Panasonic Kx-Td816e, Kx-td1232e User Manual

4-52DPT Features
C4.2DPT Features
CO Incoming Call Information Log
Allows you to confirm the CO incoming call information on the display.  You can also
call back the caller by selecting one of the memorised numbers.
Display Operation (— for KX-T7235 / KX-T7436)
1.Press the OLD(S1) or NEW(S2) button to see the CO
incoming call information.
–OLD :Information that you have already confirmed by
pressing NEW (S2) button.
–NEW:Information that you have not confirmed yet.
2.Confirmthe information by pressing...

DPT Features4-53
4.2DPT FeaturesC
2.Confirmthe information by pressing the NEXT(S3) PREV
(S3) button.
•Pressing the SHIFT button provides you with the PREV
(S3) button on the display.
•Pressing the INFO(S1) button provides you with the
further information for one party.  The upper line of the
display changes as follows:
(sequence number and a name)
(sequence number,date,time,
and number of times called)
(CO line number and CO line
name)
•To exit from this mode,press the SHIFT button and then
EXIT (S1)...

Programming References
•User Programming (Manager Programming) (Section 3)
[001]System Speed Dialling Number Set
[002]System Speed Dialling Name Set
•System Programming — Installation Manual
[622]Incoming Call Display
Feature References
CO Incoming Call Information Log Lock
CO Incoming Call Information Log Mode
4-54DPT Features
C4.2DPT Features 

DPT Features4-55
4.2DPT FeaturesC
CO Incoming Call Information Log Lock
Allows you to lock the display of your extension so that incoming outside call
information is not shown on the display,if you do not want others to see the information.
Locking
1.Lift the handsetor press the SP-PHONEbutton.
2.Dial the feature number(57).
3.Dial the lock code(000 through 999).
4.Dial the same lock codeagain.
•You hear a confirmation tone and then a dial tone.
•The display shows:
Lock code
5.Hang upor press the...

4-56DPT Features
C4.2DPT Features
Conditions
•The operator can unlock the display of call log for any extension if you forget the
lock code that you used to lock the extension. (CO Incoming Call Information Log
Lock Clear)
•While in locking status,you cannot lock the display of your extension with new lock
code. You must unlock your extension before locking with new lock code.
•You cannot enter “”“#”as a part of a lock code.
•When you unlock the extension using the lock code which is different from...

DPT Features4-57
4.2DPT FeaturesC
CO Incoming Call Information Log Mode
Allows you to control the CO Incoming Call Information Log Mode on your extension
when the information area is full.  If you set this mode,new CO incoming call
information is retained but old data is discarded.  If you cancel this mode,new CO
incoming call information is not memorised on your extension.
Setting / Cancelling
1.Lift the handsetor press the SP-PHONEbutton.
2.Dial the feature number(56).
3.Dial 1 or0.
- 1 :for setting...

4-58DPT Features
C4.2DPT Features
Conference
During a two-party conversation,you can add a third party to make a three-party
conference.  The members of a conference on the line may be three extensions,one
extension and two CO lines,or two extensions and one CO line.
To establish a conference
While having a two-party conversation;
1.Press the CONFbutton.
•The current party is placed on hold.
•The CONF indicator light flashes red slowly.
2.Dial the phone numberof the third party.
•You must dial the line...

DPT Features4-59
4.2DPT FeaturesC
To talk to the original party while holding the third party
1.Press the TRANSFERbutton.
•You hear a confirmation tone (optional).
•If both of the other parties are extensions,the INTERCOM
indicator light flashes green at a moderate rate.
To put both parties on hold
1.Press the HOLDbutton.
•This feature is available only when at least one party is on a
CO line.
Conditions
•Up to six conference calls are allowed simultaneously.
•You can return to the original party before...

4-60DPT Features
C4.2DPT Features
Connected Line Identification Restriction (COLR)
Allows you to restrict the presentation of your number to the calling party when you
receive the incoming call.  You can set the calling party not to see your number on the
display.  This feature is an ISDN service.
To restrict / allow the presentation of your number to the calling party
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Dial the feature number(58).
3.Dial 1or 0.
- 1 :to restrict (On)
- 0 :to allow...

DPT Features4-61
4.2DPT FeaturesD
Display Call Information
When you have a call with an outside party,you can see the phone number or the
duration of a telephone call,the meter,the phone charge on the display by pressing the
CO button repeatedly.
When you make a call with an outside party;
•The display shows the telephone number that you are
calling.
When you receive a call from an outside party;
•The display shows the duration of a telephone call.
After receiving a signal of the telephone charge;
•The...