Panasonic Kx Tva50 Programming Manual

2.5 System Parameters
Programming Manual 191
Va l u e  R a n g e
Max. 64 characters
SMTP Authentication Password
Specifies the password for SMTP Authentication.
Default
None
Va l u e  R a n g e
Max. 64 characters
SMTP Over SSL
Determines whether or not to use the SSL connection for encryption when sending e-mails.
This parameter is effective when SMTP Authentication is set to Enable.
Default
Disable
Va l u e  R a n g e
Disable, Enable
POP Over SSL
Determines whether or not to use the SSL connection for...

2.6 Hardware (H/W) Settings
192 Programming Manual
2.6 Hardware (H/W) Settings
2.6.1 Global Parameters
Global parameters define the settings that affect integration with the PBX.
Flash Time
For Inband and No Integration only. Specifies the length of time the hook switch must be pressed 
before the PBX will recognize it as a flash hook signal. The settings made here should match the 
settings of the PBX.
Default
600 ms
Va l u e  R a n g e
100 ms, 300 ms, 600 ms, and 900 ms
CPC Signal 
For Inband and No...

2.6 Hardware (H/W) Settings
Programming Manual 193
Default
None
Va l u e  R a n g e
None, 6.5 ms, 150 ms, 300 ms, 450 ms, 600 ms, and 900 ms
Disconnect Time
Specifies the length of time the line will be unavailable after a call has ended.
Default
2 s
Va l u e  R a n g e
1 s–8 s
Delay After Dialing Before Analysis
Specifies the length of time between the end of call and the start of Call Progress Tone detection 
when an outgoing call is dialed.
Default
0 ms
Va l u e  R a n g e
0 ms–20000 ms, units 100 ms...

2.6 Hardware (H/W) Settings
194 Programming Manual
Off-hook Delay
Specifies the length of time that passes before dialing starts. This setting is only needed when Dial 
Start Mode is set to Delay Mode.
Default
3000 ms
Va l u e  R a n g e
500 ms–20000 ms, units 100 ms
Delay After Dialing Before On-hook
Specifies the length of time that the VPS waits for an answer when making an outside call. If no 
answer is detected, the VPS disconnects the call.
Default
60 s
Va l u e  R a n g e
0 s–250 s
DTMF Cut...

2.6 Hardware (H/W) Settings
Programming Manual 195
Default
Enable
Va l u e  R a n g e
Disable, Enable 

2.7 Reports
196 Programming Manual
2.7 Reports
The System Administrator can generate various system reports in order to monitor VPS operations.
Reports can be displayed on a PC, printed, or exported.
– Mailbox Information Report
– Call Account Report
– Port Usage Report
– HDD (Memory) Usage Report
– Mailbox Usage Report
– Fax Call Report
– Call Handling Statistic Report
– Custom Service Report
– Message Status Report
– Subscriber Setup Report
– Security Information Report
– Hourly Statistic Report
–...

2.7 Reports
Programming Manual 197
2.7.1 Mailbox Information Report
The mailbox information report displays configuration parameters (from owners extension to e-mail 
options) for a specified mailbox or a range of mailboxes. 

2.7 Reports
198 Programming Manual
Mailbox Information ReportJUL-28-2004 11:30 AM
For Mailbox Range: 210 to 215 
Extension: 210 
Incomplete Call Handling for No Answer: First Name:  JOHN  
Leave a message Disable
Transfer to a covering extension Disable
Page the mailbox owner by intercom paging Disable
Notify the mailbox owner via a beeper Enable
Transfer to operator Disable
Return to top menu Disable
Transfer to specified custom service menu Disable Last Name:  WILIAMS 
Incomplete Call Handling for Busy...

2.7 Reports
Programming Manual 199
Programming Manual References
2.1 Mailbox Settings
Auto Forwarding Status
Mailbox Number: 120 
Delay Time:  00:30 
Forward Mode:  Move
: External Message Delivery 
Active: Yes No Answer Delay Time (min): 60 
Use Mode:  Scheduled 
02:00AM-11:00AM 13:00PM-22:00PM  [Mon] 
02:00AM-11:00AM 13:00PM-22:00PM  [Tue] 
02:00AM-11:00AM 13:00PM-22:00PM  [Wed] 
02:00AM-11:00AM 13:00PM-22:00PM  [Thu] 
02:00AM-11:00AM 13:00PM-22:00PM  [Fri] 
02:00AM-11:00AM  [Sat] 
[Sun] 
[ Device 3]...

2.7 Reports
200 Programming Manual
Feature Manual References
2.4.7 System Reports