Panasonic Kx-Td816e, Kx-td1232e User Manual

4-92DPT Features
N4.2DPT Features
Confirming the current mode (with a display PT only)
When the telephone is idle;
1.Press #.
•The display shows the current mode for 3 seconds.
or
1.Press the flexible buttonwhich is assigned as the Night
button.
•The display shows the current mode for 3 seconds.
Conditions
•The following items have separate day and night programming:
1)Outgoing Permitted CO Line Assignment
2)Direct In Lines (DIL)
3)Doorphone Ringing Assignment
4)Intercept Routing
5)Ringing,Delayed
6)Toll...

DPT Features4-93
4.2DPT FeaturesN
Feature References
CO Line Connection Assignment — Outgoing (®see Installation Manual)
Direct In Lines (DIL) (®see Installation Manual)
Doorphone Call
Intercept Routing (®see Installation Manual)
Ringing,Delayed (®see Installation Manual)
System Feature Access Menu (4.4/Special Display Features)
Toll Restriction (®see Installation Manual) 

4-94DPT Features
N4.2DPT Features
Notebook Function
Allows you to store an outside phone number in memory during a conversation with an
outside party or on-hook status.  The stored number is dialled automatically with simple
operation.
Storing
While having a conversation or in on-hook status;
1.Press the AUTO DIAL/STOREbutton.  
•The AUTO DIAL/STORE indicator light turns red.
2.Press the AUTO DIAL/STOREbutton again.
•The AUTO DIAL/STORE indicator light flashes red.
3.Dial the desired phone number....

DPT Features4-95
4.2DPT FeaturesO
Off-Hook Call Announcement (OHCA)
Allows you to signal a busy extension that your call is waiting.  Your voice is received
through the built-in speaker of the called party’s telephone (KX-T7235 and KX-T7436
only).  The called party can connect to the two parties and carry two independent
conversations.
Setting / Cancelling to receive OHCA
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Enter the feature number(731).
3.Dial 2or 0.
- 2 :to set
- 0 :to cancel
•You...

4-96DPT Features
O4.2DPT Features
To talk to the third party
If you hear two beeps and a voice announcement;
1.Consult with the third party by microphone.
•The called extension display shows the  calling extension’s
number or name for 5 seconds in 10 second intervals.
•You can talk to two parties independently.
To talk to the third party by terminating the current call
If you hear two beeps and a voice announcement;
1.Hang up.
•The current call is disconnected.
•The INTERCOM indicator light turns green....

DPT Features4-97
4.2DPT FeaturesO
Off-Hook Monitor 
Allows you to let other users listen to the conversation through the built-in speaker,
while continuing the conversation using the handset.
This feature is only available for the KX-T7431,KX-T7433 and KX-T7436 telephone
users.
Setting
During a conversation using a handset
1.Press the SP-PHONEbutton.
•The SP-PHONE indicator light turns on and the other
party’s voice is heard through the built-in speaker.
Cancelling
When the off-hook monitor mode is...

4-98DPT Features
O4.2DPT Features
One-Touch Dialling
Allows you to call a number or access a system feature with the touch of a button.  This
is done by storing an extension number,a telephone number or a feature number of up to
sixteen digits on an One-Touch Dialling button.
Dialling
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Press the flexible buttonwhich is assigned as the One-Touch
Diallingbutton.
Conditions
•To store numbers,refer to the Station Programming.
•The destination numbers...

DPT Features4-99
4.2DPT FeaturesO
Operator Call
Allows you to call an operator within the system.  There can be up to two extensions
assigned as Operator 1 and 2.  If there is only one operator or if you do not specify the
operator,you should generate the General call.  If you want to specify the operator,you
should generate the Specific call by pressing a pre-assigned operator call number.
General call
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Dial the feature number(0).
Specific call...

4-100DPT Features
O4.2DPT Features
Outward Dialling,Line Access — SUMMARY
A CO line can be accessed in the following ways:
Conditions
•The CO button assignment on your telephone can be re-arranged as required.  Refer
to “Flexible Button Assignment”in Station Programming (Section 2).
•The CO button (L-CO,G-CO or S-CO) must be programmed prior to use.
•After dialling the feature number or pressing the CO button,you will hear one of the
following tones:
Dial tone:Indicates that an idle CO line is captured....

DPT Features4-101
4.2DPT FeaturesO
Programming References
•Station Programming (Section 2)
Flexible Button Assignment —Loop-CO (L-CO) Button,Group CO (G-CO)
Button,Single-CO (S-CO) Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
•System Programming — Installation Manual
[103]Automatic Access CO Line Group Assignment
— (Used for “Line Access,Automatic”only.)
[400]CO Line Connection Assignment
[605]–[606]Outgoing Permitted CO Line Group Assignment — Day/Night...