermanuals.tech/thumb/58/76002/w300_pt-vw345_en_om_d-127.png "Page 128
Cable specifications
[When connected to a computer]
Projector
( terminal)
1NCNC1
Computer
(DTE specifications)
22334NCNC4556NCNC677889NCNC9
Control commands
When controlling the projector from a computer, the following commands are available.
rProjector control command
CommandControl contentsParameter / return stringRemarks
PONPower on―To check if the power is on, use the “Power
query” command.POFPower off
IISINPUT selection
VID
SVD
RG1
RG2
HD1
NWP
PA 1
MG1
MV1
VIDEO
S-VIDEO
RGB1
RGB2
HDMI
NETWORK...")
Cable specifications [When connected to a computer] Projector ( terminal) 1NCNC1 Computer (DTE specifications) 22334NCNC4556NCNC677889NCNC9 Control commands When controlling the projector from a computer, the following commands are available. rProjector control command CommandControl contentsParameter / return stringRemarks PONPower on―To check if the power is on, use the “Power query” command.POFPower off IISINPUT selection VID SVD RG1 RG2 HD1 NWP PA 1 MG1 MV1 VIDEO S-VIDEO RGB1 RGB2 HDMI NETWORK...
Page 129
![Page 129
Two window display combination list
Sub Window
COMPUTER1COMPUTER2
HDMIVIDEOS-VIDEO
Main WindowRGBYCBCR/YPBPRRGB
COMPUTER1RGB―――l――
YCBCR/YPBPR―――l――
COMPUTER2RGB―――l――
HDMIlll―ll
VIDEO―――l――
S-VIDEO―――l――
l : Picture in Picture combinations are enabled.
―: Picture in Picture combinations are disabled.
Note
f[MEMORY VIEWER], [Miracast(TM)] and [Panasonic APPLICATION] do not support two window display function.
fWhen setting the movie-based signal 1080/24p, 1080/24sF,1080/25p, 1080/30p, 1080/50p or...](http://img.usermanuals.tech/thumb/58/76002/w300_pt-vw345_en_om_d-128.png "Page 129
Two window display combination list
Sub Window
COMPUTER1COMPUTER2
HDMIVIDEOS-VIDEO
Main WindowRGBYCBCR/YPBPRRGB
COMPUTER1RGB―――l――
YCBCR/YPBPR―――l――
COMPUTER2RGB―――l――
HDMIlll―ll
VIDEO―――l――
S-VIDEO―――l――
l : Picture in Picture combinations are enabled.
―: Picture in Picture combinations are disabled.
Note
f[MEMORY VIEWER], [Miracast(TM)] and [Panasonic APPLICATION] do not support two window display function.
fWhen setting the movie-based signal 1080/24p, 1080/24sF,1080/25p, 1080/30p, 1080/50p or...")
Two window display combination list Sub Window COMPUTER1COMPUTER2 HDMIVIDEOS-VIDEO Main WindowRGBYCBCR/YPBPRRGB COMPUTER1RGB―――l―― YCBCR/YPBPR―――l―― COMPUTER2RGB―――l―― HDMIlll―ll VIDEO―――l―― S-VIDEO―――l―― l : Picture in Picture combinations are enabled. ―: Picture in Picture combinations are disabled. Note f[MEMORY VIEWER], [Miracast(TM)] and [Panasonic APPLICATION] do not support two window display function. fWhen setting the movie-based signal 1080/24p, 1080/24sF,1080/25p, 1080/30p, 1080/50p or...
Page 130
List of compatible signals The following table specifies the type of signals compatible with the projectors. fSymbols that indicate formats are as follows. V = VIDEO, S = S-VIDEO, C = RGB, Y = YCBCR/YPBPR, H = HDMI ModeDisplay resolution(dots) Scanning frequencyDot clock frequency (MHz)Format*1 PnP*2 H (kHz)V (Hz)COMPUTER1/ COMPUTER2HDMI NTSC/NTSC4.43/ PAL-M/PAL60720 x 480i15.759.9―V/S―― PAL/PAL-N/SECAM720 x 576i15.650.0―V/S―― 525i (480i)720 x 480i15.759.913.5C/Y―― 625i (576i)720 x...