Panasonic LCD Projector Pt Vw345NZ Operating Instructions

[MEMORY VIEWER]
Change the setting of MEMORY VIEWER.
1) Press as to select [MEMORY VIEWER].
2) Press the  button.
 fThe [MEMORY VIEWER] screen is displayed.
3) Press as to select one item, and press qw to set the selected item.
 fThe items will switch each time you press the button.
[VIEW]Switches the display method between [THUMBNAIL] and [LIST].
[SORT]Sorts in order of [NAME], [TIME] or [TYPE].
[AUTOPLAY]It is set to [ON] when the auto play is enabled.
[INTERVAL]The interval of auto play can be set to...

Note
 f"Crestron Connected™" is a system developed by Crestron Electronics, Inc. which collectively manage and control multiple 
system devices connected via the network, from a computer. This projector supports "Crestron Connected™".
 fFor details of "Crestron Connected™", refer to the Crestron Electronics, Inc. website. (Provided only in English.). 
http://www.crestron.com/ 
For the download of "RoomView Express", refer to the Crestron Electronics, Inc. website....

Connecting with Wired LAN
Projector settings
1) Use the LAN cable (Straight) to connect the projector with computer.
2) Turn on the projector.
3) Press the  button to display the [NETWORK/USB] menu, and then select [WIRED LAN], and 
press  button.
4) Set the detailed setup of [WIRED LAN].
For details, see “WIRED LAN” (Æpage 85).
Note
 fPlease confirm with your network administrator before you connect to an existing network. fThe following settings are set before the projector leaves the factory....

[USER1] ~ [USER3]
[SSID]Panasonic Projector
[DHCP]OFF
[IP ADDRESS]1 9 2 .1 6 8 .11.1 0 0
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]1 9 2 .1 6 8 .11.1
[AUTHENTICATION]OPEN
[ENCRYPTION]NONE
[CHANNEL]11
[DNS1]/[DNS2]NONE
Computer operation
1) Make the network setting according to your system administrator.
 fIf you select [M-DIRECT] for [WIRELESS LAN] in the network menu, the IP  address will automatically be acquired.
 fIf you select default settings of [USER1] ~ [USER3] for [WIRELESS LAN] in the network...

Accessing from the Web browser
1) Activate the Web browser in the personal computer.
2)  Enter the IP address set by the projector into the URL input field of the Web browser.
3) Enter your “User name” and “Password”.
 fThe factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is 
panasonic (lower case).
4) Click [OK] to display the Projector status page.
 f[Projector status] page is displayed.
Note
 fIf you use a web browser to control the...

Description of each item 
1
2
3
4
5
6
1 Page tabSwitches pages by clicking this item.
2 [Status]The status of the projector is displayed by clicking this item.
3 [Projector control]The [Projector control] page is displayed by clicking this item.
4 [Detailed set up]The [Detailed set up] page is displayed by clicking this item.
5 [Change password]The [Change password] page is displayed by clicking this item.
6 [Crestron Connected(TM)]The control page of Crestron Connected™ is displayed by clicking this...

Error information page 
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to 
display the error/warning details.
 fThe projector may go into the standby status to protect the projector de\
pending on the contents of the error.
1
1 Self-diagnosis result display
Displays the item check results.
[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.
[WARNING]: Indicates that there is a warning....

[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
2
1
1 [WIRELESS LAN]Displays the configuration details of wireless LAN.2 [WIRED LAN]Displays the configuration details of wired LAN.
[Basic control] page 
Click [Projector control] → [Basic control].
1
2
5
6 3
4
1 [INPUT]Switches the input signal.
2 [VOLUME]Adjusts the volume level.
3 [PICTURE MODE]Switches the picture mode.
4 [AV MUTE]Switches between AV mute on/off.
5 [POWER]Turns on/off the...

[Advanced control] page
Click [Projector control] → [Advanced control].
1
2
1 [POSITION]Adjusts the position of image and the keystone correction.
2 [PICTURE]Adjusts the items of image.
[Network config] page
Click [Detailed set up] → [Network config].
 fClick [Network config] to display the [CAUTION!] screen.
 fThe current settings are displayed by pressing the [Next] button.
 fClick [Change] to display the setting change screen.
Wired LAN
1
2
3
4
5
6
1 [DHCP ON]/[DHCP OFF]To enable the DHCP client...

Wireless LAN (M-DIRECT)
1
2
3
4
5
6
1 [IP ADDRESS]Enter the IP address.
2 [SUBNET MASK]Enter the subnet mask.
3 [SSID]Set the SSID to be used in M-DIRECT.
4 [CHANNEL]Set the channel to be used in M-DIRECT. 
5 [KEY]Set the key to be used in M-DIRECT.Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
6 [Back]/[Next]Click the [Back] button to return to the original screen. The current settings are displayed by pressing the [Next] button.Click the [Submit] button to update the...