Panasonic Kx Tda50 Tda100 Tda200 Tda600 Operating Manual

1.3.54  Private Network Features—CLIR (Calling Line Identification
Restriction) When making a call through a private network, you can select whether the called party can see your telephone
number or not.
To show/prevent• You can change the mode by pressing a preset CLIR button while on-hook.
The CLIR button light shows the current status as follows:
Off : shows your telephone number.
Red on : prevents your telephone number being displayed.Customizing Your Phone
• 3.1.4  Customizing the Buttons
Create or...

1.3.56  Private Network Features—COLR (Connected Line
Identification Restriction) When receiving a call through a private network, you can select whether the caller can see your telephone
number or not.
To show/prevent• You can change the mode by pressing a preset COLR button while on-hook.
The COLR button light shows the current status as follows:
Off : shows your telephone number.
Red on : prevents your telephone number being displayed.Customizing Your Phone
• 3.1.4  Customizing the Buttons
Create or...

To call with one touch•To start monitoring another PBX extension after customizing an NDSS button,  go
off-hook, press the NDSS button, and go on-hook. The NDSS button light will show the current status as follows:
Off : The extension is idle.
Red on : The extension is busy.Customizing Your Phone
• 3.1.4  Customizing the Buttons
Create or edit a Network Direct Station Selection (NDSS) button.
1.3.58  Quick Dialing
You can make a call simply by pressing the preprogrammed number for quick dialing.
•The...

1.3.59  Redial, Last NumberThis is convenient when calling the same outside party again.•Up to 32 digits can be stored and redialed.
• After pressing REDIAL, if you hear a busy tone again, press REDIAL to retry.
1.3.60  Room Status Control
In a hotel -type environment, an extension assigned as a hotel operator can check guests into
or out of rooms by changing the room status of the corresponding extension. The hotel
operator’s extension must have flexible buttons assigned as Check-in, Check-out, and...

•The hotel operator must be using a 6 -line display PT to use the Room Status Control features.
• While in Room Status Control mode:
a. The hotel operator ’s extension can only check extensions in/out and ready/not ready. All
other operations will be ignored.
b. The light of each DSS button shows the room status of the corresponding extension as
follows:
For the KX-TDA50/KX-TDA100/KX-TDA200
Off : Checked-out and Ready
Flashing Red : Checked-out and Not Ready
Red on : Checked-in
For the KX-TDA600
Off :...

•After check- in, Remote Extension Dial Lock is deactivated, and the guest can make outside
calls from the room extension. (Refer to "2.1.5  Remote Extension Dial Lock".)
• After check-out, wake-up call, Call Log information, and voice messages for the room
extension are cleared automatically. In addition, features set on the room extension are reset
to the default settings. For a list of features that are reset, refer to  "1.3.26  Extension Feature
Clear".
• When the room status of...

To change the cleaning status of a room (KX-TDA50/KX-TDA100/KX-TDA200 only)•For information about other Hospitality features, refer to "1.3.34  HOSPITALITY
FEATURES".Customizing Your Phone
• 3.1.4  Customizing the Buttons
Create or edit a Check-in, Check-out, or Cleaned-up button.
1.3.61  Speed Dialing, Personal
You can store up to 100 numbers at your extension for your personal use.
This feature is also known as Station Speed Dialing.
To store a phone number
Document Version  2010-11  Operating...

To dial•To call using a directory, refer to "1.4.3  Directories".
1.3.62  Speed Dialing, System
You can make calls using speed dialing numbers stored in the PBX.
•To call using a directory, refer to "1.4.3  Directories".
1.3.63  SVM (Simplified Voice Message)
Your PBX can provide you with answering machine service if an SVM card is installed.
Your extension is assigned a message box, into which callers can leave voice messages for you.
After callers reach your message box, they will hear...

•You may hear a busy tone when trying to access your message box if too many other users
are already accessing their message boxes. In that case, wait a few minutes and try again.
• If the used recording space (including greeting messages and voice messages left by callers)
for the SVM  card reaches a certain limit, the display informs you that the recording space is
almost full, and you will hear dial tone 3 when going off-hook.
Dial Tone 3• Operation Reference When Accessing Your Message Box
After...

 Recording a Normal Greeting Message
To record
To play back
• * This step can be omitted.120Operating ManualDocument Version  2010-11  1.3.63 SVM (Simplified Voice Message) PT/SLT/PS
On-hook.
Off-hook.Enter    38.
1
Enter 1.
83C.Tone   
Record
message.
Example: You have reached John. I am sorry I cannot
take your call right now. Please leave a message.
C.Tone   
The greeting
message is
played back.OR
AUTO DIAL
STORE
dial key
Press STORE or any
dial key (0–9,   , #).
1
0Clear
Rerecord
OR
Enter 0 or 1...