Panasonic Kx Tda50 Tda100 Tda200 Tda600 Operating Manual

To edit the names and numbers of personal speed dialing
3.1.3  Programming Feature ClearYou can reset the settings of the following features on your extension to the default settings with one operation.
FeaturesDefault SettingDisplay Switching ModeAutomaticHot LineOffCalling Line Identification Restriction [CLIR]AllowCalling/Connected Line Identification Presentation [CLIP/COLP]Caller ID assigned on your
extensionPreferred Line Assignment—OutgoingIntercomPreferred Line Assignment—IncomingThe longest...

FeaturesDefault SettingLCS Mode Set [After Answering]Stop recordingAutomatic Call WaitingOnManual Call Waiting—Intercom CallsOn (Tone)Call Waiting Tone Type SelectionTone 1Absent MessageOffPersonal Absent MessageClearedCall Forwarding [FWD]/Do Not Disturb [DND]—Intercom Calls/Outside
CallsOffFWD N/A Timer15 secondsCall Pickup DenyAllowHeadset OperationHeadset offExecutive Busy Override DenyAllowPaging DenyAllowKey Pad Tone SetOnBackground Music [BGM]OffData Line SecurityOffConnected Line Identification...

3.1.4  Customizing the ButtonsYou can customize the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons.• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
• The buttons in the table below can only be set on certain flexible buttons, as follows:
– Flexible buttons on PTs/Add-on Key Modules/PSs: all buttons can be set.
– Flexible buttons on...

ButtonProgramming InputGroup FWD—Outside calls  + Incoming call distribution group extension no.Group FWD—Intercom
calls  + Incoming call distribution group extension no.Account Conference Terminate External Feature Access
(EFA) Call Park  + Parking zone no. (2 digits)Call Park (Automatic Park
Zone)  Call Log *4 Call Log for ICD Group *4  + Incoming call distribution group extension no.Log-in/Log-out Log-in/Log-out of a
specified group  + Incoming call distribution group extension noLog-in/Log-out for...

ButtonProgramming InputNetwork Direct Station
Selection (NDSS) *6  + Another PBX extension no.CTI Primary Directory Number
(PDN) *7 Secondary Directory
Number (SDN) *7  + Extension no. +  + delayed ringing time (0–7) *8Check-in*4 Check-out *4 Cleaned-up *4*9 Two-way Record *10  + Voice mail floating extension no. *11Two-way Transfer*10  + Voice mail floating extension no. *11One-touch Two-way
Transfer *10  + Voice mail floating extension no. *11
 +  + Extension
no./Incoming call distribution group...

•*1
 "", "#", FLASH/RECALL, PAUSE, Secret (INTERCOM) and TRANSFER can also be
stored.
If you do not want to display the stored number when making a call, press the Secret
(INTERCOM) button before and after the numbers you wish to conceal.
If you store an outside party’s number, you should first store a line access number.
If you need to enter an account code, you can enter the specified account code before the
line access number.

• *2
 For a PF button, "2" is not required to...

Document Version  2010-11  Operating Manual1773.1.4 Customizing the ButtonsPress(CO)
Enter the programming input (          ),
and desired phone number.2
Press          in front of the number you
want to keep secret.
INTERCOM
Press          again after entering the number
you want to keep secret.
INTERCOM
Press               to store.
Press          or           or
PROGRAMPAUSEPROG
OCT.27   03:13PM   THU
    
 PROG   INFO   RING   MENU
     Program No?->              EXIT   CONT   NEXT
    Single...

To distinguish the ringing tones for each CO, ICD Group, PDN, SDN, or INTERCOM button
(Digital proprietary telephone only)• * Available tone types vary depending on the telephone you are using:
– KX-NT300 series (except KX-NT321)/KX-NT136/KX-DT300 series (except KX-DT321)/
KX-T7600 series: Tone types "01" to "30" (01–20: tone, 21–30: melody) are available.
– KX-NT265/KX-NT321/KX-DT321: Only tone types "01" to "08" are available.
It is possible to enter a tone type number...

3.2  Manager Programming
3.2.1  Programming Information The manager can program the following item.
• Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display (over 2 lines)
(e.g., KX-NT343, KX-DT346, KX-T7636)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234)
CAUTION
•The PBX has a default password preset. For security, change the password the first time...

ItemProgramming InputLocking/unlocking other extensions.
(Remote Extension Dial Lock)  +  + Extension no. +  (to lock)/
 (to unlock) + 
Clearing the PIN and PIN lock for
extensions.  +  + Extension no. + Clearing the PIN and PIN lock for
verification codes.  +  + Verification code + Setting the verification code PIN.  +  + Verification code + PIN (max. 10 digits)
+ CAUTION There is a risk that fraudulent telephone calls will be made if a third party discovers your
password (verification code PIN).
The...