Panasonic Kx Tda50 Tda100 Tda200 Tda600 Operating Manual

 When You Use a Panasonic Proprietary Telephone
If you use a Panasonic proprietary telephone and the Console, they may have some of the useful feature
buttons described below. For a PS user, refer to "Operating Instructions" for PS. These buttons make
operations simple. The illustrations may differ from the buttons on your telephone.
Buttons on the PTFlexible Buttons:
Used to make or receive an
outside call (CO button), or as a
feature button.
Button assignment is required.
Refer to...

TRANSFER:
Used to transfer a call to
another party.HOLD:
Used to place a call on hold.FLASH/RECALL:
Used to disconnect the current
call and make another call
without hanging up.
This button can also be used as
a CANCEL button while
on-hook.CONF (Conference):
Used to establish a multiple party
conversation.VOICE CALL/MUTE:
Used to monitor an intercom call
automatically, but it cannot be
used for hands-free
conversations. It also mutes the
handset microphone during a
conversation.Call Forwarding (FWD)/Do...

Programmable Feature
(PF):
Located on the upper part of the
Flexible button array or on the
DSS Console.
Assigns the desired button and
used to access the stored
feature. Mostly used as a
One- touch Dialing button. (Only
the "F and number" may be
shown on some telephones.)MODE:
Used to shift the display to access
various features.SELECT:
Used to select the displayed
item or to call the displayed
phone number.SHIFT:
Used to access the second level of Soft
button features.ENTER:
Used to confirm the...

ButtonFeatureGroup FWD—Both callsUsed to forward all the calls to your group to a specified destination.Group FWD—Outside callsUsed to forward the CO line calls to your group to a specified destination.Group FWD—Intercom callsUsed to forward the intercom calls to your group to a specified destination.AccountUsed to enter an account code.ConferenceUsed to establish a multiple party conversation.TerminateUsed to disconnect the current call and make another call without hanging
up.External Feature Access...

ButtonFeatureTwo-way TransferUsed to record a conversation into the mailbox of a specific extension.One-touch Two-way TransferUsed to record a conversation into the mailbox of a specific extension with
one touch.Live Call Screening (LCS)Used to monitor your own voice mailbox while an incoming caller is leaving
a message and, if desired, intercept the call.Voice Mail TransferUsed to transfer a call to the mailbox of a specified extension.Network Direct Station
Selection (NDSS)Used to access an extension...

 How to Follow the Steps
An example of system operation is shown below.26Operating ManualDocument Version  2010-11  1.1.1 Before Operating the Telephones The DSS button light shows the current status as follows:
Off:The extension is idle.
Red on:Your or another extension is using the line.
Customizing Your Phone
3.1.3 Customizing the Buttons
Create or edit a Direct Station Selection (DSS) button.
PT and SLTPT/SLT/PS
Off-hook.Talk.Dial extension number 
or press DSS.
ORextension no.
(DSS)
Feature title...

 Connection Example
This diagram shows you a connection example.
*1 ITSP: Internet Telephony Service Provider
*2 DCE: Data Circuit Terminating Equipment
Document Version  2010-11  Operating Manual271.1.1 Before Operating the Telephones External Sensor/
External Relay DeviceFax Machine
Wireless Phone
KX-T7600 KX-T7600 Doorphone & Door Opener
External Music Source
Pager/
SpeakerBatteries
Voice Processing
System PC
PrinterTelephone Company
Hybrid IP-PBX
PC
CS PSKX-T7636/
KX-T7633PC USB
AmplifierPC SLT
APT...

1.2  Basic Operations
1.2.1  Making Calls –
 Intercom Call
–
 Operator Call
–
 Calling an Outside Party
 Intercom Call
You can call another extension user.
• The DSS button light shows the current status as follows:
Off:  The extension is idle.
Red on:  Your or another extension is using the line.
• * You have to press the SDN button once or twice depending on the mode of the SDN button.
For details, refer to "1.3.50  PDN (Primary Directory Number)/SDN (Secondary Directory
Number) Extension...

 Operator Call
You can call an extension or a group assigned as the operator.
 Calling an Outside Party
You have to seize a CO line before dialing an outside phone number because external calls are made via your
PBX.
Select one of the following methods:
Automatic Line Access
CO Line Group Access
Document Version  2010-11  Operating Manual291.2.1 Making Calls PT/SLT/PS
Off-hook.
Enter 0.
0  PT/SLT/PS
Off-hook.Talk.Dial outside 
phone number. Press L-CO or 
enter automatic 
line access number.
OR
9...

S-CO Line Access•Each of the S-CO button or G-CO button light shows the current status as follows:
Off:  The line is idle.
Red on:  The line is in use.
• You may be restricted from making a call to the specified outside party. To make a call, refer
to "1.3.67  Verification Code Entry" or "1.3.73  Walking COS".• To confirm number before dialing,  you can enter a phone number and confirm it on the
display and then go off-hook. (Predialing)
• To make a call to another party without going on...