Panasonic Kx Tda50 Tda100 Tda200 Tda600 Operating Manual
Here you can view all the pages of manual Panasonic Kx Tda50 Tda100 Tda200 Tda600 Operating Manual. The Panasonic manuals for IP Phone are available online for free. You can easily download all the documents as PDF.
Page 41
•If you receive a call waiting tone , you can ask a third party to pick up your second call with Directed Call Pickup. Call Pickup Deny You can deny or allow other people to pick up your calls. 1.3.10 Call Splitting When talking to one party while the other party is on hold, you can swap the calls back and forth (alternately). To alternate between the parties leaving one party on hold temporarily Document Version 2010-11 Operating Manual411.3.10 Call Splitting Off-hook.On-hook.Enter 1 to deny or 0...
Page 42
To leave the conversation and then let the two parties talk 1.3.11 Call Transfer– Transferring to an Extension in the PBX – Transferring to an Outside Party Using the PBX Service • You can transfer a held call without talking, and go on -hook even if the transferred party does not answer the call. If a transferred call is not answered within a specified time, it will ring at a preprogrammed extension, if set, or at your extension again. If you are off -hook at that time, you will hear an alarm tone....
Page 43
Transferring to an Extension in the PBX To transfer• When you are not at your desk or not in the office and receive a forwarded outside call, for example on your cellular phone, it is possible to transfer the call to an extension in the PBX by pressing # + desired extension number (if enabled through system programming).• For the transfer operation using an SDN button, refer to "1.3.50 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension (KX-TDA100/KX-TDA200/ KX-TDA600...
Page 44
To transfer with one touch (One-touch Transfer)•System programming is required to use the One-touch Transfer feature during a conversation with an extension. Transferring to an Outside Party Using the PBX Service Some extensions may be restricted from performing this feature. 44Operating ManualDocument Version 2010-11 1.3.11 Call TransferDuring a conversation with an outside party PT/PS Press DSS. (DSS) On-hook.Talk. This step can be omitted. On-hook. Talk. Seize CO line. During a conversation...
Page 45
•Time limit Both the caller and the transferred party will hear an alarm tone fifteen seconds before a specified time period, and the call will be disconnected. • To return to the held call before the destination answers , press the TRANSFER button, corresponding CO, ICD Group, or INTERCOM button, or the hookswitch.Customizing Your Phone • 3.1.4 Customizing the Buttons Create or edit a Direct Station Selection (DSS) button. 1.3.12 CALL WAITING FEATURES • Call Waiting (BSS [Busy Station Signaling]) •...
Page 46
•Off-hook Call Announcement (OHCA): The caller’s voice is heard through the built-in speaker ( ® 1.3.46 OHCA (Off-hook Call Announcement)). • Whisper OHCA: The caller’s voice is heard through the handset ( ® 1.3.75 Whisper OHCA). Answering Call Waiting in the PBX During a conversation, a call waiting tone or voice announcement through the speaker or the handset occurs when an outside call has been received or another extension is letting you know a call is waiting. You must activate this feature to...
Page 47
After talking to the new party (second call), you can disconnect (2.1) or hold (2.2) it and then retrieve the first call. 2.1 To disconnect the second call and then talk to the original party Document Version 2010-11 Operating Manual471.3.12 CALL WAITING FEATURESSLT While hearing a tone Enter 50. 05 Talk to the new party.Press Recall/hookswitch. C.Tone PT/PS During a conversation Off-hook.On-hook.Talk to the original party. OR(CO) INTERCOM OR (ICD Group) (SDN) (PDN) OR OR Press CO, ICD Group,...
Page 48
2.2 To hold the second call and then talk to the original party After holding it, you can talk to the original party. Then, you can disconnect it and then talk to the new party again.48Operating ManualDocument Version 2010-11 1.3.12 CALL WAITING FEATURESPT/PS Press HOLD. During a conversation Disregard this step if both parties are extensions. HOLD Talk to the original party. Off-hook.On-hook.Talk to the new party. OR(CO) INTERCOM OR (ICD Group) (SDN) (PDN) OR OR Press CO, ICD Group, PDN, SDN, or...
Page 49
•Depending on the type of your telephone , you may be able to talk to the other party using the speaker and the microphone (Off-hook Call Announcement [OHCA]), or you can receive an announcement through the handset (Whisper OHCA), if you are having a conversation using the handset. For more details on each feature, refer to "1.3.13 Call Waiting Tone", "1.3.46 OHCA (Off-hook Call Announcement)", or "1.3.75 Whisper OHCA". • The caller’s name or number is displayed for five...
Page 50
Customizing Your Phone • 3.1.4 Customizing the Buttons Create or edit an External Feature Access (EFA) button. 1.3.13 Call Waiting Tone During a conversation, you can be informed of a waiting call with a call waiting tone through the built -in speaker of your PT or the handset of your SLT. To set/cancel for intercom calls (Manual Call Waiting) To set/cancel for outside calls (Automatic Call Waiting) • To change the tone from a PT, refer to "3.1.2 Personal Programming".•For information about...