Panasonic Kx-Td816e, Kx-td1232e User Manual

4-82DPT Features
L4.2DPT Features
In the Private mode;
When callers are connected to your voice mailbox,an alert tone is sent.  The Live Call
Screening indicator light flashes green rapidly when a caller is connected to your voice
mailbox. (When using a single line telephone,which is connected with a proprietary
telephone in parallel,you hear ringing.)
Stopping the alert tone
1.Press the RECALLor FLASH/RCLbutton or the Live Call
Screening Cancelbutton.
•The Live Call Screening indicator light turns...

DPT Features4-83
4.2DPT FeaturesL
While having a conversation with another party;
When the extension user is having a conversation,a call waiting tone is sent.  The Live
Call Screening indicator light flashes green rapidly.
- If you want to terminate the current call
Monitoring
1.Hang upor press the SP-PHONE/MONITORbutton.
•An alert tone is sent.
2.Lift the handsetor press the SP-PHONE/MONITORbutton.
•Monitoring starts.
Having a conversation with the party
1.Press the flashing Live Call Screeningbutton....

4-84DPT Features
L4.2DPT Features
Conditions
•A flexible CO and DSS button can be assigned as a Live Call Screening (LCS)
button.
•The Live Call Screening indicator shows the feature status as below;
Red Steady on..................Live Call Screening mode is on.
Off ...................................Live Call Screening mode is off.
Slow flashing green..........Live Call Screening is acting.**
Rapid flashing green........Alert tone is ringing in the Private mode.**
** 
The DSS button indicator lights...

DPT Features4-85
4.2 DPT FeaturesL
Log-In / Log-Out
Allows you to assign the log-in mode or log-out mode within the hunting or UCD group.
When in the log-out mode, you can leave the group temporarily, preventing the hunting
calls from being sent to your extension.
Log-In / Log-Out (Using the Log-In / Log-Out button)
1. Lift the handsetor press the SP-PHONE/MONITOR button.
2. Press the flexible buttonwhich is assigned as the Log-
In/Log-Outbutton.
– Log-In mode: The indicator light is off.
– Log-Out mode:...

4-86DPT Features
L4.2DPT Features
Conditions
•The Log-In / Log-Out button should be assigned to a flexible CO button.
•Default is “Log-In”mode.
•There should be at least one extension that is in log-in mode.  Only one log-in
extension cannot be set in log-out mode.
Programming References
•Station Programming (Section 2)
Flexible Button Assignment — Log-In / Log-Out Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
Feature References
Uniform Call Distribution...

DPT Features4-87
4.2DPT FeaturesM
Message Waiting
Allows you to leave a message for another extension.  The message waiting lamp
(MESSAGE indicator) gives a visual indication that a message has been received.
Setting
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Dial the feature number(70) and 1.
3.Dial the extension numberwhere calls will be left.
•You hear a confirmation tone and then a dial tone.
4.Hang upor press the SP-PHONE/MONITORbutton.
If the called extension is busy or does not...

4-88DPT Features
M4.2DPT Features
Checking and Selecting a message by the receiver
If there is any message,the message waiting lamp (MESSAGE
indicator) light is on.
When the telephone is idle and on-hook;
1.Press the MESSAGEbutton repeatedly until the desired
message appears.
•The stored messages are shown on the display in the order
they were received.

When Tony at extension 123 left a message,the display
shows:
Calling back the message sender
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
•You...

DPT Features4-89
4.2DPT FeaturesM
Conditions
•The system supports a maximum of 128 simultaneous messages.  In trying to send the
129th message,you hear a reorder tone.
•A flexible button on the KX-T7250 (no MESSAGE button provided) can be assigned
as the MESSAGE button.
•If the MESSAGE button is neither provided nor assigned,dial tone 4* after going off-
hook informs you of a message waiting.
•If multiple messages are left at your extension,calling back is executed in the
received order.
•If you select a...

4-90DPT Features
M4.2DPT Features
Microphone Mute 
Allows you to turn off the microphone so that you can consult privately with others in the
room.
Setting
While having a conversation in handsfree mode;
1.Press the AUTO ANSWER/MUTEbutton.
•The AUTO ANSWER/MUTE indicator light flashes red
slowly.
Cancelling
When microphone mute is established;
1.Press the AUTO ANSWER/MUTEbutton.
•The AUTO ANSWER/MUTE indicator light turns off.
Conditions
•This feature is effective for the microphone only; your voice will...

DPT Features4-91
4.2DPT FeaturesN
Night Service
This system supports both the Night and Day modes of operation.  The system operation
for originating and receiving calls can be different in night and day modes.  Toll
restriction calls can be programmed to prevent unauthorised toll calls at night.  Day/Night
mode can be switched manually at anytime desired. 
Switching mode using the feature number
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Dial the feature number(78).
3.Dial 0or 1.
- 0 :from...