Panasonic Kx Tva50 Programming Manual

2.4 Service Settings
Programming Manual 121
[Example: Setting Menu & Transfer]
1.Click Menu & Transfer out of Custom Service Type and drag it to the right of the screen.
The cursor will be changed into  .
2.Drop Menu & Transfer on where it should be in the Custom Service diagram.
When you drop, the setting screen for the Menu & Transfer will open. 

2.4 Service Settings
122 Programming Manual
3.Enter or select a value for each item.
For each parameters, refer to the description in the following section.
4.Click Record A Prompt For This Custom Service....
This feature is only available when setting Menu & Transfer or Password. You can also 
skip this step, and go to Step 6.
5.Select Record from extension or Import from recorded file.
When Record from extension is selected
1.Specify the extension number of the telephone used for recording, then click...

2.4 Service Settings
Programming Manual 123
2.When the specified extension rings, go off-hook.
3.Click   (record),   (stop), or   (play) to record or 
play a voice label through the extension.
4.Click Disconnect.
5.Click OK.
When Import from recorded file is selected
1.Click ….
The Open dialog box appears.
2.Navigate to the folder containing the WAV files you want to open.
(WAV files must meet the following specifications: IMA ADPCM codec, 8.000 kHz, 
4 bit, mono.)
3.Select the desired WAV file.
4.Click...

2.4 Service Settings
124 Programming Manual
Note
 This parameter overrides Incoming Call Service Prompt.
 If Primary is selected, the default language which is selected from all installed languages 
will be used.
 If None is selected, the prompt mode of previous process will be continued, or Primary 
language will be selected.
Default
Primary
Va l u e  R a n g e
None, Primary, Guidance No. (KX-TVA50: No. 1-3, KX-TVA200: No. 1-10)
Programming Manual References
Incoming Call Service Prompt in 2.3.1...

2.4 Service Settings
Programming Manual 125
Va l u e  R a n g e
Extn: enables callers to be transferred directly to their intended party by dialing the extension number.
Mbx: enables callers to leave messages in a mailbox by entering the mailbox number.
PIN: enables callers to be transferred directly to the specified party according to the setting for PIN 
Call Routing Service by dialing PIN. 
No: disables extension transfer and mailbox transfer; only 1-digit entries will function (following the 
Custom...

2.4 Service Settings
126 Programming Manual
which allows the caller to be automatically connected to an operator after the menu message plays 
back (...or stay on the line to be connected to an operator.).
Default
Operator
Va l u e  R a n g e
Trf to Mbx: Allows the caller to leave messages in a specified mailbox.
Trf to Extn: Transfers the caller to a specified extension.
Operator: Connects the caller to an operator.
Tr f  t o  O u t: Transfers the caller to a specified outside telephone number. Enter...

2.4 Service Settings
Programming Manual 127
Repeat Menu: Repeats the Custom Service menu.
Main Menu: Returns the caller to the Custom Service top menu.
Fax Trf: Allows the caller to send fax messages to an extension specified as the fax extension. Fax 
Management must also be configured (see Fax Management in 2.5.4 Parameters).
List All Names: The VPS will announce the names and extensions numbers of all subscribers 
(except those whose Class of Service Directory Listing parameter is set to No).
None: No...

2.4 Service Settings
128 Programming Manual
Allows you to specify an operation that is enabled on all other dates not included in the set periods.
Default
None
Va l u e  R a n g e

Name: Max. 16 characters
Date: MM/DD (MM: Month, DD: Day)
Operation: Trf to Mbx, Trf to Extn, Operator, Trf to Out, Exit, Prev Menu, Cust Serv, VM Serv, Call Trf 
Serv, Subscr Serv, Dial by Name, Repeat Menu, Main Menu, Fax Trf, List All Names, None (see 
Keypad Assignment 0–9, *, #)

Name: Max. 16 characters
Operation: Trf to...

2.4 Service Settings
Programming Manual 129
Allows you to specify an operation that is enabled for all other times not included in the set time 
periods.
Default
None
Va l u e  R a n g e

Name: Max. 16 characters
Time: HH:MM (HH: Hour, MM: Minute)
Operation: Trf to Mbx, Trf to Extn, Operator, Trf to Out, Exit, Prev Menu, Cust Serv, VM Serv, Call Trf 
Serv, Subscr Serv, Dial by Name, Repeat Menu, Main Menu, Fax Trf, List All Names, None (see 
Keypad Assignment 0–9, *, #)

Name: Max. 16 characters...

2.4 Service Settings
130 Programming Manual
b.Assign the desired Date Control-Holiday Custom Service or its higher layered Custom 
Service to the desired Port/Trunk (see 2.3.1 Service Group).
In Service Settings→ Holiday Settings→ the desired Holiday Service→ Port/Trunk 
Affected, exclude the Port/Trunk numbers that are assigned to the Date Control-Holiday 
Custom Service or the number of its higher layered Custom Service.
Default
None
Va l u e  R a n g e
Trf to Mbx, Trf to Extn, Operator, Trf to Out,...