Panasonic Kx Tda50 Tda100 Tda200 Tda600 Operating Manual

To set•An extension personal identification number (PIN) is required to use this feature. Refer to
"1.3.27  Extension PIN (Personal Identification Number)".
• Your previous extension will receive the old settings of your new extension.
• Extension settings can be exchanged between SLT and SLT, PT and PT, or SLT and PT.
• If you are using a  KX-NT300 series (except  KX-NT321)/KX-DT343/KX-DT346  telephone with
a Bluetooth wireless headset, and exchange the settings with another KX-NT300 series...

•For information about answering a waiting call, refer to "1.3.12  CALL WAITING
FEATURES".
1.3.76  Wireless XDP Parallel Mode
Your PS can be used in parallel with a PT or SLT.
When in this mode, incoming calls to a wired telephone also ring the paired PS.
To set
To cancel
• Some wired telephones are prohibited from using this feature.
• If you go off-hook while your paralleled telephone is in use,  the call will switch over to
you.
1.4  Display Features
1.4.1  Call Log, Incoming When you receive...

The following information is logged.
*1If the caller’s name is not logged, the caller’s phone number is displayed.
If the caller’s name is logged, the caller’s phone number is not displayed.
The incoming call log information is displayed as follows:
Document Version  2010-11  Operating Manual1431.4.1 Call Log, IncomingKX-T7636/KX-T7633/
KX-T7630/KX-T7433
KX-NT300 series (except
KX-NT321)/KX-DT300 series
(except KX-DT321)/KX-NT136
Telephone
Callers Name
Information
Callers Phone
Number
Date/Time call...

To view the log information with the Call Log button
To view the log information with the Navigator key
To clear the log information
To call
144Operating ManualDocument Version  2010-11  1.4.1 Call Log, IncomingPress Call Log until 
desired party appears.
Display PT
(Call Log)
While on-hook KX-NT300/KX-DT300/KX-T7600
Press Left twice.
While on-hook
Press Up or Down until 
desired party appears. Press TRANSFER.
Display PT
While viewing the log information
TRANSFER
Press Call Log, or Up or Down
until...

•The Call Log button light shows the current status as follows:
Off:  No incoming call, or you have already viewed the call log.
Red on:  You have missed calls to view.
• If your call is answered by another extension, the caller ’s information is recorded in the logs
of both your extension and the answering extension.
• You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information. Refer to "3.1.2  Personal...

To store the caller’s information in personal speed dialing

146Operating ManualDocument Version  2010-11  1.4.2 Call Log, OutgoingPress STORE.
When the desired party is displayed
Display PT
AUTO DIAL
STORE Press
Enter name.
Press
Press
OCT.27   03:13PM   THU
    
 PROG   INFO   RING   MENU
  1234567890
  106
->12341115678
  0001112223333
  301   
              EXIT  CLEAR ENTER
1
23
5 4
[Initial Display]
   Outgoing Call Log
    
              EXIT        ENTER
Press              until desired number...

•You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information. Refer to "3.1.2  Personal
Programming".
• If a call arrives while you are using the call log, the call log display will be replaced with the
caller’s information.
• PS user: Refer to "Operating Instructions" for PS.•To enter characters, refer to "1.3.14  Character Entry".
1.4.3  Directories
You can select and call using the...

 Storing New Names and Numbers
To store a Personal Speed Dialing Directory item

• Telephone number and name on the display are stored using the first spare Personal Speed
Dialing memory available.
• PS user: Refer to "Operating Instructions" for PS.148Operating ManualDocument Version  2010-11  1.4.3 Directories Enter phone number 
(max. 32 digits).Enter name 
(max. 20 characters).
name
Press PROGRAM
or PAUSE. phone no.
While on-hook
ORPAUSE
PROGRAM
Display PT
Press ENTER 
or STORE.
AUTO DIAL...

•To enter characters, refer to "1.3.14  Character Entry".
• For more details, refer to "To store the names and numbers in personal speed dialing" in
"3.1.2  Personal Programming".
1.4.4  System Feature Access
You can access commonly used features with the "Feature Access" menu.
To select a feature from the "Feature Access" menu
FeaturesDescriptionCall Back CancelYou can cancel Automatic Callback Busy.
( ®  1.3.4  Automatic Callback Busy (Camp-on))Call Pickup...

150Operating ManualDocument Version  2010-11  1.4.4 System Feature Access Sure?           
     
       
 NO          YES
->Call Back Cancel
  Call Pickup Directed
  Call Pickup Group
  Doorphone Call
  Door Open    
              EXIT          ENTER
 Call Back Cancelled           
     
 Extension No. >           
     
      
 EXIT          SET
  Call Back Cancel
->Call Pickup Directed
  Call Pickup Group
  Doorphone Call
  Door Open    
              EXIT          ENTER
 12341115678...