Home > Panasonic > Communications System > Panasonic Kx-Td816e, Kx-td1232e User Manual

Panasonic Kx-Td816e, Kx-td1232e User Manual

Here you can view all the pages of manual Panasonic Kx-Td816e, Kx-td1232e User Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 231

4-122DPT Features
Q4.2DPT Features
Quick Dialling
Allows you to make a quick dialling by pressing a pre-assigned quick dial number.
Dialling
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Dial the quick dial number.
Conditions
•Up to eighty quick dial numbers can be stored by System Programming.
•You must assign a feature number first in program [104] “Quick Dial Assignment,”
and then a quick dial number in program [009] “Quick Dial Number Set”in order for
Quick Dial to be effective.
•For...

Page 232

DPT Features4-123
4.2DPT FeaturesR
Recall 
Allows you to disconnect from the current call and make another call without hanging up.
While hearing any  tone,dialling,or talking;
1.Press the RECALLor FLASH/RCLbutton.
•You hear a dial tone.
2.Dial the phone number.
Conditions
•Disconnection signal must be selected by System Programming in order to execute
this feature during an outside call.
Programming References
•System Programming — Installation Manual
[414]Disconnect Time
[990]System Additional...

Page 233

4-124DPT Features
R4.2DPT Features
Redial,Automatic 
To redial the last dialled number,saved number,“CO Outgoing Call Log”number,“CO
Incoming Call Information Log”number or “Notebook Function”number automatically,
go off-hook with the SP-PHONE button or press the corresponding button directly.
Redial will be automatically repeated a programmed number of times until the called
party answers.
Refer to each feature for dialling operation.
Conditions
•The default setting for redialling is four redials...

Page 234

DPT Features4-125
4.2DPT FeaturesR
Redial,Last Number
Automatically saves the last outside call number you dialled and allows you to make the
same outgoing call again.
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Press the REDIALbutton.
Conditions
•Up to twenty-four digits can be stored and redialled; this does not include the CO line
access code.
•“,”“#,”“PAUSE,”and “INTERCOM”(for secret dialling) are counted as one digit.
•If you hear a busy tone when attempting to redial,select another...

Page 235

4-126DPT Features
R4.2DPT Features
Redial,Saved Number
Allows you to store a telephone number,while connected to a CO line,and automatically
redial the number later.  The saved number can be redialled many times until another one
is stored.
Storing
While having a conversation or hearing a busy tone;
1.Press the AUTO DIAL/STOREbutton.
2.Press the flexible buttonwhich is assigned as the SAVE
button.
Dialling
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Press the flexible buttonwhich is assigned...

Page 236

DPT Features4-127
4.2DPT FeaturesS
Secret Dialling
Allows you to conceal all or part(s) of a “System Speed Dialling”or “One-Touch
Dialling”number assigned to a flexible button on your proprietary telephone (PT) and
DSS Console which normally appears on the display.  Additionally,KX-T7235,KX-
T7431,KX-T7433 and KX-T7436 Model Telephones are capable of Secret Dialling for
“Station Speed Dialling”numbers.
When storing the phone number;
1.Press the INTERCOMbutton beforeand afterthe part you
wish to conceal....

Page 237

4-128DPT Features
S4.2DPT Features
Station Feature Clear
Allows you to reset the following station features to the default settings.
a)Absent Message Capability
b)Automatic Callback Busy (Camp-On)
c)Background Music (BGM)
d)Call Forwarding
e)Call Pickup Deny
f)Call Waiting
g)Calling Line Identification Restriction (CLIR)
h)CO Incoming Call Information Log
i)Connected Line Identification Restriction (COLR)
j)Do Not Disturb (DND)
k)Log-In
l)Message Waiting – (All messages will be removed)
m)Paging — DENY...

Page 238

DPT Features4-129
4.2DPT FeaturesS
Station Speed Dialling
Allows you to store up to ten speed dial numbers at your extension.  These numbers are
available to your extension only.
Storing the phone number
1.Lift the handset or press the SP-PHONE/MONITORbutton.
2.Dial the feature number(60).
3.Dial the Station Speed Dial number(0 through 9).
4.Dial the desired numberand #.
•You hear a confirmation tone.
5.Hang up or press the SP-PHONE/MONITORbutton.
Dialling
1.Lift the handsetor press the...

Page 239

4-130DPT Features
S4.2DPT Features
Conditions
•You can store an extension number,a telephone number,or a feature number of up to
sixteen digits.
•To store the telephone number of an outside party,the line access code (9 or 81
through 88) must be stored as the leading digit.
•Valid digits are “0 through 9,”“”and PAUSE button.
•“Station Speed Dialling”can be followed by manual dialling to supplement the
dialled digits.
•With the KX-T7235,KX-T7431,KX-T7433 and KX-T7436,you can store not only
phone numbers...

Page 240

DPT Features4-131
4.2DPT FeaturesS
System Speed Dialling 
Allows you to make a call using speed dial numbers previously programmed.  This system
supports five hundredspeed dial numbers which are available to all extension users.
1.Lift the handset or press the SP-PHONE/MONITORbutton.
•The INTERCOM indicator light turns green.
2.Press the AUTO DIAL/STOREbutton.
•The AUTO DIAL/STORE indicator light turns on.
•You hear no tone.
3.Dial the System Speed Dial number (000 through 499).
•The AUTO DIAL/STORE...
Start reading Panasonic Kx-Td816e, Kx-td1232e User Manual

Related Manuals for Panasonic Kx-Td816e, Kx-td1232e User Manual

All Panasonic manuals