Panasonic LCD Projector Pt Vw345NZ Operating Instructions

[DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projecte\
d under a bright light.
1) Press as to select [DAYLIGHT VIEW].
2) Press qw or the  button.
 fThe [DAYLIGHT VIEW] individual adjustment screen is displayed.
3) Press qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO]Enables auto correction of [DAYLIGHT VIEW]. The luminance sensor detects the brightness and 
color of the surroundings, and the vividness of the image is automatical\...

[TV-SYSTEM]
(Only when the / terminal is selected)
The projector will automatically detect the input signal, but you can se\
t the color system manually when an unstable signal is 
input. Set the color system matching the input signal.
1) Press as to select [TV-SYSTEM].
2) Press qw or the  button.
 fThe [TV-SYSTEM] individual adjustment screen is displayed.
3) Press qw to select the color system.
 fThe items will switch each time you press the button.
 fSelect among [AUTO], [NTSC], [NTSC4.43], [PAL],...

[POSITION] menu
On the menu screen, select [POSITION] from the main menu, and select an \
item from the submenu.
Refer to "Navigating through the menu" (Æpage 54) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
[KEYSTONE]
You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.
1) Press as to select [KEYSTONE].
2) Press the  button.
 fThe [KEYSTONE] screen is displayed.
3) Press as to select...

[CORNER CORRECTION]
1) Press as to select [KEYSTONE].
2) Press the  button.
 fThe [KEYSTONE] screen is displayed.
3) Press as to select [CORNER CORRECTION].
4) Press the  button.
 fThe [CORNER CORRECTION] screen is displayed.
5) Press as to select the item to adjust, then press the  button.
 fThe [CORNER CORRECTION] individual adjustment screen is displayed.
6) Press asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT][UPPER RIGHT][LOWER LEFT][LOWER RIGHT]
Note
 fEither [KEYSTONE] or [CORNER CORRECTION]...

Horizontal (right and left) 
adjustment.
Press the w button.The image position moves to the 
right.
Press the q button.The image position moves to the 
left.
[DOT CLOCK]
(Only for still image computer (RGB) signals input)
Use this function to adjust and minimize the effect of interference caused by projection of patterns consisting of vertical stripes.
The projection of the following striped pattern may cause cyclic patterns (noise). Adjust so that the amount of interference is at a minimum. You can...

[ASPECT]
You can switch the aspect ratio of the image.
The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING] first. 
(Æ page 70)
[SCREEN SETTING] is only for PT-VW345NZ.
1) Press as to select [ASPECT].
2) Press qw or the  button.
 fThe [ASPECT] individual adjustment screen is displayed.
3) Press qw to switch the item.
 fThe items will switch each time you press the button.
[NORMAL]Displays images without changing the aspect ratio of the input signals....

[LANGUAGE] menu
On the menu screen, select [LANGUAGE] from the main menu, and select an \
item from the submenu.
Refer to "Navigating through the menu" (Æpage 54) for the operation of the menu screen.
 fPress as to select a language, and press  button to set.
[LANGUAGE]
You can select the language of the on-screen display.
 fVarious menus, settings, adjustment screens, control button names, etc., \
are displayed in the selected language.
 fThe language can be changed to English, German, French,...

[DISPLAY OPTION] menu 
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (Æpage 54) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
[ON-SCREEN DISPLAY]
Set the on-screen display and position.
[INPUT GUIDE]
Set whether to display the input guide when switching the input source.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the  button.
 fThe [ON-SCREEN DISPLAY]...

4) Press qw to switch the item.
 fThe items will switch each time you press the button.
[ON]Displays the warning/error message.
[OFF]Hides the warning/error message.
[HDMI SIGNAL LEVEL]
Switch the setting when the external equipment is connected to the  terminal of the projector and the image is not 
projected correctly.
1) Press as to select [HDMI SIGNAL LEVEL].
2) Press the  button.
 fThe [HDMI SIGNAL LEVEL] screen is displayed.
3) Press qw to switch the item.
 fThe items will switch each time you...

 fThe items will switch each time you press the button.
[CC1]Displays CC1 data.
[CC2]Displays CC2 data.
[CC3]Displays CC3 data.
[CC4]Displays CC4 data.
Note
 fClosed caption is a function that displays text information of video signals mainly used in North America. Captions may not 
be displayed depending on the connected devices or contents being played\
 back.
 f[CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YCBCR signal is input.
 fIf [CLOSED CAPTION SETTING] is set to [ON], the...