Panasonic Kx Tva50 Programming Manual

2.5 System Parameters
Programming Manual 181
Default
F60TN
Va l u e  R a n g e
Max. 16 digits consisting of 0–9,  , # and special codes
D: Disconnecting
F: Hook Flash
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
N: Telephone Number Dialing
0–9, , #: Dial Codes
EFA Transfer Reconnect Sequence on Busy
Specifies the sequence the VPS uses to reconnect the line when the party transferred with EFA 
(External Feature Access) is busy. This...

2.5 System Parameters
182 Programming Manual
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause for 1 s (default)
;: Dial Pause for 3 s (default)
N: Telephone Number Dialing
0–9, , #: Dial Codes
Call Transfer to Outside Answer Mode
Specifies the answering method the VPS uses to detect whether the destination party has answered 
the transferred CO call.
Default
Guidance
Va l u e  R a n g e
Analyze: the VPS monitors the status of the trunk (CO line), recognizes that the destination party 
goes...

2.5 System Parameters
Programming Manual 183
EFA Transfer
Effective for DPT Integration only. Specifies whether or not the VPS uses EFA (External Feature 
Access) when transferring incoming CO calls to a trunk (CO line). If set to Enable, the VPS transfers 
incoming CO calls to a trunk (CO line) according to EFA Transfer Sequence specified in Transfer 
to Outside. If set to Disable, the VPS transfers incoming CO calls to a trunk (CO line) according to 
Call Transfer to Outside Sequence specified in...

2.5 System Parameters
184 Programming Manual
Default
1
Va l u e  R a n g e
1–4
Number of Digits in Telephone Number
Specifies the number of digits for Local Area Telephone Numbers. According to this parameter, a call 
number sent from the VPS is determined whether the local call or long distance call.
Default
8
Va l u e  R a n g e
1–20
Caller-ID Modify Table No.1–No.4
A maximum of 4 Caller ID Modify tables can be assigned.
Local Area/International Call Code
Specifies the parameters for each Local...

2.5 System Parameters
Programming Manual 185
Va l u e  R a n g e
0–9
Additional Digits
Specifies the number to be added to the telephone number (sent from the PBX) to make up a 
telephone number for a local area/international call. The number is added to the beginning of the 
received digits.
Default
None
Va l u e  R a n g e
Max. 4 digits consisting of 0–9,  , #
Long Distance Call
Remove Digits (0–9)
Specifies the number of digits to be deleted from the telephone number (sent from the PBX) to make 
up a...

2.5 System Parameters
186 Programming Manual
VM Menu
Number of Ports for VM Menu Service
Specifies the total number of ports that can be used simultaneously to provide VM Menu service for 
subscribers.
Note
 If too many subscribers try to access VM Menu at the same time, it will not operate properly. 
In order to prevent it, lower the number of ports to be able to access VM menu.
Default
12
Va l u e  R a n g e
0–24
Feature Manual References
2.3.36 VM Menu (DPT Integration Only)
E-mail Integration
E-mail...

2.5 System Parameters
Programming Manual 187
Follow the steps below to edit E-mail Integration:
1.Set E-mail Integration to Enable.
2.Enter an e-mail address next to Mail Address.
Note
 We recommend entering an administrators e-mail address here. If there are any errors 
when the VPS tries to send e-mail messages, error messages will be sent to this address.
3.Enter the name that will appear in e-mail messages sent from the VPS next to Full Name. This 
name should indicate that the message came from the...

2.5 System Parameters
188 Programming Manual
E-mail Integration
If set to Enable, subscribers are able to utilize E-mail Integration features.
Default
Disable
Va l u e  R a n g e
Disable, Enable
Feature Manual References
2.2.20 E-mail Integration
Mail Address 
Specifies the mail address of VPS. We recommend entering an administrators e-mail address here. 
If there are any errors when the VPS tries to send e-mail messages, error messages will be sent to 
this address.
Default
None
Va l u e  R a n g e
Max....

2.5 System Parameters
Programming Manual 189
Va l u e  R a n g e
IP Address: X.X.X.X (X=0-255)
Server Name: Max. 127 characters
Feature Manual References
2.2.20 E-mail Integration
Maximum Message Length
Specifies the maximum length of voice messages sent as e-mail attachment.
Note
 If you attach a voice message that is longer than this setting, surplus parts of the message 
may be discarded when sending the e-mail.
Default
5 min
Va l u e  R a n g e
1 min–30 min
Feature Manual References
2.2.20 E-mail...

2.5 System Parameters
190 Programming Manual
POP Before SMTP
If set to Enable, POP Before SMTP authentication is used for outgoing mail server. For 
authentication, username and password are required.
This parameter is effective when POP Server is equal to SMTP Server.
Default
Disable
Va l u e  R a n g e
Disable, Enable
POP Before SMTP Username
Specifies the user name for POP Before SMTP authentication.
Default
None
Va l u e  R a n g e
Max. 64 characters
POP Before SMTP Password
Specifies the password...