Panasonic Kx Tda50 Tda100 Tda200 Tda600 Operating Manual

To clear Call Log History•If the accumulated data exceeds the maximum number that can be displayed (99999),
"****" is shown on the display. To reinitialize the display, clear the Call Log History.
• For information about other supervisory features, refer to "1.3.42  ICD Group Features—
Supervisory".
1.3.38  ICD Group Features—Incoming Call Queue Monitor
An extension assigned as a supervisor (supervisor extension) can monitor the status of
waiting calls to be answered in the queue for an...

•For information about other supervisory features, refer to "1.3.42  ICD Group Features—
Supervisory".
1.3.39  ICD Group Features—Log-in/Log-out
You can control your status in an incoming call distribution
(ICD) group. When in the Log-out mode, incoming calls to
the group will not ring at your extension. When you return,
calls will again ring at your extension. (Default: Log-in)
Even if your extension is logged-in, you can have a
specified time period (wrap-up time) when you will not
receive...

To enter/leave Not Ready mode
To set/cancel Not Ready mode or to leave Wrap-up mode (To enter Ready mode)
Document Version  2010-11  Operating Manual931.3.39 ICD Group Features—Log-in/Log-outWhile on-hook
PT/PS
Press Log-in/Log-out.
(Log-in/Log-out)
Specified
OR
All
ICD Group
extension no.
Enter ICD Group extension 
number or     .
ICD Group: Incoming Call Distribution Group While on-hook
PT/PS
Press Log-in/Log-out of a Specified Group.
(Log-in/Log-out
of a Specified Group) PT/SLT/PS
On-hook. Off-hook....

•* The status will be as follows:
Ready  ® Not Ready
Not Ready  ® Ready
Wrap-up  ® Not Ready
• The Log-in/Log-out of a specified group button light shows the current status as follows:
Off : Log-in mode
Red on : Log-out mode
• The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready
mode.
The Wrap-up button light shows the current status as follows:
Off : Ready mode
Red on : Not Ready mode
Flashing red : Wrap-up mode
• In Wrap -up mode/Not Ready mode, your extension does not...

To enter incoming call queue monitoring mode
To monitor the Log-in/Log-out status
•While in Log-in/Log-out monitoring mode, the lights of DSS buttons for the ICD group
members indicate their status as follows:
Off : Out of the ICD group.
Green on : Log-in mode (Ready). The extension user is ready to answer calls.
Flashing Green : Log-in mode (Not Ready). The extension user is not ready to answer calls.
Red on : Log-out mode.
To change the Log-in/Log-out mode
Document Version  2010-11  Operating...

•Depending on the current status of the ICD group member, pressing the DSS button changes
the status as follows:
Log-in mode (Not Ready)  ® Log-in mode (Ready)
Log-in mode (Ready)  ® Log-out mode
Log-out mode  ® Log-in mode (Ready)• For information about other supervisory features, refer to "1.3.42  ICD Group Features—
Supervisory".
1.3.41  ICD Group Features—Manual Queue Redirection
When your incoming call distribution (ICD) group is busy and other outside calls arrive, the
arriving calls are...

FeaturesDescriptionIncoming Call QueueMonitorThe supervisor extension can monitor the status of calls waiting in the queue
to be answered.
( ®  1.3.38  ICD Group Features—Incoming Call Queue Monitor)
Log-in/Log-out Monitor
and Remote Control
The supervisor extension can monitor the Log -in/Log-out status of the ICD
group members with the lights of corresponding DSS buttons. The
supervisor extension can change their Log-in/Log-out status by pressing
the corresponding DSS button.
( ®  1.3.40  ICD Group...

The following chart shows the flow of supervisory displays and access operations:•For information about other ICD group features, refer to  "1.3.36  ICD GROUP FEATURES ".
1.3.43  Message Waiting
 For an extension leaving a message waiting indication
When the called extension is busy or does not answer your call, you can
leave a notification so that the called party may call you back.
 For an extension receiving a message waiting indication
As a message receiver, the Message button light or...

 For an extension leaving a message waiting indication
To leave a message waiting indication
To leave/cancel a message waiting indication
 For an extension receiving a message waiting indication
To check the left message and call back
To call back
Document Version  2010-11  Operating Manual991.3.43 Message Waiting PT/SLT/PS
Press MESSAGE
or enter 4.On-hook.
When the called extension is busy or does not answer
OR
4
MESSAGE
C.Tone PT and SLTPT/SLT/PS
Off-hook.Enter 1 to leave 
or 0 to cancel.On-hook.Enter...

To clear message waiting indications left on your extension•The Message button light or Message/Ringer Lamp shows the current status as follows:
Off : No message
Red on : You have a message.
• The display shows the messages starting with the most recent call.
• At a called extension, the MESSAGE button allows you to clear message waiting indications
if you do not want to call the callers back. To clear, press the MESSAGE button and then
press the soft button.
• On your PT, you can establish one or more...