Panasonic LCD Projector Pt Vw345NZ Operating Instructions

Using the AV MUTE function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the 
audio and image temporarily.
 button
1) Press the  button on the remote control.
 fThe audio and image turn off.
2) Press the  button again.
 fThe audio and image turn on.
Note
 fWhen [MIC] is set to [ON], the audio of MIC can be output even during AV MUTE.
Using the P IN P function
(Only for PT-VW345NZ)
Two images can be projected...

Using the P-TIMER function
You can operate the P-TIMER function.
Presentations, etc. can be performed while checking the elapsed time or \
time remaining in the preset time.
button
1) Press the  button on the remote control.
 fThe count is started.
 fThe elapsed time or the remaining time is displayed at the bottom right \
of the projected image.
2) Press the  button again.
 fThe count is stopped.
3) Press the  button again.
 fThe count is resumed.
Note
 fPressing the button for at least 3 seconds to...

Chapter 4   Settings
This chapter describes the settings and adjustments you can make using the on-screen menu.
ENGLISH - 53  

Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 
button
1) Press the  button on the remote control or the control panel.
 fThe main menu screen appears.
2) Press as to select an item from the main menu.
 fThe selected item is highlighted in yellow.
3) Press the  button.
 fThe submenu is displayed, and submenu items become selectable.
4) Press as to select the desired sub-menu item, press qw or...

Note
 fPressing the  button or  button while the menu screen is d\
isplayed returns to the previous menu.
 fSome items may not be adjusted or used for certain signal formats to be \
input to the projector. The menu items that cannot 
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME 
LOCK] may not be displayed depending on the input signal.
 fSome items can be adjusted even if signals are not input.
 fIndividual adjustment screen is cleared...

Sub menu
The sub-menu screen of the selected main menu appears, and you can set and adjust the various items in the submenu.
PICTURE [  ]
Sub-menu itemFactory defaultPage
[PICTURE MODE][STANDARD]*158
[CONTRAST][0]58
[BRIGHTNESS][0]59
[COLOR]*2[0]59
[TINT]*2[0]59
[SHARPNESS][8]59
[COLOR TEMPERATURE][DEFAULT]60
[IRIS][OFF]*160
[ADVANCED MENU]-60
[DAYLIGHT VIEW][AUTO]61
[DIGITAL CINEMA REALITY][ON]61
[NOISE REDUCTION]*3[OFF]61
[TV-SYSTEM]*3[AUTO]62
[RGB/YPBPR]/[RGB/YCBCR]*4[AUTO]62
*1 It may be different...

PROJECTOR SETUP [  ]
Sub-menu itemFactory defaultPage
[STATUS]-74
[COMPUTER2 SELECT][COMPUTER2 IN]74
[PROJECTOR ID][ALL]74
[INITIAL START UP][LAST MEMORY]75
[PROJECTION METHOD][FRONT/DESK]75
[HIGH ALTITUDE MODE][OFF]75
[LAMP POWER][NORMAL]76
[ECO MANAGEMENT]-76
[EMULATE][DEFAULT]77
[FUNCTION BUTTON]-78
[AUDIO SETTING]-78
[EASY SETTING]-80
[TEST PATTERN]-80
[FILTER COUNTER]-80
[INITIALIZE ALL]-81
SECURITY [  ]
Sub-menu itemFactory DefaultPage
[PASSWORD][OFF]82
[PASSWORD CHANGE]-82
[TEXT DISPLAY][OFF]83...

[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an i\
tem from the submenu.
Refer to "Navigating through the menu" (Æpage 54) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source \
and the environment in which the projector is used.
1) Press as to select [PICTURE MODE]. 
2) Press qw or the  button.
 fThe [PICTURE MODE] individual adjustment...

[BRIGHTNESS]
You can adjust the dark (black) part of the projected image.
1) Press as to select [BRIGHTNESS].
2) Press qw or the  button.
 fThe [BRIGHTNESS] individual adjustment screen is displayed.
3) Press qw to adjust the level.
OperationAdjustmentAdjustment range
Press the w button.Increases the brightness of the dark (black) parts of the screen.-32 ~ +32Press the q button.Reduces the brightness of the dark (black) parts of the screen.
[COLOR]
(Only for movie-based signal input) 
You can adjust the...

[COLOR TEMPERATURE]
You can switch the color temperature if the white areas of the projected \
image are bluish or reddish.
1) Press as to select [COLOR TEMPERATURE].
2) Press qw or the  button.
 fThe [COLOR TEMPERATURE] individual adjustment screen is displayed.
3) Press qw to switch the item.
 fThe items will switch each time you press the button.
[DEFAULT]Factory default setting.
[HIGH]Selects the suitable natural color.[LOW]
[IRIS]
Aperture correction and signal compensation are performed...