Panasonic Kx-Td816e, Kx-td1232e User Manual

4-42DPT Features
C4.2DPT Features
Call Splitting
Allows you to have two callers on a line and alternate between them.  If a call comes in
while you are already on the line,you can place the current call on hold and have a
conversation with the other party.
Having a conversation while having another call on hold temporarily (Consultation Hold*)
1.Press the TRANSFERbutton.
•The first held call is released.
•Pressing this button alternates between the callers.
Having a conversation while having another...

DPT Features4-43
4.2DPT FeaturesC
Call Transfer — to CO Line
Allows you to transfer an intercom call to a CO line by a Screened Call Transfer.
Screened Call Transfer
While having a conversation;
1.Press the TRANSFERbutton.
•The other party is placed on hold.
•You hear a confirmation tone and then a dial tone.
2.Press a CObutton or dial the line access code(9 or 81
through 88).
3.Dial the phone numberwhere calls will be transferred.
4.Waitfor an answer and announce.
5.Hang upor press the SP-PHONEbutton....

4-44DPT Features
C4.2DPT Features
Call Transfer — to Extension
Allows you to perform a Screened or Unscreened Call Transfer to another extension.  A
call can also be transferred to an extension by using the DSS button,if it is programmed.
Screened Call Transfer
While having a conversation;
1.Press the TRANSFERbutton.
•The other party is placed on hold.
•You hear a confirmation tone and then a dial tone.
2.Dial the extension numberwhere the call is to be transferred.
•You hear a ringback tone.
3.Wait for...

DPT Features4-45
4.2DPT FeaturesC
Call Transfer using a DSS button
Allows you to perform a Screened or Unscreened Call Transfer by using a DSS button.
There are two operations,depending on whether or not One-Touch Transfer* is set.
*One-Touch Transferallows you to hold an outside call and transfer it to an extension with one key
depression.  This feature provides automatic hold and transfer,without pressing the TRANSFER
button.  System Programming is required to use this function.
“One-Touch...

4-46DPT Features
C4.2DPT Features
Programming References
•Station Programming (Section 2)
Flexible Button Assignment — DSS Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
•System Programming — Installation Manual
[108]One-Touch Transfer by DSS Button
[201]Transfer Recall Time
[990]System Additional Information,Fields (1),(11)
Feature References
Transfer Recall (®see Installation Manual) 

DPT Features4-47
4.2DPT FeaturesC
1
HOLD
2
COINTERCOMor
Call Waiting
During a conversation,a Call Waiting tone informs you that there is a call waiting.  You
can answer the second call by disconnecting or placing the current call on hold.
Setting / Cancelling
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Dial the feature number(731).
3.Dial 1or 0.
- 1 :to set
- 0 :to cancel
•You hear a confirmation tone and then a dial tone.
•The display shows:
— (when setting)
or
— (when cancelling)
4.Hang...

4-48DPT Features
C4.2DPT Features
Conditions
•A Call Waiting tone is generated at the extension under the following conditions.
1) When an outside call is received,or
2) When another extension executes the “Busy Station Signaling (BSS)”feature.
•If the called party has a telephone which can activate “Off-Hook Call Announcement
(OHCA),”this feature is overridden.
•Setting “Data Line Security”temporarily cancels this feature.
•You can change the desired Call Waiting tone (Tone 1 or Tone 2).
Programming...

DPT Features4-49
4.2DPT FeaturesC
CO Incoming Call Information Display
Provides you with incoming outside call information on an ISDN line provided with the
CLIP feature*.  You can also record the information.
Display Operation (— for KX-T7235 / KX-T7436)
When you receive a CO incoming call,the display shows one of
the followings.
•The caller’s telephone number and name
•The CO line number and CO line name
•The called party’s DDI number and name
1.Lift the handset or press the SP-PHONEbutton. 
•The...

4-50DPT Features
C4.2DPT Features
Display Operation (— for KX-T7230 / KX-T7433)
Provides you with incoming outside call information on an ISDN
line provided with the CLIP feature.*  You can also record the
information.
•The caller’s telephone number and name
•The CO line number and CO line name
•The called party’s DDI number and name
1.Lift the handset or press the SP-PHONEbutton. 
•The display changes as shown to the left.
•If you want the normal display,press the SHIFT button.
The button line of the...

DPT Features4-51
4.2DPT FeaturesC
Programming References
•User Programming (Section 3) / System Programming (Installation Manual)
[001]System Speed Dialling Number Set
[002]System Speed Dialling Name Set
•System Programming — Installation Manual
[622]Incoming Call Display
Feature References
CO Incoming Call Information Log
CO Incoming Call Information Log Lock
CO Incoming Call Information Log Mode